Nirmal Gujarat 2.0

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

1 Proving and fixing to wall,ceiling and floor 80.00 One 401.95

galvanised mild steel tubes(Medium grade) of the Rmt.

following nominal bore, tube, fittings and clamps

including making good the wall,ceiling and

floor.(A) 25mm.

2 Providing and fixing water closet squatting pan 4.00 One 1464.39

(Indian type W. C., Pan) size 580 mm. vitereous No

china long pattern white colour 100 mm. size P or S

trap with jointing the trap with the pan & soil pipe in

C. M. 1:1 and fixing a pair of footrest of size 250 mm. x

130 mm. x 30 mm., in C. M. 1:3 fixing and G. I. Inlet

connentions for flush pipe with W. C. PAN etc. comp

3 Proving and fixing to wall,ceiling and floor 75.00 One 252.49

galvanised mild steel tubes(Medium grade) of the Rmt.

following nominal bore, tube, fittings and clamps

including making good the wall,ceiling and

floor.(A) 15mm.

4 Providing and Fixing of Wash basin of size 550mm. 12.00 One 1032.22

X400 mm clear size including couplings and waste No

pipe ,& fittings etc. complete. (i)Flat back wash

basin White vitrious china 550mm x 400mm type

5 Providing & fixing C.I manhole cover 0.60mt x 0.45mt 3.00 One 958.17

size having weight not less than 35 kg iron manhole No

6 Providing and laying broken chine mosaic 83.00 One 779.70

flooring for terrace using 12 mm to 20 mm broken Sqm

pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white

cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing

with water and oxalic acid etc. as directed.

7 Providing and fixing M.S. Grills of required pattern to 530.00 One 160.85

wooden frames of window etc withb M S Flates at Kg.

reqd. specing and frame alround ,square or round

bar with round headed bolts and nuts or by skerws.

(B) Ornamental grill.

8 Providing and fixing urinal in partion wall of 12.00 One 428.92

polished kotah stone size 0.6x1.20 mt thickness of No

kotah stone 25mm

9 Providing & fixing electrification as per 50.00 One 400.00

requirement using approved ISI materials wires No

switch incl. all fitting accessories etc. comp As

direceted by in charge engineer L.S. as required (A)

Wireng Ele. Points

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

10 Providing & fixing electrification as per 2.00 One 600.00

requirement using approved ISI materials wires No

switch incl. all fitting accessories etc. comp As

direceted by in charge engineer (Market Rate) L.S.

as required (D) Wiring 15A

11 Electrical accessories (1) Tube Lights T5 8.00 One 450.00

12 Electrical accessories (2) LED Lamp 25.00 One 150.00

13 Electrical accessories (3) Fan 3.00 One 3500.00

14 Electrical accessories (4) Ele. Motor 1 HP 2.00 One 6000.00

15 Providing and fixing 30mm thick Solid Panel PVC 15.50 One 1146.37

Doors shutter consisting of frame made out of M.S. Sqm

tubes of 19 guage(1.016mm) thickness and size of

19mmX19mm for stiles, &15mmX15mm for top &

bottom rails M.S. frame shall have a coat of steel

primers of approved make and manufactures M.S.

frame shall be covered with 5mm thick heat moulded

PVC "C" channels of size 30X50mm forming stiles. and

5mm thick, 75mm wide PVC sheets for top rail, lock

rail & bottom on either side, and 10mm (5mmX2)

thick, 20mm wide cross PVC sheet as gap inserts for

top rail &* bottom rail. Panelling of 5mm thick PVC

sheet to be fitted in the M.S. frame welded / sealed to

the stiles & rails with 30mm wideX5mm thick PVC

Sheet beading on either side, and jointed together

with solvent cement adhesive etc. An additional 5mm

thick PVC. stip of 20mm width is to be stuck on the

interior side of the 'C' Channel usinjg PVC Solvent

adhesive and anodized alluminium fixtures &

fastening as per details drawing.etc. complete as per

direction of Engineer- in-charge

16 Providing and fixing in position callapsible steel 5.70 One 6116.59

shutters with vertical channels 20 x 10 x 2 mm braced Qtl.

with flat iron diagonals 20 x 5 mm size with top and

bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of read lead paint.

17 Applying two coats of Birla or Asian acrylic lapy ( 61.00 One 123.44

putty) & two coats of primer of approved brand and Sqm

manufacture on new wall surface incl. Wall

painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and

sand papered smooth.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

18 Providing and fixing window having extruded 2.00 One 1583.95

aluminum Colour anodized section frame main outer Sqm

size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of

size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters

of horizontal member size 40 mmx18mm

x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

19 Providing and fixing urinal or approved quality 4.00 One 1631.88

including connection with trap and with (A) No

Squatting plate pattern white earthen were 550mm

20 Excavation for foundation upto 1.5 m depth including 90.00 One 465.14

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

21 Providing and laying cement concrete 1:4:8 (1- 24.00 One 2769.69

Cement : 4- coarse sand : 8- hand broken stone Cum

ggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

22 Providing and laying cement concrete 1:3:6 (1-Cement 2.00 One 3070.94

: 3- coarse sand : 6- hand broken stone aggregates 40 Cum

mm nominal size) and curing complete excluding cost

of formwork in (A) Foundation and plinth

23 Providing 10 mmthick cement plaster in single coat on 103.00 One 165.05

fair side of Brick/concrete walls for interior Sqm

plastering upto floor two level and finished even

and smooth in (I)cement mortar 1:6 (1 cement:6 sand)

.Upto floor two level finished even & Smooth with

floating coat of neat cement slurry.

24 Providing and laying ordinary cement concrete 1:2:4 9.00 One 8518.15

(1- Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) for R.C.C lintel including

finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of

25 Providing TMT Bar FE 415 reinforcement for R.C.C. 3150.000 One 68.33

work including bending, binding and placing in Kg.

position complete upto floor two level

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

26 Filling in foundation and plinth with murrum or 125.70 One 301.78

selected soil in layers of 20cm. Thickness including Cum

watering, ramming and consolidating etc. complete.

27 Providing and Laying ordinary cement concrete 1:2:4 18.00 One 6888.15

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and finishing smooth with

curing etc. complete including the cost of formwork

but excluding the cost of reinforsement for R.C.C

work in (iii) Slabs having more than 10 cm and upto

13 cm. thickness

28 Brickwork using common burnt clay building 41.00 One 4496.05

brick shaving crushing strength not less than 35 Cum

Kg/Sqcm. in super structure Upto floor two level

in cement mortar 1:6(1 Cement ; 6 Fine sand)

29 20mm thick sand faced cement plaster on walls upto 244.00 One 342.41

height 10 metres above ground level consisting of Sqm

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

30 Brickwork using common burnt clay building 81.00 One 4214.33

brick shaving crushing strength not less than 35 Cum

Kg/Sqcm. in foundation and plinth in cement

mortar 1:6(1 Cement ; 6 Fine sand)

Conventional bricks

31 Ceramic flooring tiles tiles 6 mm thick in flooring, 39.00 One 992.15

treads of steps and landing laid on a bed of 12mm Sqm

thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement.

32 Providing & laying white glazed tiles 6 mm thick in 257.00 One 868.55

flooring treads of steps and landing laid on a bed of Sqm

12 mm thick C.M. 1:3 ( 1 cement : 3 fine sand) finished

with flush pointing in white Cement

33 Providing and laying polished Kota stone slab 13.00 One 1019.39

flooring over 20mm (Average) thick base of cement Sqm

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

34 Constructing brick masonry road gully chamber 4.00 One 3504.02

450mm x 450mm x 775mm with vertical grating No

complete With C.I.Manhole Cover 450x600 mm size

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

35 Providing and fixing wash down water closet 2.00 One 1660.47

European type W.C. pan with integral P or S trap No

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 fine sand) (sand) seat and

cover to be measured and paid for separately) (A)

Vitreous china pattern - I (I) white colour.incl.32mm

dia. Flush pipe connected with W.C. with G.I inlet etc.

36 Providing, laying and jointing in true line and 75.00 One 834.38

level 160 diametre U.P.V.C (Type B) conforming to IS Rmt

13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

37 Providing and fixing screw down bib taps of 24.00 One 186.83

following size.(A) Brass screw down bib tap polished No

bright. (i) 15mm dia.

38 Providing erecting and fixing double coated 3000.00 One 3.95

Syntex PVC. (ISI) water tank of required capacity Ltr

each with all necessary fittings and connection etc.

complete on terrace.

39 Providing and fixing 20X15X2.5 cm thick year plate of 2.00 One 138.14

marble stone set in C.M. 1 :4 including finishing and No

engraving letters etc comp.

40 Providing and laying 24" x 24" vitrified 8MM thick 41.00 One 1264.41

tile flooring over 20MM (average) base of cement Sqm

mortar 1:6 (1- Cement : 6-Coarse Sand) on new

surface or fixing on existing flooring by adhe-sive

material including dismentalling of existing flooring

and jointed with colour cement slurry including

finished with flush pointing and cleaning the

surface etc. complete. For Light shade

41 Finishing wall with weather proof exterior emulsion 244.00 One 75.68

paint on wall surface (two coats) to give an required Sqm

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

42 Providing and fixing S.W. gully trap with C.I. grating 12.00 One 1292.19

brick masonry chamber and water tight C.I. cover No.

with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

43 Providing and fixing urinal of approved quality 8.00 One 1074.86

including connection with trap and with integral No

longitudinal flush pipe (A) White earthen ware flat

back or corner type size 430mm x 260mm x

Twenty Lakh Eight Thousand Eight Hundred Eighty Rupees And Eighty Four Paisa

I \ We am \ are willing to carry out the work at ……………………… % above \ below percent ( Should be

written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division