Karnataka

Active

Works

Buildings

Construction of Hirisave I.B. Building in Channarayapatna Taluk.

Public Works Department

PWD Division Office Hassan | Hassan, Karnataka

Amount: ₹1.6 CrCloses: 28 Aug 2026Due tomorrow

Timeline

Published10 Aug 2026
Pre-Bid Meeting20 Aug 2026
Closes28 Aug 2026
Bid Opening29 Aug 2026

Tender Value

₹1.6 Cr

EMD Value

₹2.4 L

Closing Date

28 Aug 2026, 9:30 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Bharath

Office Number

08172268437

Mobile Number

9844276898

Work Description

Construction of Hirisave I.B. Building in Channarayapatna Taluk.

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT37113

Reference Number

PWD/2026-27/BD/WORK_INDENT37113

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Hassan

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredContractors has to upload the EPF Registration

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2021-22, 2022-23, 2023-24, 2024-25,2025-26 as per KW-4 Rs. 321.00 Lakhs

RequiredWork done certificate as per KW-4 50 percent amount put to tender i.e., Rs.80.25 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredElectrical worksone Certicate of Rs.8.35 Lakhs

RequiredBuilding water supply/ sanitary works worksone Certicate of Rs.2.00 Lakhs

RequiredLine of credit as per KW-4 Rs. 53.50 Lakhs

RequiredAssessed available tender capacity-AxNx1.5 -B should be greater than or equal to Rs.160.50 Lakhs

RequiredMinimum quantities of work 1 Earthwork/Embankment-1262.00 Cum,2.PCC/RCC-376.00 Cum,3.SSM 128.00Cum,4.Flooring-338.00 Sqm,5.Palstering-2391.00 Sqm,6.Painting-2437.00 Sqm,7.Steel-24.50Tonne, 8.M.S.Grills work-2534.00kgs 9 Brick work-120.00Cum.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer is not responsible for any delay in accessing E-Procurement Portal

The employer reserves the rights to reject one or all Tender without assigning any reasons

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Successful bidder has to furnish 0.1% of award contract amount as insurance during entering in to agreement.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the original documents before approval.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

The Contractor has to establish site laboratories and should furnish the documents for having required lab testing equipments. (For works more than Rs.1.00 crore)

Contractors should be registered with KPWD Class III and above Registration.

To qualify for award of this contract, each tenderer should give all details and documents as per K.W Document.

The period of completion of this work is 9 Months

The eligible contractor should maintain the work FOR ONE YEAR AFTER THE SUCCESSFUL COMPLETION OF THE PROJECT.

Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

Contractors has to upload the EPF Registration

Contractors has to submit their labour EPF details with every Running Bill

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Hassa, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per govt Circular No:FD 417 Exp-12/2024, Banglore Dtd:09.08.2024 and prevailing GST (18% of amount put to tender) amount is kept in form of Lumpsum in sanctioned estimate. Therefore amount put to tender and ECV amount are excluding GST. But the itemwise rates do not include GST. Hence GST will be paid separately for the executed amount accordingly

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.1) only. Otherwise tender is liable for rejection.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the KW Standard Tender documents.

Regarding Appealing aggrieved contractor may appeal to the prescribed (Appellant) Authority within 30 days as per KTTP and appeal should be trough eproc only as per Govt: Order No.pwd/572/CRN-2020 Bangalore Dt:09.10.2020. same will not be considered if appeal through Letters.

The FSD payable at the time of executing agreement, will be refunded only after successful completion of Defect Liability Period

Work should be carried out as per K/W-4 STD attached with tender .

The successful contractor has to submit barchart for the progress of work and period of completion

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.10) only. Otherwise tender is liable for rejection.

The Contractor has to establish Field laboratories and should furnish the documents for having required lab testing equipments.

Technical Criteria

General

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e.,2021-22, 2022-23, 2023-24, 2024-25,2025-26 (b) Mandating Satisfactorily completed (atleast 90% of the contract value) as prime contractor, for atleast one similar work to an extent of 50 percent of the cost of the work for all the works value not less than Rs.80.25 Lakhs (Updated to 2026-27 Price Level)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

The tenderer or his identified sub contractor should possess required valid electrical license for executing building Electrification works and should have executed similar works totaling Rs. 8.35 Lakhs in any one year during last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25,2025-26 (Updated to 2026-27 Price level)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

The tenderer or his identified sub contractor should possess required valid license for executing building water supply/ sanitary works and should have executed similar works totaling Rs. 2.00 Lakhs in any one year during last five years i.e.,2021-22, 2022-23, 2023-24, 2024-25,2025-26 (Updated to 2026-27 Price level)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2 (c) Executed in any one year i.e 2021-22, 2022-23, 2023-24, 2024-25,2025-26 the following Minimum quantities of work 1.Earthwork/Embankment -1262.00 Cum, 2.PCC/RCC-376.00 Cum,3. SSM:128.00 Cum,4. Flooring-338.00 Sqm,5.Palstering-2391.00 Sqm,6.Painting-2437.00 Sqm,7. Steel-24.50 Tonne,8.M.S.Grills work-2534.00 kgs,9.Brick work-120.00 Cum, (usually 80 percent of peak annual rate of construction)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

Capabilities of Vendor

ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity:(AxNx1.5 -B ) should be greater than or equal to Rs.160.50lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (updated to 2026-27 price level) N-Number of years prescribed for completion of the works for which tenders are invited-9 Months. B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 9 Months (Period of completion of the works for which tenders are invited)

Others -- Submit information as per Section 3 of Tender Document

Financial Status

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2021-22, 2022-23, 2023-24, 2024-25,2025-26 (a) Achieved in atleast two financial years a minimum financial turnover of Rs. 321.00 Lakhs (in all classes of civil engineering construction works only) (Updated to 2026-27 Price Level) (Usually not less than two times the estimated annual payments under this contract)

Others -- Balance Sheets, Profit & Loss Statements certified from an Registered Chartered Accountant with UDIN

ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs. 53.50 Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually the equivalent of the estimated cash flow for three months in the peak construction period) (The fomat should be as per KW-4 Bid document Section-3 Para 1.10)

Others -- Certificate from Schedule Bank in the prescribed form as per KW-4

Others

KPWD Class-III and above Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Contractors has to upload the EPF Registration

Valid EPF Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹4,010

EMD Fee Amount

₹2.4 L

Important Dates

Last Activity

10 Aug 2026

Published

10 Aug 2026

Bid Opening

29 Aug 2026

Download Ends

24 Aug 2026

Pre-Bid Meeting

20 Aug 2026

BOQ Preview

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 300 mm to 600 mm. Ref to MoRT&H : IRC - 201 ---- With all lead and lift including cost and ...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of clasS designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materi...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) a...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...

•

Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and remov- ing scaffolding, including cost of materials, labour, curing...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever require...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing and fixing bright finished brass hanging type floor door stopper

•

with necessary screws, etc. complete. ---- With all lead and lift including cost and conveyance of all materials,labour, hire...

•

Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. complete ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of ...

•

Providing and fixing bright finished brass tower bolts (barrel type) with

•

necessary screws etc. complete : 250x10mm ---- With all lead and lift including cost and conveyance of all materials,labour, h...

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete : 125x85x5.5 mm (heavy type) ---- With all lead and lift including cost and conveyance of all materials,labou...

•

Providing and fixing chromium plated brass curtain rod with ISI mark hav- ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherev...

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- With all lead and lift including cost and conveya...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above...

•

Providing & Fixing Chicken Mesh for column & Beam junction

•

---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and al...

•

Providing & Fixing Hold fasts for doors ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charg...

•

Providing & fixing Structurals such as tees,angles channels and R.S. Joists ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equip...

•

Water Supply & Sanitary Works

•

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries ...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks ---- With all lead and lift including cost and conveyance of all materials,labo...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- With all lead and lift including cost and conve...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 50 mm nominal bore ---- With all lead and lift including cost and conveyance of all materi...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 25 mm nominal bore ---- With all lead and lift including cost and conveyance of all materi...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 32 mm nominal bore ---- With all lead and lift including cost and conveyance of all materi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & w...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Providing and fixing C.P. Brass long body bibcock 15 mm ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other ...

•

Providing and fixing C.P. Brass bibcock 15 mm

•

---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incid...

•

Providing and fixing 125 mm grating with waste hole

•

---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other...

•

Providing and fixing 110 mm dia PVC Tee

•

---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental ...

•

Providing and fixing 110 mm dia PVC BEND

•

---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental...

•

Sinking Borewell

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ---- With all l...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. ---- With all lead...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 65 mm ---- With all lead and lift including cost and conveyance o...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 65 mm ---- With all lead and lift including cost and convey...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

M.S.Pipe 150 mm dia casing pipe ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,...

•

Electrification work

•

Open Conduit System : Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plu...

•

Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running befo...

•

Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing PVC/metal conduit Deep junction box a) 25mm deep junction box[ Chapter-1.I.no.1.5.2] ---- With all lead and lift including cost and conveyance of all materials,labour, hire charge...

•

Supplyin and Fixing Metal Fan Box with Round Hook. [ Chapter-1.I.no.1.13] ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipme...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and Virg...

•

Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring a...

•

Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall [...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [ Chapter-3, I.No.3.6.1, 3.6.2, 3.6.3, 3.6.4, 3.6.9, 3.6.8, 3.6.9,3.6.10, 3....

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. [ Chapter-3, I.No.3.14.6] a) 6Amps Pendent holder ---- With all lead and lift including cost and conveyan...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. [Chapter-5.I.no.5.7.4] b) 100 Amps ---- With all lead and lift including cos...

•

Supplying of on load change over switches 4 poles, AC 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) [ Chapter-5, I.no. 5.12.2 ] 100 A ---- With all lead a...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying, fixing and wiring Residual Current Circuit Breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. [ Chapter.5.I.no. 5.20.1 ] 16-25Amps2pole ---- With all lead and lift ...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. [ Chapter-5, I.no.5.35] - ---- With all lead and lift includi...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

•

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer [ Chapter-5, I.no.5.36] - ---- With all lead and lift including cost and conveyance of all materials,labour, hir...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. [ Chapter-5, I.no. 5.38 ] - ---- With all lead and lift including cost and ...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 5...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply [ Chapter-6, I.no.6.1] - ---- With all lead and lift incl...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...

•

Supplying wall mounting fan suitable to operate at single-phase 230v AC. supply.400 mm Sweep [ Chapter-6, I.no.6.5.2] - ---- With all lead and lift including cost and conveyance of all materials,labou...

•

Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor c...

•

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

•

Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool bet...

•

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. [ Chapter-8,I.no.8.3] - ---- With all lead and lift including cost and conveyance of all materials,...

•

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.2 Pair [ Chapter-8,I.no.8.2.2] - ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

•

Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete.3 kVA O...

•

Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries 150 AH capacity [ Chapter-9,I.no.9.5.9] - ---- With al...

•

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...

•

Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, alumi...

•

Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power fac...

•

Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT ...

•

Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life25000 burning hours and Compliance...

•

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. [ Chapter-12.I.no.12.2.1] ---- With a...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. [ Chapter-13.I.no.13.14] -...

•

Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm b...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter boar during 40mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 35 Sq...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm [BESCO.SR 2023-24.Labour commom SR.P.No.5...

•

Providing ABC Powder based MAP50,4Kg Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50,Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can...

•

Supplying and installation of RUBBERMAT 1mtrx1mtr-10mm thick.Complete including cost of materials, labour, usage charges of machinery complete as per specifications. [Chapter-15. I.no.15.117] ---- Wit...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm [ W.S & UGD SR-2023-24 Chapter-13 I.No.13.24.1] (V-5) -...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw4-37113.doc

Tender Document • 2.60 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].