Renovation of Canal Chowki at Ch.69652 mt on Ukai Left Bank Main Canal.

Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C.work

Demolition of Brick work and stone masonry including stacking of serviceable materilas

2 20.24 and disposal of unserviceable materials with all lead and lift.(i) In Lime Mortar. 375.02 Cu.mt.

Dismantling doors, windows, ventilators etc (wood or steel) shutters including chowkhats,

architraves, holdfasts and other attachment etc. complete and stacking them within all lead

and lift (i) Not exceeding 3 Sq.m. in area

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier

4 0.0034 28455.09 Hectare

and disposal of unserviceable materials (C) By mechanical means in area of light jungle.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead. (A)Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking

6 7.40 of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or 166.44 cmt.

Filling available excavated earth (excluding rock) in plinth, sides of foundations etc. in

7 26.94 layers not exceeding 20 cm. in depth consolidation each deposited layer by ramming and 133.65 cmt.

Providing and laying controlled cement concrete M.150 for curing complete excluding cost

8 5.29 of formwork and reinforcement for reinforced concrete work in (A) Foundations, 4007.51 cmt.

footings,Base ofcolumns and Mass concrete

M20 - Footing

Providing and laying controlled cement concrete M.200 and curing complete

9 10.14 excluding the cost of formwork and reinforcement for reinforced concrete work in (A) 4098.94 Cu.mt.

Foundations, footings, Base of columns and Mass concrete

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

10 47.63 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 179.36 smt

reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns

etc. and Mass concrete.

M20 - Column

Providing and laying controlled cement concrete M.200 and curing complete excluding the

cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts upto

floor two level. (upto 10 ton)

M20 - plinth beam

Providing and laying controlled cement concrete M.200 and curing complete excluding the

cost of formwork and reinforcement for reinforced concrete work in (C)

Slabs,landing,shelves,Balconies,Lintels, Beams, Girders and Cantilever upto floor two level.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

13 36.40 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 202.18 smt

reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (L) Chullah Hoods, weather shades

Chhajjas Corbels etc. including edges. (upto 10 ton) for Chhajja.

Providing formwork of ordinary timber planking so as to give a rough finishincluding

centering shuttering strutting and propping etc. height of propping and centering below

16 41.11 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ 311.43 smt

reinforced concrete andplain concrete work in. (G) Columns PillarsPosts and struts. (1)

Square Rectangular Polygonal in plan.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

17 2239.89 placing in position complete upto floor two level 77.29 Kg

Providing & Laying Brick work using common burnt clay building bricks having crushing

18 4.19 strength not less than 35 kg/Sq. cm. in foundations , plinth in cement mortar 1:6 (1 cement 4121.55 cmt

: 6 fine sand) (B) Conventional,Ground Floor

Extra for brick work in superstructure above floor two level (B) Conventional (upto 10 ton)

18.1 12.32 Ground floor 4162.74 cmt

18.2 2.69 First Floor 4203.92 cmt

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-

19 38.27 cement:3-sand) (For Ceiling Plaster) 144.79 smt

Ground Floor

Providing & applying 15mm thick Mala plaster on walls consistingof 12mm thick backing

coat of C.M. 1:4 (1 cement : 4 sand ) and 3mm thick finishing coat of C.M. 1:1 (1 cement :

20 99.06 sand) including curing, necessary scaffolding in true line & level etc. comp. as directed by 252.72 Smt

Engineer in charge

20mm thick sand faced cement plaster on walls upto height 10 meter above ground level

21 91.61 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 337.52 Smt

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing and fixing polished Black grenite slab(18 to 20 mm thick) for Door and Windoow

Framing as directed by Architect/ engineer-in-charge. (upto 10 ton)

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

23 24.84 adhesive material including dismentaling of existing flooring and jointed with color cement 1059.83 Smt

slurry including finised with flush pointing & cleaning the surface etc. complete for light

Providing and laying Vitrified tiles 8 to10mm thick, 24" x 24" vitrified' in flooring treads of

24 2.50 steps , skirting and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement:3- 1099.95 Smt

coarses and) finishing with flush pointing in white cement.

Providing and laying ceramic flooring tiles 6mm thick in Flooring treads of Steps &

25 4.86 Landings laid on a bed of 12mm thick cement mortar 1:3 (1:Cement,3:Corse Sand) Finished 929.39 Smt

With Flush pointing in White Cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm

26 12.38 thick cement plaster 1:3 (1-cement:3-coarse sand) and jointed with white cement slurry 1004.40 Smt

(upto 10 ton)

Providing and fixing 35mm thick shutters for doors, window and clearstory window

including Indian teak wood frames 12cm x 7cm size including black enamelled iron oxidised

27 7.35 fixtures and fastening including primer coat of approved quality and two coats of oil 5533.68 Smt

painting etc. complete.(ii) Fully Panelled.

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt.0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for

Providing and fixing standared extruded of alluminium section of size 63mmx

29 0.36 38.10mmx1.2mm , @Wt.0.643Kg/mt) with colour Powder Coated alluminium frame for 1175.56 Smt

ventilation with 5mm thick frosted glass as details etc complete for Ventilation.

Providing and fixing M.S. grills required in pattern with M.S.12 MM flats at required

spacings and frame alround, square bars with round headed bolts and nuts or by screws

30 72.00 .(A) plain grills, completed. 106.48 Kg.

Applying priming coat over new steel and other metal surface after and including preparing

the surface by throughly cleaning , oil , gresse , dirt and and other foreign matter and

sourced with brushes fine steel wood scrapes and sand paper with ready mixed priming

paint brushing red lead.

Painting two coat (excluding priming coat ) on new steel and other metal surfaces with

32 14.40 enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust 89.85 Smt

and other foreign matter.

Applying two coats of Birla or Asian acrylic lapy (putty) & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and othr foreign matter and sand papered

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture

on undecorated wall surfaces to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand paper smooth etc.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

35 91.61 give an required shape even shade after thoroughly brushing the surface to remove all dirt, 117.40 Smt

and remains of loose powdered materials.etc complete

Providing and fixing G.I. rain water spout of 50 mm diameter and 30 cm length.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x

40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and

37 25.00 two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained 391.93 Rmt

and fixed to posts with G.I,staples including fixing the posts in ground with 0.5 M x 0.5.M x

0.5 M. block in C.C1:5:10 etc complete.

Providing and fixing M.S. Gates of required pattern fix on brick walls/Columns prepared

with M.S. flats, angles, Square/round bars, square pipes, at required spacings with

necessary hold fasts as per detailed drawing etc. complete including applying primer coat

and enamel painting two coat.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580 mm.

including 100 mm. Size "P" or "S" trap for water closet squatting pan joining the trap with

pan and soil pipe cement mortar 1 : 1 (1 cement : 1 fine sand) etc. complete.(A) Vitreous

china long pattern of approved colour .

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding fittings.(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing pillar tap, capstan head, screw down high pressure with

screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing C.P. brass waste for wash basin or sink (B) 40 mm dia

Providing and fixing chromium plated, bottle trap with necessary couplings of approved

43 2.00 quality for wash basin. 295.80 Each

Providing and fixing chromium plated brass half trun flush cock of approved quality

44 1.00 including fixing in pipe line etc. complete.(i) 20mm dia. 254.78 Each

45 1.00 Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia. 88.65 Each

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735- 1999 of approved make for drainage system pipe line,

46 9.00 pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using 857.65 Rmt

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

47 10.00 wall with the help of clamp at every two metre C/C or shall be concealed as directed 195.67 Rmt

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Water Supply

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

48 5.00 having National Sanitation Foundation (NSF) seal for potable water of following dia. 170.36 Rmt

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

48.1 5.00 (B)20mm nominal outer dia pipes 208.80 Rmt

48.2 5.00 (C)25 mm nominal outer dia pipes 253.82 Rmt

48.3 8.00 (D)32mm nominal outer dia pipes 338.24 Rmt

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap

polished bright. (i) 15mm dia.(For WC)

Providing and fixing ball cock of approved quality as directed. (A) Copper Metal (ii) 50mm

Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete.(iii) 32mm dia.(For WC)

52 1.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. 314.73 Each

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required

53 500.00 3.95 Litre

capacity each with all necessary fittings and connection etc. complete on terrace.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self

54 1.00 cleaning design with C.I. screaed down or higned grating including cost of cutting and 635.91 Each

making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

55 1.00 water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard 1292.19 Each

weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton)

Water Supply

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

56 8.00 13.5) PIPE having National Sanitation oundation (NSF) seal for potable water of 660.58 Rmt

following dia. nominal bore tube fittings and clamps including making good the wall,

ceiling and floor etc. complete. [F] 50mm.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty

nonpressure pipes I.S. class NP2 of the following internal diameter with collars and

butt ends prepared for collar joints including testing of joints complete.(B) 150mm

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight

of cover with frame to be not less than 38Kg.(Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line. (upto 10 ton)

Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats

with dry masonry work at top for 45cm. height including covering the top with

59 1.00 stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as 3427.65 Each

directed. (upto 10 ton)

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type

of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular

type switch / bell push & accessories and earth continuity of following type, erected on

60 9.00 PVC / Metallic box, single mounting base frame covered with textured/metallic front plate 429.25 Pt.

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat- II

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator with separately

61 2.00 mounted and accessories with earth continuity of following type erected on PVC / Metallic 618.12 Pt.

box, single mounting base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories Cat- II

Point wiring for independent PLUG with following size mains earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /flushed on wall/ceiling , complete with

62 ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection

erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

[A] For 6 amp plug and 6 amp switch with For 2-1.5 sq.mm Cu. Mains (a) with medium

62.1 2.00 class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete 313.10 Pt.

[B] 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb db boards.(a)

62.2 2.00 with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete 493.89 Pt.

Point wiring for looped Plug with Moduler type single pole ISI marked Switch and socket

erected with necessary connections erected on polished wooden block / Metal / PVC Box

63 2.00 covered with 3 mm. thick laminated sheet for open / concealed wiring. [A] For 6 Amp. 66.66 Pt.

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected Open/ concealed in/ flushed on wall/ ceiling,

complete with 6A Modular type switches and following type of accessories erected on PVC/

Metallic box, single mounting base frame covered with textured/ metallic front plate

modules erected on/ in wall/ ceiling as per pipe erected. With necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.(a) with medium class Rigid PVC pipe

and accessories.Cat.II

Mains with 1.1 K.V .grade FRLS PVC insulated ISI marked Stranded Copper conductor wire

in rigid pvc pipe to be erected concealed in / flushed on wall / ceiling with 1.5 Sq.mm.

65 30.00 copper conductor FRLS PVC insulated stranded wire of green color for earth continuity of 102.01 Mtr

following size. (a) with Medium class Rigid PVC pipe and accessories.(d) 3 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor

66 15.00 FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) 142.41 Mtr

with medium class Rigid PVC pipe and accessories (d) 3 wire 4 sq. mm

Providing & erecting 240 V MCB Double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat.III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V.

68 1.00 having characteristic of quick action & tripping with all advance feature & do not 2235.13 Ea

incorporate any electronic component. for following Max. rating erected as directed.(ii)

Amps. DP Cat.III

Supplying and erecting nuwood 12mm thick on existing angle iron frame or wooden patti

SITC of IP65 Surface / suspension mounted waterproof luminaire, Polycarbonate housing

and linear prismatic ribbed cover providing excellent distribution of light, Convenient

Polycarbonate fastening clips and hinged diffuser to make it easy to replace lamps, Press fit

CRCA gear for ease of maintenance. complete with starter, polyester choke copper wound

complete erected with 40/36 watt tube holders. with lead wire and connections. with wall

70 5.00 Mounting Clamp. (Min Two Clamp for each tube Luminary) (b) with 1 tube 36 watt High 151.50 Ea

Lumen (3250 Lumen) Tube. Equivalent to Philips Make TCW450-136 OR Havells-

LHIF55136026 or Bajaj-BJI 136/140 PC WEB1, Crompton-IPFC1114HSB (MR) (To be used for

ceiling Mounting). Contractor Has to submit NABL approved Laboratory Test certificate of

model to be offered for confirmation of above specification.

Providing and erecting Approved make Power Saving Max. 50 Watt Ceiling fan with double

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete having

71 2.00 blades with aluminium blades with canopy and 30 cms. down rod erected on existing hook 1948.29 Ea

or clamp with 24/0.2 , 3 core flexible wire with earthing. [Latest 5 star Rating as per list

declared by Engineer in charge]

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up

to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

73 1.00 ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 8623-1 &

74 3,IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (A) Single phase incoming and

horizontal single phase outgoing

74.1 2.00 (b) (i) 4 way Sheet Steel Double door (IP-43) 629.23 Ea

74.2 2.00 (b) (ii) 6 way Sheet Steel Double door 885.77 Ea

75 1.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Kg

SITC of 15 Watt LED Fitting Contractor Has to submit NABL approved Laboratory LM 79 and

76 2.00 LM 80 Test certificate of model to be offered for confirmation of specification. 3026.97 Ea

Providing Street Light pole bracket consisting of medium class MS pipe of 4.2 cms. Out side

dia complete with suitable sleeve tubing 45 cms. long M S. pipe (Medium Class). Suitable

for 76.5 mm /80mm / required size of pole top having sufficient fastners for fixing the

77 2.00 brackets and having spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable 626.20 Ea

welded stays, reducer and with check nuts complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with following nos of

arms.Single Arm Bracket 1.5 Mtr

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system

78 2.00 and having breaking capacity 10 KA to be erected in existing box. confirming to IS 270.68 Ea

8828/1996 with ISI Mark.Cat.III

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with bakelite connector strip 4way & hinged doors

79 2.00 having locking arrangements with mounting clamp with nuts, bolts & washers suitable for 515.10 Ea

erection on pole with cable clamps& earth bolt of following size of box.(b) 250mm x

200mm x 100mm [deep]

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to

be erected as directed of following size. (c)3 core 6 Sq. mm

Total Rs. (A)

Credit of Dismentaled Materials like, (Considering 30% materials available from

dismentalling & considering rate 40 %)

81.1 90.36 (i) steel work 30.92 Kg

(ii) Brick work and stone masonry including stacking of serviceable materials

(iii) doors, windows, ventilators etc (wood or steel) shutters including chowkhats,

architraves, holdfasts and other attachment etc.

Total Rs. (B)

Total Rs. (A - B)

I/We am/are willing to carry out the work at _______________% above/bellow percent (should be written in figures and words) of the estimated rates mensioned above.

· Estimated amount Estimated amount

Put to tender Rs______________________ Put to tender Rs______________________

Deduct: _________% bellow Rs______________________ Add: _________% bellow Rs______________________

Net Rs______________________ Total Rs______________________

In words __________________________________________ In words __________________________________________

*( Please strike out whichever is not applicable).

Note 1- All works shall be carried out as per Public Work Department Hand book and other specification of the Division or as directed

Note 2- All the columns in Schedule should be filled in ink and the total entries in the last column should be struck by the contractor under his signature.

Note 3- Rates quoted included clearance of site (Prior commencement of work and at its close) in all respect and hold good for work under all cocition, site,

Note 4- To be continued on additional sheet, if found necessary.

Deputy Executive Engineer, Executive Engineer

ULBC Sub Dn Ukai Left Bank Canal Inv.Dn No.2

Buhari Valod