Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance VILLAGE BHARAPUR P O DHAULAKUAN TEHSIL PAONTA SAHIB DISTRICT SIRMOUR H P | Admitted-Finance |
| 2 | Admitted-Finance DHALIWAL | TARN TARAN | PUNJAB | 143107 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Not Admitted-Fee/PreQual/Technical CONTRACTOR WARD NO 10 DEVINAGAR PAONTA SAHIB DISTRICT SIRMOUR H P | SIRMAUR | HIMACHAL PRADESH | 173001 | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹89,000
Closing Date
11 Dec 2020, 11:00 amClosed
Executive Engineer
JSV Division Paonta Sahib
Balance work of laying and jointing of CI DI Pipes and construction of Mainhole in Zone III
2020_HPIPH_42967_1
PNY-SMR02-720 No 11186-285
Open Tender
Civil Works
Item Rate
180 days
Paonta Sahib
Please refer to tender documents
6 documents required · 6 mandatory
₹800
EE JSV Paonta Sahib
₹89,000
Yes
15 Dec 2020
5 Dec 2020
11 Dec 2020
5 Dec 2020
11 Dec 2020
5 Dec 2020
5 Dec 2020 - 11 Dec 2020
Amount
Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock upto all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in-charge
Demolition below G.L. upto 1.50 mtrs. depth and disposal of Un-serviceable materials within all leads and lifts un-reinforcement cement concrete and black top surface of roads, gully etc. upto 15 cm thickness including all leads lifts and as per direction of Engineer in-charge.
Laying ,Jointing & testing in trenches Centrifugal Cast Ductile iron Tyton Pressure Pipe confirming BIS8329-2000 C-Series K7 inside Cement Mortar lined suitable for push on joints for sewer line including rubber gasket SBR confirming to ISS-2810-1987, cutting of pipe chamfering where required ( earth work in trenches to be measured and paid for seperately) including all leads lifts and carriage of material at site and as per direction of the Engineer-incharge.(L.Rate)
i)450mm dia
ii)350mm dia
Providing and laying cement concrete 1:4:8 ( 1 cement:4 sand:8 graded stone agg. 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including all leads lifts and carriage of material and as per direction of Engineer-in-Charge.
Ist. Class brick work using common burnt clay building bricks in foundation & Plinth in Cement Mortar 1:4(1cement:4sand) in all leads lifts and carriage of material etc. as per direction of Engineer-in-chrge.
15mm thick cement plaster in single coat on the fair side of bricks/stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1:3(1cement:3sand) and curing complete including all leads lifts and carriage of materials at site as per direction of Engineer-incharge.
Providing and laying cement concrete 1:2:4(1cement:2app.sand: 4 app. graded stone agg. 20mm nominal size )and curing complete excluding cost of form work in suspended floors etc. including carriage of material at site and as per direction of the Engineer-in-charge.
Providing form work with steel sheets 3.15mm thick welded with angle iron 30x30x5 mm so as to give rough finish including centring shuttering structing and propping etc. with wooden bettens & Ballies, height or propping & centering below supporting floor to ceiling not exceeding 4 mtr.and removal of the same for insitu RCC work and PCC work including all leads lifts and carriage of material at site and as per direction of Engineer-in-charge..
a)Flat surfaces such as sofits and suspended floors, roofs landing and the like floors etc. up to 200 mm in thickness.
Providing Mild/Tor steel reinforcement for RCC work including bending binding & placing in position i/c all leads lifts and carriage of material and as per direction of the Engineer-in-charge.
Providing & fixing precast RCC (SFRC) Manhole covefr with collar/ frame of medium duty with clear opening below metion dia
Sohal Pal Singh
RAMNIK THAKUR
Shamshad Ali Contractor
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .