REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION DB SUBMAIN WIRING EARTHING INCLUDING FITTINGS FIXTURES IN TAB VB MESS INCL KITCHEN EQPT AROGYAM RAMAN HALL AT SOUTH COMPLEX UNDER GE IMA DEHRADUN

Amount

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as specified and directed.

M&L for modular point wiring with single core PVC insulated unsheathed 1100 volt grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 25 mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawl plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of modular flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. Make of cable: Grandlay/Anchor/Havells/SCI , Make of conduit:- AKG Plastic Ltd, Finolex, Bhagwati Agriculture. Notes: 1 The contract site mainly comprises of OTMs where point wiring may exceed its standard length. 2. The standard safety equipments and tools & plants including ladders etc to electricians / helpers will be provided by the Contractor without any additional cost to the department . 3. The contractor will make good of disturbed surfaces with material (incl plaster,putty) required to matchup with existing surfaces without any additional cost to the dept. This condition applies to all the materials in the BOQ.

All as per Srl item No 2 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 2 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per item No 2 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete.

All as per Srl item No 2 above but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

S&F Modular switch single pole one way 6/10 amp white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

S&F Modular switch single pole one way 16 amp white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

S&F Modular bell push, 6 amp 240 volts white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

S&F door bell ding dong type, AC, 240 volts, single pole complete all as specified and directed by Engr-In-Charge.

S&F Modular socket outlet 2/3 pin combined 2 module 16 amp white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

S&F Modular socket outlet 2/3 pin combined 2 module 6 amp white in colour complete all as specified and directed by Engr-In-Charge. Make -Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

S&F ceiling rose 3 phase pvc/polycarbonate, isolated body white in colour complete all as specified and directed by Engr-In-Charge. Make - Anchor/Crabtree/SSK

S&F Angle holder, insulated polycabonate body with back plate white in colour suitable for batten fittings including one number LED lamp 9 watt complete all as specified and directed by Engr-In-Charge. Make of Angle holder: Cona/Havells/Anchor Make of Bulb: Havells/Crompton/Philips

S&F modular fan step regulator 100 W 2 module white in colour complete complete all as specified and directed by Engr-In-Charge. Make -Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)

S&F LED tubelight batten fitting 20 Watt made of aluminium housing suitable for fixing on walls/ceiling, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: BRIGHT LINEA of Crompton/LUMILINE PLUS NEO of Havells/ Essential SmartBright Batten of Philips

S&F LED flood light fitting 50 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs with IP66 protection suitable for fixing on walls, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: ROVER of Crompton/JETA QUANTO PLUS of Havells/Uniflood of Philips

S&F LED tubelight batten fitting 10/12 Watt made of aluminium housing suitable for fixing on walls/ceiling including connections, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: Trim Linea Neu of Crompton/SmartBright of Philips/ENDURA LINEAR NEO of Havells

S&F LED bulk head fitting 10 W including connection complete all as specified and directed by Engr-In-Charge.Make- STUD of Crompton/RUGBY GENX 10 of Havells or equivalent in Philips as approved.

Supplying, fixing & testing LED 36 Watts,2'x2' recessed ceiling light fitting,warm /natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- POLARIS NIO I-II of Crompton/VENUS NEO 2X2 of Havells/SmartGlow of Philips as approved.

Supplying, fixing & testing LED 34/36 Watts,2'x2' surface mounted ceiling light fitting,warm /natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- POLARIS NIO III LCTLSNE-36-FO-CDL of Crompton/PLUTO PANEL (SURFACE) of Havells or equivalent in Philips as approved.

Supplying, fixing & testing LED 15/16 Watt surface mounted round/square ceiling light fitting,warm /natural/ cool white as per requirement at site made of aluminium housing high translucent frosted plastic diffuser with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- PEARL NIO-S of Crompton/INTEGRA NXT SURFACE ROUND/SQUARE of Havells/Sleek Surface Downlight of Philips as approved.

Supplying, fixing & testing LED 18 Watt recess mounted round ceiling light fitting,warm /natural/ cool white as per requirement at site made of aluminium housing high translucent frosted plastic diffuser with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- PEARL ULTIMA of Crompton/INTEGRA HE of Havells/GreenPerform Sleek of Philips as approved.

S&F plug and socket metal enclosure box of module (2P+E- SP), IK 08, supplied with Neutral Links complete with one MCB SP 20 amp,240 Volts recess mounted with chained metal cover for the socket outlet complete all as specified and directed by Engr-In-Charge.Make: Legrand/Indo Asian/HPL/HAVELLS

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit of size not less than 25 mm dia in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unsv submain wiring of following sizes complete all as specified and directed. Make of wire: Havells/ Polycab /Grandlay/SCI Make of conduit: Finolex/AKG plastic Ltd./ Bhagwati agriculture. Note: (i) Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.

2 x 10 Sqmm + 1 x 10 Sqmm

2 x 6 Sqmm + 1 x 6 Sqmm

2 x 4 Sqmm + 1 x 4 Sqmm

4 x 10 Sqmm + 1 x 10 Sqmm

S & F VTPN Distribution boards epoxy powder coated fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with fully insulated 250 Amps copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 IK -09, ,415 volt with provision for 160/200 Amp MCCB FP as incomer and SP MCBs or TP MCBs as per site requirement (or any combination of SP/TP MCBs) outgoings of following capacity .

4 Way VTPN DB (FP MCCB + 12 MCBs). Make: 507745 of Legrand or equivalent in Havells, Indo Asian,HPL

8 WAY VTPN DB TP&N DB(FP MCCB + 24 MCB,s) Make: 507747 of Legrand or equivalent in Havells, Indo Asian,HPL

12 WAY VTPN DB TP&N DB(FP MCCB + 36MCB,s) Make: 507748 of Legrand or equivalent in Havells, Indo Asian,HPL

S & F in repair MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door with provision for 01 x 40 to 63 A SPN MCB as incoming and MCB SP 6 to 32A as out going as per way of DB.The DBs should be supplied with tin platted insulated copper bus bar rated for 200A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed of following capacity:- Make: Legrand/ Havells/ Indo Asian/HPL

4 way SPN DB.

8 way SPN DB.

12way SPN DB.

S & F in repairs MCCB ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting complete all as specified and directed of following capacity. Make:- Legrand/Havells/Indo Asian/HPL

100 Amps 3 pole with rupturing capacity 16 KA.

125 Amps 3 pole with rupturing capacity 16 KA.

160 Amps 4 pole with rupturing capacity 36 KA.

200 Amps 4 pole with rupturing capacity 36 KA.

S & F in repairs MCB SP complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable complete all as directed of follwing capacity: Make:- Legrand/Havells/Indo Asian/HPL

MCB SP 6 to 32 Amp.240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in repairs MCB TPN/FP 40 to 100 Amp as per requirement complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable complete all as directed. Make:- Legrand/Havells/Indo Asian/HPL

S & F in repair TPN DB 4 way complying with IEC 61439 -1 & 3., sheet metal enclosures double door with provision for 01 x 63/100 A `TPN MCB as incoming and MCB SP 6 to 32A as out going as per way of DB.The DBs should be supplied with tin platted insulated copper bus bar rated for 200A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. Make: Legrand/ Havells/ Indo Asian/HPL

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20 mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

S&F in replacement of UNSV rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of following sizes:- Make:- AKG plastic Ltd./ Bhagwati Agriculture/Finolex.

25 mm dia

S& F modular fitting /fixture in repairs including taking down old unsv fitting/fixture of following specification:- Make: Anchor/Legrand/Havells

Fan regulator modular step type 100W 240 volts 2 module.

Modular switch single pole one way 6 Amp 240 volts.

Modular switch single pole one way 16 Amp 240 volts .

Modular socket outlet 2/3 pin combined 6 Amp 240 volts.

Modular socket outlet 2/3 pin combined 16 Amp 240 volts.

Modular bell push flush type, 6 Amps 240Volts.

S& F fitting /fixture in repairs including taking down old unsv fitting/fixture of following specification:- Make: Anchor/Legrand/Havells

Fan regulator step type 100W 240 volts 2 module.

piano type switch single pole one way 6 Amp 240 volts.

piano type switch single pole one way 16 Amp 240 volts .

socket outlet 2/3 pin combined 6 Amp 240 volts.

socket outlet 2/3 pin combined 16 Amp 240 volts.

S&F modular switch socket combination box 16 Amp, 6 pin, 3 module (2 hole complete with suitable connection with 2x2.5 sqmm and 1x1.5 sqmm single core cable length upto 01 mtr complete all as specified and directed by Engr-In-Charge. Make: Anchor/Havells/ Legrand as approved.

S&F in repairs white modular cover plate with frame of following module complete including taking down old unsv modular cover plate with frame all as directed. Make: Anchor/Legrand/Havells

1Module

2Module

3Module

4Module

6Module

8 Module

12 module

S&F in repairs modular metal flush box of following module complete including taking down old unsv modular metal flush box with frame all as directed. Make: Anchor/Indo Asian/Havells

1Module

2Module

3Module

4Module

6Module

8 Module

12 module

S&F plug top 3 pin 16 Amp 240 V plastic body white in colour complete all as specified and directed by Engr-in-Charge.Make: Anchor/legrand/havells/HPL

Supplying, fixing & testing LED 36/40 Watts,4'x1' recess ceiling light fitting suitable for POP/grid ceiling,warm /natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- SPAN LCTLRNE-40-CDL(1X4) of Crompton/PLUTO NEO PANEL 4X1 of Havells/ FullGlow 1'x4' of Philips as approved. Note: It is to be noted that any gap created by dismantling old light and fixing the LED light will be filled with POP and match with the existing surface.

Supplying, fixing & testing LED 36/40 Watts,4'x1' surface mounted ceiling light fitting suitable for POP ceiling,warm /natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- SPAN LCTLSNE-40-CDL(1X4) of Crompton PLUTO NEO PANEL 4X1 of Havells/FullGlow 1'x4' of Philips as approved.

Supplying, fixing & testing LED 24 Watts,1'x1' recessed ceiling light fitting suitable for POP ceiling,warm /natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- POLARIS NIO I-II LCTLRNE-24-CDL(1'x1') of Crompton/PLUTO 1X1 of Havells or equivalent in Philips as approved.

S & F in repair sheet metal enclosure, Triple pole and neutral with three pin and earth plug and socket with and including one triple pole MCB 32 Amps, 240 volts,10 KA , including taking down old unsv sheet metal enclosure complete all as directed. Make:- Havells/Legrand/Indo Asian.

Supply, fixing, connecting and commissioning LT panel board outdoor front and back open able and lockable type size 1580x1500x600mm made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURE, complete UV resistance , anti acid and anti corrosive with degree of protection against mechanical load IK08(5 Joule) and against ingress protection IP-65 in accordance with IEC 60529.The panel shall consist of the following and having necessary fixing arrangement with MS base channel/angle iron legs suitable size and PCC pedestal :- (A) Incomer : (a) MCCB 4 pole 400 Amps 415 Volts50 Hz 35 KA . Make : Legrand/Havells/ Indo Asian/HPL. (b) Tinned copper TPN bus bar of rating 400 amps duly insulated with colour coded heat shrinkable sleeves mounted on epoxy/DMC insulators. (c) RYB indication lamps -03 Nos (d) Digital Voltmeter and Ammeter of size 96mm x 96mm along with Current Transformer400/5A,5VA,CL.1-03 Nos Make – Schneider/HPL/ L&T (B) Outgoing :- (a) MCCB 4 pole 200 Amps, 25 KA – 01 Nos (b) MCCB 4 pole 160 Amps, 25 KA – 01 Nos (c) MCCB 4 pole 100 Amps, 25 KA – 04 Nos Make of MCCB :- Legrand/Havells/ Indo Asian. (c) 35 Sq Mm Terminal-16 Nos

Note :- 1. The manufacturer of board/panel shall submit a copy of CPRI TEST REPORT OF DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane. 2. The manufacturer of board / panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI report shall have mention of following tests performed and passed out satisfactorily: 1. Temperature Rise. 2. Dielectric Properties. 3. Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current.. • Make of Panel :- Shalabh(India) Ind, Bright Panels, M/S Elite Panels

All as per item ser No 44 herein before but panel of size 1580x1800x600 mm with the following incoming and outgoing :- (A) Incomer : (a) MCCB 4 pole 400 Amps 415 Volts50 Hz 35 KA . Make : Legrand/Havells/ Indo Asian/HPL. (b) Tinned copper TPN bus bar of rating 400 amps duly insulated with colour coded heat shrinkable sleeves mounted on epoxy/DMC insulators. (c) RYB indication lamps -03 Nos (d) Digital Voltmeter and Ammeter of size 96mm x 96mm along with Current Transformer400/5A,5VA,CL.1-03 Nos Make – Schneider/HPL/ L&T (B) Outgoing :- (a) MCCB 4 pole 125 Amps, 25 KA – 03 Nos (b) MCCB 4 pole 100 Amps, 25 KA – 04 Nos (c) MCCB 4 pole 63 Amps, 25 KA – 01 Nos Make of MCCB :- Legrand/Havells/ Indo Asian/HPL (c) 50 Sq Mm Terminal Block-12 Nos (d) 35 sq Terminal block-16 Nos (e) 16 Sq mm Terminal Block-04 Nos • Make of Panel :- Shalabh(India) Ind, Bright Panels, M/S Elite Panels

All as per item ser No 44 herein before but panel of size 1730x1800x750 mm with the following incoming and outgoing :- (A) Incomer : (a) MCCB 4 pole 250 Amps 415 Volts 25 KA-01 Nos .(b) Change Over Switch(Onload) 4 Pole 250 Amp-01 Nos Make Of MCCB/COS : Legrand/Havells/ Indo Asian/HPL. (c) Tinned copper TPN bus bar of rating 250 amps duly insulated with colour coded heat shrinkable sleeves mounted on epoxy/DMC insulators. (d) RYB indication lamps -03 Nos (e) Digital Voltmeter and Ammeter of size 96mm x 96mm along with Current Transformer250/5A,5VA,CL.1-03 Nos Make – Schneider/HPL/ L&T (B) Outgoing :- (a) Change Over Switch(Onload) 4 Pole 250 Amp-01 Nos (b) 63 Amps DP MCB Type Chnage Over Switch – 01 Nos (c) MCCB 4 pole 100 Amps, 25 KA – 01 Nos (d) 32 Amp TP 10 KA MCB -06 Nos Make of MCCB/COS/MCB :- Legrand/Havells/ Indo Asian. (c) 120 Sq Mm Terminal Block-08 Nos (d) 16 sq Terminal block-02 Nos (e) 6 Sq mm Terminal Block-24 Nos • Make of Panel :- Shalabh(India) Ind, Bright Panels, M/S Elite Panels

All as per item ser No 44 herein before but panel of size 500x985x615 mm with the following incoming and outgoing :- (A) Incomer : (a) Tinned copper TPN bus bar of rating 250 amps duly insulated with colour coded heat shrinkable sleeves mounted on epoxy/DMC insulators alongwith RYB indication lamps. (b) Foot Mounted Make of DB :- Legrand, Havells, Indo Asian,HPL. Make of Panel :- Shalabh(India) Ind, Bright Panels, M/S Elite Panels

All as per item ser No 44 herein before but panel of size 800x985x600 mm with the following incoming and outgoing :- (A) Incomer : (a) MCCB 4 pole 250 Amps 415 Volts 25 KA-01 Nos Make Of MCCB: Legrand/ Havells/ Indo Asian. (b) Tinned copper TPN bus bar of rating 250 amps duly insulated with colour coded heat shrinkable sleeves mounted on epoxy/DMC insulators alongwith RYB indication lamps. (c) Foot Mounted Make of DB :- Legrand, Havells, Indo Asian,HPL. Make of Panel :- Shalabh(India) Ind, Bright Panels, M/S Elite Panels

All as per item ser No 44 herein before but panel of size 500x835x600 mm with the following incoming and outgoing :- (A) Incomer : (a) MCCB 4 pole 100 Amps 415 Volts 25 KA-01 Nos Make Of MCCB: Legrand/Havells/ Indo Asian. (b) Tinned copper TPN bus bar of rating 250 amps duly insulated with colour coded heat shrinkable sleeves mounted on epoxy/DMC insulators alongwith RYB indication lamps. (c) Foot Mounted Make of DB :- Legrand, Havells, Indo Asian,HPL. Make of Panel :- Shalabh(India) Ind, Bright Panels, M/S Elite Panels

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 4 core complete all as specified and directed. Make: Havells/Grandlay/SCI.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 4 core complete all as specified and directed. Make: Havells/Grandlay/SCI

Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. including removing cable protection covers/ bricks complete all as specified and directed. Notes : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection. (ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations.

Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed.

Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed.

M&L for old size sub class `B` bricks, kiln burnt, as in cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed .

Supplying, laying & jointing GI water tubing, 50 mm bore, medium grade as in sleeving etc laid in trenches/fixed to walls etc. complete all as specified and directed by Engineer-in-Charge.(MAKE : TATA/JINDAL HISSAR/SURYA ROSHANI LTD)

S&F electric pvc casing caping trunking system of size 100 x 100 mm ISI marked and laying the cables inside the trunking system for proper mounting on the walls complete all as specified and directed by Engr-In-Charge. Make:- AKG plastic Ltd., Bhagwati Agriculture, Finolex.

S&F LED decorative wall light fitting made of stainless steel, rust free fixture with glass diffuser along with 9 Watt LED Bulb complete all as specified and directed by Engr-In-Charge. Make: Florette WL 1LS E27 SS of Havells or equivalent in Crompton/Philips

PARADISE INFRA POWER COMPANY (BID ID -3085923)

A ONE BUILDERS AND ENGINEERS (BID ID -3087240)

M/S K K ENTERPRISES (BID ID -3086228)

Defence Auto Works (BID ID -3087482)

JS CONSTRUCTION COMPANY (BID ID -3084205)

M/S BABA ENTERPRISES (BID ID -3094506)

Balraj and Co (BID ID -3086292)

Bhanu Prakash (BID ID -3087449)