PROVISION OF FOOT PATH AND ALLIED WORKS AT CERTAIN LOCATIONS AT SMA RAMESHWARAM AND PROVISION OF DRAIN COVERS AT VARIOUS LOCATIONS AT INS DRONACHARYA AND SMA RAMESWARAM UNDER GE FORT KOCHI.

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor etc, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for sand as in cushioning, for floors, under paver blocks etc including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with gray cement no pigment conformed to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Material and labour for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed agg) in foundation of drain filling and mass concrete complete all as specified and directed.

M&L for pre-cast cement concrete block masonry , 1:2:4 Type B-1 (using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in coping and the like including weathering slightly rounded/chamfred angle with including necessary use and waste of form work for fair faces of concrete complete all as specified and directed .

Returning filling in, including spreading levelling, watering & well ramming in layers n exc 25 CM with any type of soil complete all as specified and directed.

RRemoving excavated material (Soil) to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above starting point complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed

M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms moulds mitred/stopped ends etc complete all as specified and directed

M&L for providing precast cement concrete for manhole/ drain cover slabs and similar work type B-1 (1:2:4) using 20mm graded aggregate set in cement mortar 1:4 complete all as specified and directed

Use and waste of f ormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L TMT bars 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality confirming to Fe 410-5 or Fe 40-0 complete all as specified and directed

M&L for providing precast cement concrete, type C-1 (1:3:6) using 20mm graded aggregate as in coping complete all as specified and directed

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

M&L for framed work such as grills, gratings, etc with end of bar houldered and or riveted, or forged into spikes;framed guard bars;barred iron doors;ladders;framed balusters;walk ways;railings;frame work of water tanks and similar works conforming to Fe 290.Gde-E-165 complete all as specified and directed

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described applying with two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as directed by Engineer-in-Charge.