Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for Newly Sunk Tube Well in connection to Araji Madhupur ground water based water supply scheme under Dist-Murshidabad under MEDB,

Amount

PART A Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor as per having following specification as per IS 8034, and IS9283 respely BEE 2 star rated with standard MOC DISCHARGE : 32 cubic mtr./Hr. HEAD : 41 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery. Make PHED approved

Supply delivery at site of 1.1 KV 4 Sq. mm. 3 core, water proof flat copper cable as per IS 694 specification N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 KV 4 Sq. mm. 3 core,copper AR cable as per IS7098 specification.

Supply delivery floore mounted canopy type Kiosk at site with 100 Amps.6 nos copper Bus-Bar as per direction of EIC

Supply delivery of S/D starter submersible pump rating ,3Phase,415V,50HZ ,relay range 9-14 Amp, with wide band coil. Make L&T MU-G10/Equivalent phed approved

Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per direction of EIC

Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and a as per direction of EIC

Supply and delivery at site of 80mm dia CI top & bottom adopter and as per specification as per direction of EIC

Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90⁰ bend-2 nos. CI flanged tee- 1 no., CI flanged short piece -2nos ,flange etc. and as per specification of as per direction of EIC

Supply and delivery at site of Heavy type 250 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry and as per specification .

Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.

PART-B Installation of all items as mentioned in Sl.No.1 to 11 (Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, , starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with specification and upto entire satisfaction of EIC.

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per specifiaction & direction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of as per direction and to the entire satisfaction of E.I.C.

Add GST @ 18%

Add CESS @ 1%

JOGMAYA ENGINEERING

SURAKSHA