Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 CrAccepted-AOC KUNNAPPILLIL BUILDING SOUTH MARADY P O MUVATTUPUZHA 686673 | MUVATTUPUZHA | ERNAKULAM | KERALA | 686673 | ₹1.7 Cr | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹1.7 Cr+₹1.2 L (0.71%)Rejected-AOC | ₹1.7 Cr+₹1.2 L (0.71%) | L2 | Rejected-AOC L2 Bidder |
| 3 | L3₹3.5 Cr+₹1.8 Cr (106.2%)Rejected-Finance | ₹3.5 Cr+₹1.8 Cr (106.2%) | L3 | Rejected-Finance L3 Bidder |
| Sl No | Description | Qty | Unit | Ashly Furnishing Co Pvt Ltd L1 | A one furniture L2 | ABHIMAN INTERIORS & TURNKEY CONTRACTS PRIVATE LIMITED L3 |
|---|---|---|---|---|---|---|
| 1.00Furniture | ||||||
| 1.01 | Managers table with drawer treated with hardwood: size 1525x760x760 mm | 34 | no | 21,200 ₹7,20,800 | 13,100 ₹4,45,400 Lowest | 19,750 ₹6,71,500 |
| 1.02 | Single sided Workstation Table: Supplying, fabricating and installing Single sided Workstation Table of size 600mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The front panel shall be 100 mm from the outer edge of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/Cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 195 | metre | 10,270 ₹20,02,650 | 13,950 ₹27,20,250 | 8,250 ₹16,08,750 Lowest |
| 1.03 | Pedestal Unit with casters: Supplying, fabricating and installing Pedestal Unit of size 400 mm x 450mm x 700mm with following specification. 1.Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. Drawers: 3 nos with soft close sliders,D handle and multipurpose lock. The bottom panel of the drawers shall be made of 9mm thick IS 710 BWP marine plywood and carcase for the drawers shall be made of 18mm IS 710 BWP marine plywood. 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The pedestal should be assembled using a knockdown fittings system. The casters are installed at the four corners for easy movement. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make | 110 | no | 8,500 ₹9,35,000 | 5,110 ₹5,62,100 Lowest | 7,250 ₹7,97,500 |
| 1.04 | Floor mounting storage unit: Supplying, fabricating and installing storage units of varying dimensions, length ranging from 800mm to 2400mm, width 450mm, height ranging from 900 mm to 2100mm with following specification. 1.Panel and door shutter: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hardware includes 90 degree soft close hinges,multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings,colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 280.59 | sqm | 13,800 ₹38,72,142 Lowest | 15,250 ₹42,78,997.5 | 15,600 ₹43,77,204 |
| 1.05 | Overhead storage unit: Supplying, fabricating and installing wall mounting storage units of varying dimensions, depth 400 mm, height ranging from 600 mm to 750 mm with following specification. 1.Panel:- 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be 12 mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hard ware includes 90 degree soft close hinges,multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engr in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make. | 29.35 | sqm | 14,800 ₹4,34,350.4 Lowest | 15,350 ₹4,50,491.8 | 15,070 ₹4,42,274.36 |
| 1.06 | Open storage unit with fixed shelves: Supplying and installing open storage units with fixed shelves of length ranging from 800 mm to 2400 mm, width 450 mm and height 900 mm to 2100mm with following specification. 1. Panel and shelves: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1mm lamination. 4. Horizontal spacing between shelves shall be 350 mm to 450 mm. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 80.48 | sqm | 11,400 ₹9,17,506.2 Lowest | 13,680 ₹11,01,007.44 | 13,650 ₹10,98,592.95 |
| 1.07 | Dining Table: Supplying and installing Dining Table of size 1500 mm x 750 mm x 750 mm with following specification. 1.Top Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding . 3. Table frame: shall be fabricated with 50mm x 50mm x 2mm thick MS tube frame,supported by legs of 50mm x 50mm x 2mm thick MS tubes, tie member of size 40mm x 80mm x 2mm thick MS tube and all tubular members shall be powder coated with a minimum thickness of 60 microns, and finished as approved. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 18 | no | 16,000 ₹2,88,000 | 10,300 ₹1,85,400 | 9,500 ₹1,71,000 Lowest |
| 1.08 | Supplying and placing of Bystander cot: Size: 180L x 60W x 46H cms. Available with mattress Framework rectangular/square M.S. Tube Finish Epoxy Powder Coated Attendant Bed cum chair Specification – MS Tubular frame work mounted on PVC stumps. Pull-Out Design for Easy transforming Recliner into Bed. | 210 | no | 12,150 ₹25,51,500 | 5,990 ₹12,57,900 Lowest | 19,500 ₹40,95,000 |
| 1.09 | Curtain cloth: Providing and installation of hospital curtains with the following specifications. The curtians shall be Premium Quality Fabric Curtains:Stain Retardant Fabric with matching color 450 mm oval net on top. Complete with SS grommets. | 5,594.16 | sqm | 413 ₹23,10,388.08 Lowest | 460 ₹25,73,313.6 | 3,450 ₹1,92,99,852 |
Tender Value
₹1.7 Cr
EMD Value
₹50,000
Closing Date
4 Jun 2026, 3:00 pmClosed
Managing Director, INKEL Limited
1st Floor, Ajiyal Complex, Post Office Road, Kakkanad, Cochin - 682030
Supply of Furniture including installation
2026_INKEL_852299_1
NIT/INKEL/KIIFB/2026-27/174 dated 21/05/2026
Open Tender
Miscellaneous Works
Item Rate
90 days
District Hospital, Mavelikkara
As per Tender Document
12 documents required · 12 mandatory
₹5,900
₹50,000
19 Sept 2026
21 May 2026
6 Jun 2026
22 May 2026
4 Jun 2026
28 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Furniture | |||||
| 1.01 | Managers table with drawer treated with hardwood: size 1525x760x760 mm | - | no | 1.25 | - |
| 1.02 | Single sided Workstation Table: Supplying, fabricating and installing Single sided Workstation Table of size 600mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The front panel shall be 100 mm from the outer edge of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/Cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | - | metre | - | - |
| 1.03 | Pedestal Unit with casters: Supplying, fabricating and installing Pedestal Unit of size 400 mm x 450mm x 700mm with following specification. 1.Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. Drawers: 3 nos with soft close sliders,D handle and multipurpose lock. The bottom panel of the drawers shall be made of 9mm thick IS 710 BWP marine plywood and carcase for the drawers shall be made of 18mm IS 710 BWP marine plywood. 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The pedestal should be assembled using a knockdown fittings system. The casters are installed at the four corners for easy movement. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make | - | no | - | - |
| 1.04 | Floor mounting storage unit: Supplying, fabricating and installing storage units of varying dimensions, length ranging from 800mm to 2400mm, width 450mm, height ranging from 900 mm to 2100mm with following specification. 1.Panel and door shutter: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hardware includes 90 degree soft close hinges,multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings,colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 1 | sqm | - | - |
| 1.05 | Overhead storage unit: Supplying, fabricating and installing wall mounting storage units of varying dimensions, depth 400 mm, height ranging from 600 mm to 750 mm with following specification. 1.Panel:- 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be 12 mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hard ware includes 90 degree soft close hinges,multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engr in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make. | 1 | sqm | - | - |
| 1.06 | Open storage unit with fixed shelves: Supplying and installing open storage units with fixed shelves of length ranging from 800 mm to 2400 mm, width 450 mm and height 900 mm to 2100mm with following specification. 1. Panel and shelves: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1mm lamination. 4. Horizontal spacing between shelves shall be 350 mm to 450 mm. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 0.2 | sqm | - | - |
| 1.07 | Dining Table: Supplying and installing Dining Table of size 1500 mm x 750 mm x 750 mm with following specification. 1.Top Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding . 3. Table frame: shall be fabricated with 50mm x 50mm x 2mm thick MS tube frame,supported by legs of 50mm x 50mm x 2mm thick MS tubes, tie member of size 40mm x 80mm x 2mm thick MS tube and all tubular members shall be powder coated with a minimum thickness of 60 microns, and finished as approved. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | - | no | - | - |
| 1.08 | Supplying and placing of Bystander cot: Size: 180L x 60W x 46H cms. Available with mattress Framework rectangular/square M.S. Tube Finish Epoxy Powder Coated Attendant Bed cum chair Specification – MS Tubular frame work mounted on PVC stumps. Pull-Out Design for Easy transforming Recliner into Bed. | - | no | - | - |
| 1.09 | Curtain cloth: Providing and installation of hospital curtains with the following specifications. The curtians shall be Premium Quality Fabric Curtains:Stain Retardant Fabric with matching color 450 mm oval net on top. Complete with SS grommets. | 1 | sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Tenderdoc.pdf
Tender Documents • 0.91 MB
Dwng.pdf
Tender Documents • 17.77 MB
BOQ_1440126.xls
BOQ • 0.34 MB
Corrigendum1.pdf
PDF • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .