SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH 05(FIVE) YEARS O&M AT ICHHAPORE SEWAGE PUMPING STATION OF DRAINAGE DEPARTMENT.

Name of Work:- SETC OF ELECTRICAL, MECHANICAL AND

INSTRUMENTATION WORK WITH 05(FIVE) YEARS O&M

AT ICHHAPORE SEWAGE PUMPING STATION OF

DRAINAGE DEPARTMENT.

LAST DATE OF SUBMISSION OF TENDER FEE : From Dt. 29-01-2026 to

&E.M.D IN HARD COPY 05-02-2026 up to

(BY SPEED POST / RPAD THROUGH POSTAL AUTHORITY ONLY)

LAST DATE OF ONLINE SUBMISSION OF : Up to Dt. 28-01-2026 up

TENDER (ALONG WITH NECESSARY to 18.00 Hrs.

DOCUMENTS, CERTIFICATES ETC.)

SCHEDULE-B2 OPERATION & MAINTENANCE WORK ..............................................................

1 The Schedule of quantities and Rates are to be read for the purpose of

pricing in conjunction with instructions to tenderers, technical

specifications, drawings and conditions for contract.

2 The price quoted in the summary of costs, sheets of schedule of quantities

and rates shall be of all-inclusive value for the work described including

all cost and expenses which may be required for the execution of the work

described together with all general risks, liabilities and obligations set

further or implied in the documents on which the tender is based.

3 The quantities furnished are approximate. In the event of actual quantities

varying from those furnished herein or items deleted or added the

percentage (Plus / minus) quoted for the entire work shall remain firm

and no extra claims in this respect will be entertained. The payment shall

be made based on the actual quantities in the complete work.

4 Percentage (Plus/Equal/ Minus) quoted by tenderer shall be firm even if

the scope in the contract reduced/increased.

5 Percentage (Plus/Minus) and the total amount entertained in the

5 Percentage (Plus/Minus) and the total amount entertained in the

summary of cost, sheet of schedule quantities and rates shall be given on-

6 Detailed specifications of items of work are described in the Technical

Specifications. It gives guidelines to the reference of relevant clauses of

specification and mode of measurement. Tenderer shall read this in

conjunction with other technical specifications and quote rates

7 The Quality Assurance Plan provided shall be strictly followed.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH 05(FIVE)

YEARS O&M AT ICHHAPORE SEWAGE PUMPING STATION OF DRAINAGE DEPARTMENT.

I/We, the undersigned, hereby tender for carrying out the work described in the schedule

subjected to the conditions mentioned in various sections and subsections of this tender

Should this tender be accepted, I/We hereby agree to abide by and to fulfill all the terms and

provisions of specifications and conditions of contract and default thereof of forfeit and pay

to Municipal Corporation the sum of money mentioned in the said condition.

The Earnest Money Deposited by me / us with tender may be forfeited to The SURAT

MUNICIPAL CORPORATION, if I /We do not deposit security deposit in accordance with

the relevant clause of the conditions of contract, otherwise the said sum of

3,78,200.00/-(Without GST) shall be retained by the Municipal Corporation as any

account of such security as, aforesaid.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

3 . NAMEOFWORK: -

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH

05(FIVE) YEARS O&M AT ICHHAPORE SEWAGE PUMPING STATION OF

DRAINAGE DEPARTMENT.

ESTIMATED COST: 3,78,17,300.00 /-[Excluding GST]

TENDERER’S BID FOR CAPITAL WORK:

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs.2,76,65,300.00/-

INFIGURES:(STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDER AMOUNT (IN FIGURES): Rs.

TENDER AMOUNT (in WORDS): Rs.

TENDERER’S BID FOR O&M WORK:

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs.1,01,52,000.00/-

INFIGURES: (STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDER AMOUNT (IN FIGURES): Rs.

TENDER AMOUNT (in WORDS): Rs.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATUREOFWITNESS:

NAMEANDADDRESS:

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

4. SCHEDULE- B ABSTRACT

Sr. No. Description Total Amount

Sr. No. Description Total Amount

A Electro-Mechanical (Capital) Work for ICHHAPORE SPS

B O&M Work for ICHHAPORE SPS

Total Amount of Schedule B

Total Amount of Schedule B

(Excluding GST)

SCHEDULE-B1 ELECTRO-MECHANICALWORK

SR. DESCRIPTION QTY. UNIT UNIT TOTAL

MECHANICAL ITEMS

1 NON CLOG SEWAGE 2 Set 12,00,139.57

SUBMERSIBLE PUMP SETS -1

Supply, installation ,testing and

commissioning of Non Clog sewage

Submersible Pump Sets having with

motor as per specification.

Capacity: 145 LPS, Head: 23 MT.

(Approx. 75 KW, 100 HP)

2 NON CLOG SEWAGE 2 Set 7,08,778.61

SUBMERSIBLE PUMP SETS -2

Supply, installation, testing and

commissioning of Non Clog sewage

Submersible Pump Sets having with

motor as per specification.

Capacity: 75 LPS, Head: 23 MT.

(Approx. 37 KW, 50 HP)

3 KNIFE GATE VALVE 2 Set 34,194.92

Supply, Installation, Testing and

Commissioning of Manually operated

Knife gate valves for the discharge line

of Pump Sets as per Detailed Tender

Size: 300 mm Día

Location: Delivery of Pump sets -1

Mode of Operating: Manual

4 KNIFE GATE VALVE 2 Set 23,813.56

Supply, Installation, Testing and

Commissioning of Manually operated

Knife gate valves for the discharge line

of Pump Sets as per Detailed Tender

Size: 200 mm Día

Location: Delivery of Pump sets -2

Mode of Operating: Manual

5 NON RETURN VALVE 2 Set 36,547.86

Supply, Installation, Testing and

Commissioning of Non Return Valve as

per detailed tender specification.

Size: 300 mm Día

Location: Delivery of Pump sets-1

6 NON RETURN VALVE 2 Set 16,837.71

Supply, Installation, Testing and

Commissioning of Non Return Valve as

per detailed tender specification.

Size: 200 mm Día

Location: Delivery of Pump sets-2

7 C.I. DISMANTLING JOINT 2 Nos. 17,159.53

Supply, installation, testing and

commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature :50 C.

Size: 300 mm Dia

8 C.I. DISMANTLING JOINT 2 Nos. 11,059.32

Supply, installation, testing and

commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature: 50 C.

Size: 200 mm Dia

9 LIFTING ARRENGMENT 2500 Kgs. 243.16

Supply, Installation, Testing and

Commissioning of Lifting

Arrangement screen S.S material for

SPS as per Detailed Tender

10 C.I. FITTINGS & SPECIALS 1000 Kgs. 58.58

Supply, Installation, Testing and

Commissioning of C.I. as per detailed

Tender Specification.

11 KNIFE GATE VALVE 1 Nos. 3,32,457.63

Supply, Installation, Testing and

Commissioning of Knife Gate valve for

Common Header Line as per Detailed

Tender Specification

Size: 600 mm Día

Location: Common Header

Mode of Operation: Electrically

12 NON RETURN VALVE 1 Nos. 2,19,668.94

Supply, Installation, Testing and

Commissioning of Non Return Valve as

per Detailed Tender Specification

Size: 600 mm Día

Location: Common Header

13 C.I. DISMANTLING JOINT: 600 1 Nos. 51,315.25

mm for Common Header

Supply, testing & commissioning of

flange ends C.I Dismantling as per

detailed Tender Specification.

14 AIR VALVE 1 Nos. 41,866.52

Supply, Installation, Testing and

Commissioning of Air valve for

Common header line as per Detailed

Tender Specification

Size: 200 mm Día

15 5 TON EOT 1 Set 6,32,512.50

Providing & erecting Single girder type

three way direction fully electrically

operated E.O.T. crane with electrically

operated hoist, class II duty, geared

travelling trolley as per tender

Specifications.

Capacity: 5 Ton, Span: As per site

16 2 TON EOT 1 Set 5,11,312.50

Providing & erecting Single girder type

three way direction fully electrically

operated E.O.T. crane with electrically

operated hoist, class II duty, geared

travelling trolley as per tender

Specifications.

Capacity: 2 Ton, Span: As per site

17 M.S. FABRICATION WORK 10000 Kgs. 98.98

For Grills, Jalia , I Beams, Grating at

Various Opening, ISMB / Girder

Channels for EOT Crain etc.

18 S.S. FABRICATION WORK 10000 Kgs. 243.16

Various S.S Fabrication Work at

Pumping Station for Manual Screen and

Ladder, Nut and bolt for C.I. Fittings

19 S.S. PIPES & SPECIALS 25000 Kgs. 243.16

Supply, installation, testing and

commissioning of S.S. Pipes & Specials

with necessary supports & anchoring.

20 C.I. WALL THIMBLE MOUNTED 5 Nos. 6,65,633.05

Supply, Installation, Testing and

Commissioning of Wall Thimble

mounted sluice gate as per Detailed

Tender Specification

Size: 1200 mm (w) x 1200 (h) mm

Mode of Operation : Electrically

Location: Inlet, Screen Channel,

Partition, Bypass

21 Ultrasonic Type Level Transmitter 1 Nos. 60,320.23

with Integral Display:

Design, Supply, Installation, Testing

and Commissioning of Non Contact

Ultrasonic Type Level Transmitter as

per Detailed Tender Specification

Range : 0 to 15 mtr

22 Supply, Installation, Testing and 1 Nos. 17,895.18

Commissioning of Float and board type

level Indicator with all accessories as

per Detailed Tender Specification

Range : 0-15 Mtr.

23 Supplying & Fixing SMC Chequered 20 Sq. 5,897.37

plate having 12 mm thickness, made out Mt.

of SMC Confirming to IS 13410 & by

Hot press Compression Moulding

technique Suitable cut & fixed with MS

Angle Frame to Fit Trench Widths as

per site requirement approved. by

engineer incharge.

24 Supply, Installation, Testing and 40 Sq. 580.15

Commissioning of FRP Chequered Mt.

Plate as per Detailed Tender

25 Supply, Installation, Testing and 250 Rmt. 1,784.69

Commissioning of Railing as per

Detailed Tender Specification

26 ELECTROMAGNETIC FLOW 1 No. 3,06,254.22

Supply, Installation, Testing and

Commissioning of Electromagnetic

Flow Meter for Common Header as per

Detailed Tender Specification

27 DEWATERING PUMP 1 Nos. 1,64,952.19

Supply, testing & commissioning of

Dewatering Pump.

Capacity: 10 LPS, 18 Mtr Head, 5 HP

28 Supplying & erecting approved make 1 Nos. 15,129.77

self-priming domestic monoblock

water pump with 1 H.P motor, suitable

for operation on 230 volts, 50c/s. AC

supply with metallic flange, and M.S.

impeller delivery for lifting line water

to over head tank

29 CHAIN PULLEY BLOCK 1 Nos. 18,422.40

Supply, Installation, Testing and

Commissioning of 2.0 Ton Chain

Pulley Block with Triple gear

arrangement, lifting hook, load chain &

locking device for Lifting of Manually

Operated Screen and Dewatering

Lift (6m + 1m), Capacity: 2 Ton

30 Supply, Installation, Testing and 1 Nos. 12,711.86

Commissioning of Grass Cutter with

meter cable for SPS

31 Supply of Aluminium Self Supported 1 Nos. 4,661.02

"A" Type ladder (8 Feet)

32 Flexible Garden Pipe 100 Feet 29.66

33 PRESSURE GAUGE 4 Nos. 3,042.12

Design, Supply, Installation, Testing

and Commissioning of Diaphragm

sealed Pressure Gauge. (Each Pump

Range: 150 mm Dial- 0 to 4 Kg/cm2

34 PRESSURE TRANSMITTER 1 Nos. 29,438.47

Design, Supply, Installation, Testing

and Commissioning of Pressure

Transmitter. (Common Header)

35 TOOLS & TACKELS 1 Lot 51,713.42

Supply of various tools and tackles as

described in Technical Bid.

36 Construction of Necessary size M 20 1 Lot 73,343.28

Grade RCC Chamber with all requires

materials for Installation of Common

Header Valves. (3x3)

37 Construction of Necessary size M 20 1 Lot 73,343.28

Grade RCC Chamber with all requires

materials for Installation of Flow

38 CLAMP ON ULTRASONIC FLOW 0 Nos. 1,81,594.97 -

Supply, Installation, Testing and

Commissioning of Clamp on Ultrasonic

Flow Meter for Common Header as per

Detailed Tender Specification.

ELECTRICAL ITEMS

1 11 KV TWO POLE STRUCTUR. 0 Lot 1,21,869.63 -

'Supply Installation Testing

Commisioning of 11 KV Two Pole

2 HTMC PANEL 1 Lot 5,80,136.00

Supply Installation Testing

Commisioning of HTMC Panel.

3 DISTRIBUTION 2 Nos 6,27,625.11

11 /0.433 KV, 250 KVA ONAN,

Energy Efficiency Level 2 outdoor

type step-down transformer as per

tender Specifications, Data sheet, IS

1180 and relavent and as per given

description etc.

4 25 KVAR Fixed Capacitor For 50 kVAR 287.85

Distribution Transformer- 2 Nos

5 Foundation for Transformer 2 Set 69,361.91

6 Fire Protection Wall for Transformer 1 Set 68,486.90

7 HT PANEL 1 Nos. 10,00,710.02

SITC of Indoor type HT panel as per

tender Specifications, Data sheet, IS

and as per given description etc.

Comp6rasing of Vaccum cicuit

breaker for 1 No. incomer, 2 Nos. O/G

feeeders for Required KVA 11/0.433

kv districution transformers.

8 H.T. CABLE : 11 KV, 3c x 120 80 Mtr. 690.84

sq.mm XLPE (E) armoured cable

9 H.T. CABLE TERMINATION : 6 Nos. 8,880.93

Heat shrinkable type outdoor H.T.

cable end terminations suitable for

KV, 3c x 120 sq.mm. XLPE (E)

armoured cable.

10 H.T. CABLE TERMINATION : 4 Nos. 6,306.44

Heat shrinkable type Indoor H.T.

cable end terminations suitable for

KV, 3c x 120 sq.mm. XLPE (E)

armoured cable.

11 POWER MOTOR CONTROL 1 No. 13,73,196.00

SITC of LT panel as per tender

Specifications, Data sheet, IS and as

per given description etc.

12 JUNCTION BOX 4 No. 19,695.00

Supply, erection, testing &

commissioning of Junction Box for

Pumpset as per tender Specifications,

Data sheet, IS and as per given

description etc.

13 APFC PANEL 1 No. 1,89,950.70

50 KVAR Automatic Power Facor

Correction panel as per tender

Specifications, Data sheet, IS and as

per given description etc.

14 Supply, laying, connection, testing 250 Mtr 790.83

and commissioning of heavy duty,

KV XLPE AL conductor armordered

- Transformer to SPS PMCC Panel (2

Run For Each X'Mer) as per

Specification and IS 7098 Part I

Size : 3½ c x 240 sq.mm

15 Supply, laying, connection, testing 200 Mtr 301.99

and commissioning of heavy duty,

KV XLPE AL conductor armordered-

PMCC Panel To JB To Pump sets-1

(2 Run) as per Specification and IS

Size : 3 c x 95 sq.mm

16 Supply, laying, connection, testing 200 Mtr 145.44

and commissioning of heavy duty,

KV XLPE AL conductor armordered-

PMCC Panel To JB To Pump sets-2

(2 Run) as per Specification and IS

Size : 3 c x 35 sq.mm

17 Supply, laying, connection, testing 100 Mtr 166.65

and commissioning of heavy duty,

KV XLPE AL conductor armordered-

PMCC Panel To APFC Panel (2 Run)

as per Specification and IS 7098 Part

Size : 3½ c x 35 sq.mm

18 Supply, laying, connection, testing 100 Mtr 297.95

and commissioning of XLPE Copper

conductor armoured-for industrial

socket, External LDB, Instrument

Size : 4 c x 10 sq.mm.

19 Supply, laying, connection, testing 100 Mtr 86.86

and commissioning of XLPE Copper

conductor YWY- other work

Size : 3 c x 2.5 sq.mm.

20 Supply, laying, connection, testing 100 Mtr 142.41

and commissioning of XLPE Copper

conductor YWY- Industrial points

Size : 4 c x 4 sq.mm.

21 Supply, laying, connection, testing 400 Mtr 97.97

and commissioning of XLPE AL

conductor armoured-for Street Ligth

Size : 4 c x 10 sq.mm.

22 Supply, laying, connection, testing 400 Mtr 81.81

and commissioning of PVC CU

conductor Unarmoured-for Street

Size : 4 c x 2.5 sq.mm.

23 Supply, laying, connection, testing 250 Mtr 347.46

and commissioning of XLPE Copper

conductor YWY- Actuator panel and

other panel/work as per IS

Size : 16 c x 1.5 sq.mm.

24 Supply of FRLS PVC Insulated ISI 500 Mtr 42.47

Mark Cu Conductor Two Wire 1.5 Sq.

mm. for Electrification work of

Pumpin Station.

25 CABLE TERMINATION 8 Nos. 904.96

'Supply of connection, testing and

commissioning of Double

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets with necessary tools and

equipments as specified in

specifications and IS.

Termination Using Double

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered -

Transformer to SPS PMCC Panel (2

Run For Each X'Mer) as per

Specification and IS 7098 Part I

Size : 3½ c x 240 sq.mm

26 Termination Using Double 12 Nos. 429.25

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To JB To Pump sets-1 (2 Run)

as per Specification and IS 7098 Part

Size : 3 c x 95 sq.mm

27 Termination Using Double 12 Nos. 217.15

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To JB To Pump sets-2 (2 Run)

as per Specification and IS 7098 Part

Size : 3 c x 35 sq.mm

28 Termination Using Double 4 Nos. 221.19

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To APFC Panel (2 Run) as per

Specification and IS 7098 Part I

Size : 3½ c x 35 sq.mm

29 Termination Using Double 20 Nos. 153.52

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE Copper conductor

armoured-for industrial socket,

External LDB, Instrument panel

Size : 4 c x 10 sq.mm.

30 Termination Using Double 20 Nos. 89.89

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE/PVC Copper

conductor YWY- other work

Size : 4 c x 2.5 sq.mm.

31 Termination Using Double 20 Nos. 85.85

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE/PVC Copper

conductor YWY- other work

Size : 3 c x 2.5 sq.mm.

32 Termination Using Double 20 Nos. 132.31

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE Copper conductor

YWY- Industrial points

Size : 4 c x 4 sq.mm.

33 Termination Using Double 20 Nos. 129.28

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE AL conductor

armoured-for Street Ligth in SPS

Size : 4 c x 10 sq.mm.

34 Termination Using Double 18 Nos. 415.25

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE Copper conductor

YWY- Actuator panel and other

panel/work as per IS

Size : 16 c x 1.5 sq.mm.

35 Providing & laying. R.C.C. Hume 10 Mtr. 342.37

pipe for cable to be laid 90 cms. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original. (A) 300 mm

36 Providing & laying. R.C.C. Hume 10 Mtr. 262.77

pipe for cable to be laid 90 cms. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original. (B)150 mm

37 Making trench in soft soil of suitable 50 Rmt. 46.22

width of 90 cms deep for laying cable

or locating the fault all over the run

and backfilling the same and making

the surface as normal ground.

38 MAINS WIRING: 300 Rmt. 58.20

Mains with 1.1kV grade FRLS PVC

insulated ISI marked stranded copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ ceiling with 1.5 sq.

mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of

following size.

(A) with medium class Rigid PVC

pipe and accessories

(a) 2 wire 1.5 sq. mm

39 (b) 2 wire 2.5 sq. mm 100 Rmt. 77.03

40 (f) 4 wire 2.5 sq. mm 70 Rmt. 119.83

41 Point wiring for Light/ Bell with 2-1.5 25 Nos. 418.55

sq. mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1kV

grade FRLS PVC insulated

multistrand copper wires, in

following type of pipe to be erected

concealed in/ on surface on wall/

ceiling complete with 6A Modular

type switch/ bell push & accessories

and earth continuity of following

type, erected on PVC/ Metallic box,

single mounting base frame covered

with textured/ metallic front plate

modules erected on/ in wall/ ceiling as

per pipe erected, with necessary Lamp

holder/ ceiling rose/ H.D.Connector

(a) with medium class Rigid PVC

pipe and accessories, Cat. III

42 Point wiring for FAN with 2-1.5 5 Nos. 598.30

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked

KV Grade FRLS PVC insulated

multistrand copper wires, in below

type of pipe erected with 6A

Modular type switch and hum free

EME four or more step type electronic

fan regulator with separately mounted

and accessories with earth continuity

of following type erected on PVC /

Metallic/Wooden box, single

mounting base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per

pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories, Cat. III

43 Point wiring for Individual Plug with 10 Nos. 444.23

earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1kV grade FRLS

PVC insulated multistrand copper

wires, in following type of to be

erected concealed in/ on surface of

wall/ ceiling complete with Modular

type switch & 5 pin Plug erected on

PVC/ Metallic box covered with

appropriate front plate modules

erected on/ in wall/ ceiling as per pipe

erected with following type of

For 6A Plug with 2-1.5 sq.mm Cu.

Wire with medium class Rigid PVC

pipe and accessories, Cat. III

44 For 16 A Plug with 2-2.5 sq.mm Cu. 5 Nos. 668.48

Wire with medium class Rigid PVC

pipe and accessories, , Cat. III

45 For 16 A Plug with 2-4 sq.mm Cu. 5 Nos. 788.31

Wire with medium class Rigid PVC

pipe and accessories, , Cat. III

46 Point wiring for looped plug with 6A 5 Nos. 240.52

Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single

mounting base frame covered with

textured/ metallic front plate modules

erected on/ in wall/ ceiling with

following type accessories.

47 Point wiring for looped plug with 16A 5 Nos. 466.10

Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single

mounting base frame covered with

textured/ metallic front plate modules

erected on/ in wall/ ceiling with

following type accessories.

48 Point wiring for secondary light point 4 Nos. 120.69

with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

1.1kV grade FRLS PVC insulated

multistrand copper wires, in

following type of pipe to be erected

concealed in/ flushed on wall/ ceiling,

complete with earth continuity and

necessary connection with primary

light with accessories erected on

Metal/ PVC box covered with 3 mm

thick PC (Polycarbonate)/ Acrylic

sheet for open/ concealed wiring with

necessary Lamp holder/ ceiling rose/

H.D.Connector as directed. Note :-

Maximum up to 6 mtrs length, excess

will be considered as

Mains for Secondary Point.

(A) with medium class Rigid PVC

pipe and accessories

49 Point wiring for Two way controlled 2 Nos. 528.97

Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq. mm (green) both are of

ISI marked 1.1kV grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in/ flushed on wall/ ceiling

complete with 6A Modular type

switche sand following type of

accessories erected on PVC/ Metallic/

Woodenbox, single mounting base

frame covered with textured/

metallic/ white front plate module

serected on/ inwall/ ceiling as per pipe

erected. with necessary batten/ angle

holder or ceiling rose or

H.D.Connector as directed.

(A) with medium class Rigid PVC

pipe and accessories

50 One industrial metal clad switched 2 Nos. 593.22

socket outlet point controlled with

MCB with powder coated enclosure

& related accessories to complete the

(63 A x 3 pin 250 volt)

51 UPVC or better material made switch 2 Nos. 331.51

boards with required switches

Surface Mounted 12 Module Switch

52 UPVC or better material made switch 4 Nos. 330.51

boards with required switches

Surface Mounted 8 Module Switch

53 UPVC or better material made switch 8 Nos. 258.91

boards with required switches

Surface Mounted 4 Module Switch

54 UPVC or better material made switch 10 Nos. 156.78

boards with required switches

Surface Mounted 2 Module Switch

55 Supplying and erecting Approved 15 Nos. 588.88

make of LED Surface mounted

luminaire with rear reflector suitable

for office and laboratory applications.

(a) With 20 watt LED lamp

56 Supplying and erecting R&B 10 Nos. 415.25

approved make of LED Downlighter

surface mounted for Indoor

(a) With 10 watt LED lamp

57 Providing & erecting Approved make 4 Nos. 2,311.02

Ceiling Fan with double ball bearing

ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep High

speed complete having 3 blades

aluminium body and blade sets

having ornamental design shanks

,canopy & 30 cms. down rod erected

with 24/0.2, 3 core flexible wire with

58 Supplying & erecting single phase 2 No. 3,937.29

approved make industrial exhaust fan

suitable for medium duty ring

mounted low noise operation suitable

for medium duty having following

Dia size and maximum speed in RPM

[E] 450 mm Dia 1400 RPM Cat.II

59 Supplying and erecting approved 2 No. 2,139.83

make Pedestal Circulatory fan A.C.

230V. A.C. 50 Cy/s. 400 mm. sweep

and adjustable height complete with

guard & standard lead flexible wires

60 Supplying and erecting LED well 5 Nos. 1,576.00

glass with die cast aluminium housing

with polycarbonate cover robust

construction industrial type fitting

with IP-66 Protection. (40 watt)

61 Supplying and erecting LED street 8 Nos. 6,565.00

light IP 65. 90 - 120 watt

62 Providing and erecting heavy duty 6 Nos. 8,452.33

flood light Luminaire with High

Pressure die Cast Housing with IP

(b) With 150 watt LED lamp

63 Providing and erecting Sheet Steel 2 Nos. 2,338.41

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutrallink, earth bar

and DI Nrail, Conforms to IS 8623-1

& 3, IEC 61439 - 1 &3 without MCB

to house appropriate nos. of MCBs.

(The DBs should be used of same

company of MCB to be used) suitable

for three phase incoming and single

phase horizontaltype outgoing Per

phase isolation type (PPI)

sheet steel double door - 4 Way

64 Incomer: 63 A TPN MCB (C Curve) 1 Nos. 736.10

65 Outgoing: 16 A TPN MCB ( C Curve) 4 Nos. 594.87

66 Providing and erecting Sheet Steel 2 Nos. 1,491.03

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutrallink, earth bar

and DI Nrail, Conforms to IS 8623-1

& 3, IEC 61439 - 1 &3 without MCB

to house appropriate nos. of MCBs.

(The DBs should be used of same

company of MCB to be used) suitable

for single phase incoming and

horizontal single phase outgoing

sheet steel double door - 12 Way

67 Incomer: 32 A TPN MCB (C Curve) 1 No. 594.87

68 Outgoing: 10 A DP MCB (C Curve) 12 Nos. 299.58

69 Providing and erecting Sheet Steel 2 Nos. 628.25

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutrallink, earth bar

and DI Nrail, Conforms to IS 8623-1

& 3, IEC 61439 - 1 &3 without MCB

to house appropriate nos. of MCBs.

(The DBs should be used of same

company of MCB to be used) suitable

for single phase incoming and

horizontal single phase outgoing

sheet steel double door - 4 Way

70 Incomer: 63 A TPN MCB (C Curve) 1 Nos. 736.10

71 Supplying & erecting approved make 1 Nos. 1,942.97

RCCB + MCB (Electromagnetic type

only working on residual current

device having 10 KA short circuit

breaking capacity and 30m Amp.

Sensitivity & 30 mili sec. tripping

time conforming to IS 12640 testknob

facility trip free mechanism operating

for rated leakage at nominal ten volt,

complete erected including all

materials lugs screws etc. completed.

32A / 40A, 2 pole Single PhaseCat. II

72 Outgoing: 16 A DP MCB ( C Curve) 12 Nos. 299.58

73 Approved make Earth fault Relay 4 Nos. 4,686.23

suitable to mount with inter

connection to moulded case circuit

breaker having CT ratio & MCCB

rating as following along with shunt

trip 220V AC. with all internal

connections & complete erected in

M.S.housing.. (1) 15 A -100 A , CT

Ratio 1/100 or higher/as per SMC

74 Approved make RCCBs conforming 4 Nos. 1,968.64

to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase 240 V.

having characteristic of quick action

& tripping with all advance feature &

do not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps. DP

75 Approved make RCCBs conforming 4 Nos. 2,567.80

to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase 240 V.

having characteristic of quick action

& tripping with all advance feature &

do not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps. FP

76 Supplying & fixing box for housing 5 Nos. 273.90

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof bakelite shield two

earthing terminals for following type

of RCCB, ELCB, ELCB + MCB [a]

77 Supplying & fixing box for housing 5 Nos. 445.08

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof bakelite shield two

earthing terminals for following type

of RCCB, ELCB, ELCB + MCB [a]

78 Providing and fixing approved make 10 Nos. 6,873.14

Octagonal poles. Made from sheet

steel. The pole should be made as per

IS. and shall be coated with hot dip

galvanizing as per IS 2629/4759.

with required base plate suitable

suspend local wind speed to be

erected on existing foundation.

5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness

79 SETC of cement concrete foundation 8 Nos. 1,694.92

or for concrete filling in 1:3:6 ratio

with 20 to 25 mm stone metal duly

plastered with necessary curing for

pole muffing or any other purpose and

with necessary J Bolts. Size:500x500

80 Spike Type earthing for poles with 1 8 Nos. 635.59

meter long G.I. wire of 3 mm

81 Supply,Installation,Testing and 8 Nos. 795.16

Commissioning of Street Light pole

Single Arm Backet Size : 2 Mtr

82 Supply, Installation, Testing and 8 Nos. 683.03

Commissioning of Street Light pole

Single Arm Backet Size : 1.5 Mtr

83 Supply, Installation, Testing and 2 Nos. 406.86

Commissioning of coil type counter

poise earthing station for external

lighting pole and junction box. (2.5

mtr long 8 SWG, Cu wire)

84 Providing & laying approved make 50 70 Rmt. 61.63

mm dia Double walled corrugated

polyethylene(conforming to IS

14930 II )with necessary connecting

accessories of same material at

required depth for laying of cable.

below ground / road surface for

enclosing cable and back filling the

same to make ground as per original.

85 Supplying & erecting in earth pit of 2 Nos. 10,592.16

minimum bore dia. 225mm size ASH

or approved make Safe Earthing

Electrode consisting Pipe in- Pipe

Technology as per IS 3043-1987

made of corrosion free G.I.Pipes

having Outer pipe dia of 80 mm

having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection

terminal dia of 14 mm with constant

ohmic value surrounded by highly

conductive compound with high

charge dissipation suitable for

following type of applications.

(a) For Electrical Installation

covering Transformer Neutrals,

Lightning arrester Earthing,

Instrumentation (like PLC Panel,

SCADA)i.e. independent Earthing

located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags

86 Supplying & erecting funnel type 4 Nos. 2,311.02

earthing having earth plate of

following size burred in specifically

prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt

with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering &

bricks masonry block, C.I. Cover

complete as per para 7.3 of IS

with necessary length of double

Galvanised Iron / copper earth wire

No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to

the nearest switch gear with end

socket as per direction & duly tested

by earth tester confirming to IS with

following specification

(A) With 30 x 30 x 0.35 cms: C.I.

87 (C) with 60 x 60x 0.315 cms. Copper 4 Nos. 7,874.58

88 Supply & erectionr equired size 70 kg 794.31

Copper strip for earthing of H.T. OCB

/ ACB/ Transformer, LT panel board,

Motors etc. using copper clamp

89 Supply & erection required size HOT 100 kg 77.03

deep Galvanised iron strip for

earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors

etc. using proper clamp.

90 Supply & erection HOT deep 120 kg 77.03

Galvanised iron strip wire 12 SWG.

91 Supply & laying GI perforated type 150 Rmt 703.97

cable trays with returned edge/ flange,

fabricated from 2.0 mm thk sheet steel

in the standard length of 2.5 mtrs,

duly hot dipped galvanized after

fabrication as per IS 2629-1989 / IS

4759-1984 including accessories such

as coupler plates/ fish plates, bends,

tees, reducers, elbows, covers and

electro-galvanized hardware etc,

erected on existing support as per

specification and instruction of

engineer in charge.

(d) 450(W) x 35(H) x 2.0 mm Thick

95 Supply of necessary materials and 800 kg 98.98

M.S. fabrication work (For ISMB,

Square bar, flats, Chequered plates,

For C channels, angles etc for ladder

grills etc.) with oil paint as per details

96 4.5 Kg. Co2 type Portable fire 5 Nos. 6,590.68

extinguisher with necessary clamps,

supports and trolley.

97 Providing pair of rubber hand gloves 4 Nos. 213.98

suitable for working on 11kV/ 22kV

98 Supplying rubber matting of 6 mm 4 Sq. 983.58

thickness as per IS 5424 and of Mtr

required length and breadth with good

insulation property.

99 Supplying rubber matting of 12 mm 4 Sq. 3,081.36

thickness as per IS 5424 and of Mtr

required length and breadth with good

insulation property.

100 Warning signs (11 KV & 415 V) 2 Nos. 448.64

101 Supplying stand first AID box with 2 No 299.58

antiseptic cream, medicine for use on

wounds due burn, crepe bandage,

gauge bandage, medicated ready to

use bandage (Band-aid) adhesive tape

for medicinal user, Scissors, anti-

septic solution (savlon or similar) etc.

(All above contents shall be of

standard makes)

102 Providing printed instruction chart 2 Sets 128.39

both in English and Gujarati and duly

framed with front glasses for

treatment of person suffering from

Electric shock.

103 Supplying and erecting floor 8 Nos. 1,155.51

mounting stand for keeping four nos.

of FIRE buckets comprising 1500 mm

in length, 900 mm height frame made

out of 30mm X 30 mm X 4 mm angle

iron with cross supports for legs,

welded with 4 hooks and duly painted

with one coat of red lead and two

coats of approved enamelled silver

104 SETC of 10 W LED lamp operated 4 Nos. 1,251.40

self contained emergency light with

dry type maintenance free battery.

105 LIASONING CHARGES 1 Job 20,690.85

Liasoning fees for preparing

necessary documents and drawings

for getting N.O.C from supply co and

Electrical Inspector for charging the

installation.( All statutory fees will be

106 LIASONING CHARGES 1 Job 20,690.85

Liasoning fees for preparing

necessary documents and drawings

for getting N.O.C from factory

Inspector for factory licence of

premises. (All statutory fees will be

107 Cup Board 1 Nos. 7,252.21

108 Table 1 Nos. 4,665.85

109 Heavy Duty Office Chair 2 Nos. 3,113.76

110 Safety Helmet 3 Nos. 129.45

111 Safety Belt 3 Nos. 796.59

112 Safety Shoes Pair 3 Nos. 269.18

113 AUTOMATION 1 Lot 1,92,942.44

PLC Based Auto-Operation system of

Pump sets along with 1 KVA UPS

and battery back upas directed by

Engineer in Charge at sewage

Pumping Station along with 1 KVA

UPS and battery back up

114 Supply of Desktop PC with UPS and 1 No. 77,600.96

other accessories as per detailed

technical specifications

115 Supply, Installation, Testing and 1 No. 3,630.90

Commissioning of Voltage Stabilizer

and other accessories as per Tender

116 Development of graphics of SPS & 1 Job 26,897.83

connecting automation system of SPS

117 CCTV CAMERA SYSTEM 1 Job. 67,196.63

Supply, Installation, Testing and

Commissioning of 7 Nos. CCTV

camera System for Sewage Pumping

118 Supply of SCADA runtime software 1 No. 98,540.44

with lifetime license (for 15 displays)

119 Supply, Installation of Biometric 1 No. 15,296.61

Attendance System as per detailed

Tender Specifications.

120 INFORMATION BOARD AT 2 Lot 3,672.68

PUMPING STATION

Supply of Pumping Station

information board with printed eco

vinyl sheet with wooden frame, size

TOTAL RATE CAPITAL WORK

SCHEDULE-B2 OPERATION & MAINTENANCE WORK

DESCRIPTION QTY UNIT RATE TOTAL RATE

All in all Operation & Maintenance

Cost (Manpower, Fixed Cost,

Machineries Maintenance & Variable

1 Cost) for Normal Operational Period 60 Month 1,67,525.02

for Three Shift of ICHHAPORE SPS as

per detailed specification mentioned

Painting work as instructed by Engineer

2 in Charge for ICHHAPORE SPS as per 1 Job 1,00,000.00

detail specifications & scope of work.

TOTAL RATE OF OPERATION & MAINTENANCE WORK

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation