AMRUT Projects 2016-17 - Supply, Erection, Testing and commissioning of Pumpsets having a discharge of 126 lps against a head of 25 m and allied works at 15 LL

Supply and erection of CF pump set with the following specification

Pump Supply,erection,testing and commissioning of KWA pre qualified, reputed make centrifugal pumpsets with Bronze/SS impeller.SS Shaft and CI pump casing with suitable type base plate with coupling ,coupling guard, foundation bolts and nuts etc complete suitable for coupling the pump and motor above the base plate etc complete including providing suitable concrete foundation including cost of cement ,sand and metal etc complete The duty condition is as follows: Discharge: 126 lps Total head-25m Suction Head 3.25 m Length of suction pipe 10 m Speed upto 1500 RPM

Motor Supply,erection,testing and commissioning of of KWA pre qualified, reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working three face 50HZ AC supply,working voltage 415V The motor shall confirm to EEF1 /IS 325 including providing suitable concrete foundation including cost of cement ,sand and metal etc complete. flexible coupling shall be used for couplings of pumps and motors

Cabling work Supply, laying, testing and commissioning of 1.1 KV grade 3Cx70sq.mm Aluminium conductor armoured cables for the above pump set from panel board to starter and from starter to motor.considering energy conservation.

Earthing Supply of all material and providing suitable earthing by 600x600x10mm CI plate buried in ground and giving double earthing to motor,starter,panel board etc. As per IE standards

Capacitor Supply, erection,testing and commissioning of capacitorconforming to IS 2834 suitable for above motor for working with unity power factor

Valves Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating.Fitting of valves shall include proper RCC support especially for Non return valves.In case of positive suction pump set sluice valve should be in suction as well as delivery sides for easy repair works.Pressure guage on both suction and delivery side.

Suction and delivery pipe connections Supply and fitting of suitable size best quality GI/MS pipe of thichness not less than 8mm for a total length of 10m. Suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flangers,nut and bolts IR sheet ect. Complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main .If the dia of suction pipe is above 80mm CI pipes & special shall be provided.

Electrification and allied works -Fabrication, suppLy, erection, testing and commissioning of wall mountiNg type metering panel made out of 16 gauge CR sheet and power coated for receive KSEB's supply such as provision for fixing 1 No. LT TOD meter for power, 1 No. single phase meter for light, 3 nos 200A HRC fuse base with HRC fuses and neutral link as cut out for power, 1 no. 20A HRC fuse base with HRC fuse and neutral link for light, sutiable CT box and ceiling provision for KWH meter and CT box doors, 200 A , 50 KA 3 pole MCB with 0-300 mA ELR module, shunt trip release and extended rotary handle complete with labour

Supply and laying of 3 1/2 x 95 sq.mm aluminium armoured cable from KSEB's meter board to MSB through wall / column / built up cable trench / floor etc. complete with labour.

Supply and laying of 3 1/2 x 50 sq.mm aluminium armoured cable from MSB to local isolator near by motor starter through wall / column / built up cable trench / floor etc. complete with labour.

Supply of materials, glanding and termination of following aluminium armoured cable using compression type plated cable gland, aluminium crimping sockets and it's accessories complete with labour.- 3 1/2 x 95 sq.mm aluminium armoured cable

Supply of materials, glanding and termination of following aluminium armoured cable using compression type plated cable gland, aluminium crimping sockets and it's accessories complete with labour.-3 1/2 x 50 sq.mm aluminium armoured cable.

Supply and provide 50mm dia. Pipe earth electrode as per IS 3043 complete with materials and labour.

Supply and laying of 25 x 3mm copper strip to earth KSEB's meter board, MSB and connect pipe earth electrode through wall / column / builtup cable trench /floor complete

Supply, errection, testing and commissioning of reputed make 12 way double door flush moutning type single phase MCB LDB with 25 A, 30mA, 2 pole RCCB as incomer, 5 nos 10A and 5 nos 6A SPMCB's as out going complete with labour.

Supply and laying of 2 x 6 sq.mm aluminium armoured cable through wall / column / floor from KSEB's meter board to LDB complete with end termination at both ends.

Supply of materals and wiring of light /fan points using 1 sq.mm 1.1 KV grade PVC insualted flexiable copper wire for phase, neutral and earth through 20mm ISI PVC conduit and its accessoreis, 6A cotnrol switch in metalic /PVC switch box etc. complete with labour

Supply, fixing and connect 6A 3 pin plug socket and control switch in same light control box complete with labour.

Supply of materialss and wiring 6A 3 pin plug socket and control switch in separate metal /PVC box using 1.5 sq.mm 1.1 KV grade PVC insulated flexible copper wire for phase, neutral and earth through 20mm ISI PVC conduit and its accessories complete with labour

Same as above but 15A 3 pin plug socket and control switch in separae box using 2.5 sq.mm 1.1 KV grade PVC insulated copper wire for phase, neutral and earth.

Supply of materials and wiring circutis usig 1.5 sq.mm 1.1 KV grade PVC insulated flexible copper wire for phase, neutral and earth through 20mm ISI PVC conduit and it's accessories complete with labour.

Supply and errection of reputed make 4 feet LED tube light fitting with tube on ceiling /wall and connect the same with light points with 15 sq.mm PVC insulated flexible copper wire complete with labour.

Supply and fixing angled button holder with LED (12 Watts) lamp and connect light point complete with labour.

Supply and fixing reputed make 20 Watts out door LED street light fitting and connect the same with light points complete with labour.

Supply and fixing reputed make 1400mm sweep 3 blade with plug type electronic stage regulator and connect the same with fan point complete with labour.

Supply and fixing reputed make 300mm sweep exhaust fan and connect the same with fan points complete with labour

Charges for LT TOD meter, TTB, CTs, light meter etc.

Supply and laying of 2 mtr x 1 mtr size 6 mm thick electrical grade rubber mat.

Charges to prepare new drawings and connected pappers to submit to KSEB to obtain power allowcation and energistation excluding statutory feeses and deposits.

National Electrical Works

NATHIPATHI ENGINEERS

Baby NV