Construction of Dhyana Mandiram of Sri Narayana Swamy Temple, Mittapalem, Kovilampadu(V) C.S.Puram(M), Prakasam District

Construction of Dhyana Mandiram of Sri Narayana Swamy Temple at Mittapalem,Kovilampadu(V) C.S.Puram(Mandal), Prakasam District. Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering :

for column Footings

for plinth beam

for 5" Thick roof slab

for 2'-6" wide kodangai

Supplying & fixing in position the following steel bars for all RCC works including cost and conveyance of steel to work site and including straightening, cutting, bending, hooking, lapping or welding where required and placing in position, tying with binding wire of cost of binding wire, anchoring to the adjoining members wherever necessary approved quality and gauge including etc., complete as per design specifications and directions.

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Ornamental Brick Masonry in C.M(1:5) mix using II nd class bricks well burnt from any kiln, inclusive of brick bots, and madras terrace bricks, including cost & conveyance of all materials, labour charges, scaffolding charges, and curing etc., complete complying of standard specifications and as directed during execution of work for one Cu.m.

Plastering with CM (1:3) 12 mm thick using the best river sand, including cost & conveyance of all materials, labour charges and curing etc., complete complying with standard specifications and directed during execution of work. for 10 Sq.m

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Ornamental plastering 1" to 1 1/2" thick with base plastering 1/2" to 3/4" in C.M(1:3) and top finishing 1/2" thick with C.M(1:2) to bring required ornamentation including cost and conveyance of all materials,labour charges for curing etc.,complete for finished item of work in site for external surface as per approved drawings and directed during execution including preparation and fixing of precast pillars where ever necessary (Special Class)

Supplying and fixing of best teak wood ornamental door shutters with two leaves as per standard temple design including cost of frame and flanks and preparation charges, fixing of shutters in position with locking arrangements etc., complete.

Providing and fixing factory made uPVC white colour sliding glazed window uptoi .50m inheight dimension comprising of uPVC multi chambered frame with in-b jilt roller trackandsash extruded profiles duly reinforced with 1,600.2mm thick galvanized mild steel sectionmade from roll forming process of required length (shape & size accorcing touPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extrudedinter locks, EPDM gasket,wool pile.zin calloy(white powder coated) touch locks withhook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.Ifasteners 100x8mm size for fixing frame to finished wall and necessary stainless s:eelscrewsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners,including drilling of holes forfixing hardware's and drainage of water etc. After fixing framethe gap between frame and adjacent finished walls shall be filled with weather proof siliconsealent over backer rod of required size and of approved quality, all complete as perapproved drawing & direction of Engineer -in -Charge inclusive of cost of Single/doubleglasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash exrudedprofiles minus 5% tolerance in dimension i.e. in depth & width of profile shall beacceptable.Variation in profile dimension in higher side shall be accepted but no extrapayment on this account shall be made. Three track three panels sliding window with flyproof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series)frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 0.2 mn and singleglazing bead of appropriate dimension (Area of window upto1.75 sqm).

Painting with best Emulstion paint two coats over primary coat including cost ardconviyance of cement and all other materials to work spot labour charges curingetc., complete.