Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance PLOT NO 234 BBN ENERGY SYSTEMS PRIVATE LIMITED 234 SECTOR 37 PHASE VI UDYOG VIHAR GURGAON GURGAON HARYANA 122001 | GURUGRAM | HARYANA | 122001 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Rejected-Technical | Rejected-Technical REJECT |
| 5 | Rejected-Technical 106 AIR FORCE CENTRAL SCHOOL SCHEME JODHPUR RAJASTHAN 342001 UDYAM RJ 22 0106649 | JODHPUR | RAJASTHAN | 342001 | Rejected-Technical REJECT |
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
30 Dec 2019, 3:00 pmClosed
Executive Engineer (E)
All India Institute of Medical Sciences, Jodhpur
Tender For Supply Installation Testing and Commissioning of LT Panel and Cables for newly constructed Modular Operation Theater block at AIIMS Jodhpur
2019_AIIMS_528338_1
AIIMS-JDH/EE/ELECT/2019-20/06
Open Tender
Miscellaneous Works
Works
30 days
All India Institute of Medical Sciences
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹58,000
Yes
All India Institute of Medical Sciences, Jodhpur
10 Feb 2020
18 Dec 2019
31 Dec 2019
18 Dec 2019
30 Dec 2019
18 Dec 2019
24 Dec 2019
Amount
Providing & Laying XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium armoured conductor cable of IS:1554 P-I / IS :7098 P - I in ground as per IS:1255 including excavation of 30cm x 75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. Make: Havell's / Poycab / RRKable / Finolex / Gloster.
3.5 Core x 400.0 Sq.mm
Laying XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I in ground in as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. and on surface as per site conditions as required of size-
630.0 Sq.mm Armoured. 3.5 Core.
Supplying and making one end termination with heavy duty single compression brass gland SIBG type(1no.), heavy duty aluminium lugs(4nos.) of respective required size, duly crimped with crimping tool, PVC tape etc for following size of Armoured XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Comex/ Comet / Jainson
3.5 x 400.0 sq.mm
3.5 x 630.0 sq.mm
Providing XLPE insulated & P.V.C. sheathed cable of 1.1kV grade with Copper conductor of IS:1554 P-I / IS :7098 as required of size. Make: Havell's / Poycab / RRKable / Finolex / Gloster.
4core X 95 sqmm
4core X 185 sqmm
Laying and fixing of one number PVC insulated cable of following size on cable tray as required-
95 sq. mm (clamped with 25x3mm MS flat clamp)
185 sq. mm (clamped with 25/40x3mm MS flat clamp)
Providing & Fixing of brass compressoin gland SIBG type & heavy duty copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured XLPE copper conductor cable of following size as required Make: Comex/ Comet / Jainson-
Gland of size: 4core X 95 sqmm
Gland of size: 4core X 185 sqmm
Copper lug of size: 95 sqmm
Copper lug of size: 185 sqmm
Supply, Fabricating & installing following sizes of powder coated perforated M.S. cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders, fastners, supports etc. as required of Make: Profab/ Pilco/ Needo
225mm x 50mm x 1.6mm
Supplying & Making Heat shrinkable type outdoor straight through joint for following size of XLPE insulated aluminium conductor cable of 1.1 KV grade including cost of compound, sleeves etc. as required of Make: Raychem / M - Seal / Shrinkfit
3.5 x 630.0 sq.mm
Supply, Installation, Testing & Commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardwares, duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate M.S. base channel, hinged doors with locking arrangement for all equipments & switchgears Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm . Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls compartments having bolted type doors with & without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator only)
Pre-fabricated panel
Pre-fabricated panel
Supplying and fixing of Aluminium bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with heat shrinkable PVC sleeves
Electrolytic grade Aluminium bus bar
Electrolytic grade Aluminium bus bar
Supplying and fixing of Multi function meter with LED display capable of measuring electrical parameters like V, I, F, PF, kW,kVA, kVAr, kWh, kVAh, kVARh display with 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect. Make: Schneider / L&T.
Supplying and fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required . Make: Schneider / L&T / Seimens
From 2000 / 5 to 3200 /5 Ratio , 15 VA, class 1 accuracy
Supplying & Fixing of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required of Make: Schneider / L&T / Seimens
Red colour
Yellow colour
Green colour
Blue colour
Supplying, Installation, Testing & Commissiong of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required of Make: Schneider / L&T / Seimens / ABB / Legrand
630 Amp , 50 kA, adjustable O/L & adjustable S/C setting, Ics = 100 % Icu With Microprocessor based release
400 Amp ,35 kA, adjustable O/L & adjustable S/C setting, Ics = 100 % Icu With Thermal Magnetic release
160 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu With Thermal Magnetic release
BBN ENERGY SYSTEMS PVT LTD
GROWTH ASSOCIATES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .