Provision of Borewell with Pumping Machinery at Ranchodray mandir area near by Varashi Bridge at Kapadwanj under MLA Grant Year 2025-26

NAME OF WORK: - PROVISION OF BOREWELL WITH PUMPING MACHINERY AT

RANCHOD RAY MANDIR AREA NEAR BY VARASHI BRIDGE AT KAPADWANJ

UNDER MLA GRANT, YEAR 2025-26

Total Volumes: 4 (Four)

Date of Issue: -……………….

Receipt No. of Tender Processing fee paid Amount: Rs. 900/-

(Nine Hundred Rupees only)

NAGAR SEVA SADAN

NAGAR SEVA SADAN

NAME OF WORK: - PROVISION OF BOREWELL WITH PUMPING MACHINERY AT

RANCHOD RAY MANDIR AREA NEAR BY VARASHI BRIDGE AT KAPADWANJ

UNDER MLA GRANT, YEAR 2025-26

MILESTONE DATES

Online Downloading & Online

Submission of Tender:

Pre- Bid Conference Date: 24-07-2026 at 12:00 Hrs.

Due Date Online Tender Bidding: 05-08-2026 at 18:00 Hrs.

Physical Submission of Tender All tender documents, tender fees and EMD scan copies will

Fee, EMD and other Documents: be submitted to the online electronic format only, the

original tender fee, EMD and the signature and stamped

documents in the hard copy will be sent to the office of

Kapadvanj Nagar Seva Sadan by R.P.A.D./Speed Post/

Courier on Dated: - 12-08-2026 Till 18:00 Hrs.

Bid Opening Date: 14-08-2026 at 11.00 Hrs.

NAGAR SEVA SADAN

Schedule Description Total Amount

Schedule Description Total Amount

Provision of Borewell with Pumping Machinery at Ranchod ray

mandir area near by Varashi Bridge at Kapadwanj

Total Tender Amount = ₹

Name of Work: Provision of Borewell with Pumping Machinery at Ranchod ray mandir

area near by Varashi Bridge at Kapadwanj

Sr. Total Amount

Description Quantity per

No Rate (in Rs.)

1.) Drilling of pilot bore hole of size 250 / 300 mm by Mini

DR rig including lowering of pipe assembly, gravel

packing, clay packing and development of bore hole by

2.) Providing 200 mm Dia UPVC pipes of ISI marked (IS

3.) Manufacture, supply and delivery of Cage type

trapezoidal shape ("V"') wire wound low carbon,

galvanized screen pipe and stainless-steel screen pipes, 50.00 1666.00 Rmt ₹

confirming to IS: 8110 200 mm dia. LIGHT (1.00 mm

4.) Providing clamp of size 450 mm x 65 mm x 10 mm made

from MS plate suitable for 150 mm Dia UPVC pipes

along with bolts & nuts of standard make & required 1.00 687.07 No. ₹

5.) Providing UPVC End (Bottom) Cap Suitable to 200mm

Dia UPVC pipe. 1.00 822.05 No. ₹

6.) Providing well sorted gravel at site of work of size

ranging from 4 mm to 6 mm size. 0.56 2029.00 Rmt ₹

7.) Carrying out development of bore by air compressor of

600 CFM / 150 PSI capacity till sand free discharge is 1.00 3893.00 Hr. ₹

8.) Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply

& 2800 RPM as per IS 9079 at departmental stores with

following MOC: Casing: CI-FG260, Impeller: Bronze & 1.00 16320.00 No. ₹

Shaft: SS:410 I. e. 285 LPM @ 24 mtr. Head & 5 HP.

9.) DOL / Star Delta starter suitable for local & remote

pump control application consisting of MPCB, overload

relay and contactors as per Type II coordination

including digital voltmeter, analogue ammeter with 1.00 6924.00 No. ₹

selector switch, run hour meter, required protective

relays & control accessories. D. O. L. up to 5 HP

10.) Supply of 1 x 3 x 2.5 mm2 PVC insulated round

submersible cable as per detailed technical 65.00 81.00 Rmt ₹

specifications conforming to IS 694, IEC 60227 /

11.) Providing and supplying in standard length ISI mark

high density Polyethylene H.D.P.E. Pipes suitable for

potable water as per IS specification no. 4984/1995

including all local and central taxes, transportation, 75.00 81.00 Rmt ₹

freight charges, octroi, inspection charges, loading,

unloading, conveyance to the dept. stores etc.

comp.10.0 Kg/cm2 (50mm Dia)

Sr. Total Amount

Description Quantity per

No Rate (in Rs.)

12.) Lowering of single-phase submersible pump set

complete with required length of HDPE pipe & cable in

bore well and fitting of control panel board including

wiring work and satisfactory testing as per instruction 1.00 700.00 Job ₹

of Engineer-in-charge including carting of material to

site. up to 90 mtr.

13.) Lowering, Laying and jointing HDPE Pipe and specials

of following class and diameter (by butt fusion welding

method) including cost of conveyance from stores to

site of works at all level including cost of labour, 75.00 4.60 Rmt ₹

material, giving satisfactory hydraulic testing etc.

complete. (50 mm Dia)

Total Amount = ₹

Total Amount = ₹

Total Net Amount = ₹