Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | ₹2.5 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹2.6 L+₹12,520.98 (5.03%)Rejected-Finance | ₹2.6 L+₹12,520.98 (5.03%) | L2 | Rejected-Finance SECOND LOWEST |
| Sl No | Description | Qty | Unit | ELDHO THOMAS L1 | AZEEB K L2 |
|---|---|---|---|---|---|
| 1.00BUILDING WORKS | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.54 | cum | 240 ₹129.6 Lowest | 241 ₹130.14 |
| 1.00 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.54 | cum | 7,997 ₹4,318.38 Lowest | 7,999 ₹4,319.46 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 285.14 | kg | 180 ₹51,325.02 Lowest | 182 ₹51,895.3 |
| 1.00 | OD455756/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of
corrugation as approved by engineer in charge)0.35mm(+0.05%),total coated thickness with zinc coating 120
grams per sqm as per IS :277 in 240mpa steel grade 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns ,sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportaion and should be supplied in single length upto 12 metre or as desired by
engineer in charge .the sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm)with
EDPM seal ,complete upto any pitch in horizontal or vertical to curved surfaces excluding the cost of purlins
,rafters and trusses and including cutting to size and shape wherever required. | 68.35 | sqm | 610 ₹41,693.5 Lowest | 800 ₹54,680 |
| 1.00 | OD455755/2025-2026:Providing and fixing200 mm dia PVC gutter on ms flat iron welded to roof truss
including cost and conveyance and labour charges etc complete | 19.9 | metre | 800 ₹15,920 | 611 ₹12,158.9 Lowest |
| 1.01 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 33.65 | sqm | 32 ₹1,076.8 Lowest | 33 ₹1,110.45 |
| 1.01 | 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 33.65 | sqm | 1,100 ₹37,015 Lowest | 1,114 ₹37,486.1 |
| 1.01 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | 56.75 | sqm | 755 ₹42,846.25 Lowest | 756 ₹42,903 |
| 1.01 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | 73.78 | kg | 550 ₹40,576.25 Lowest | 556 ₹41,018.9 |
Tender Value
₹2.5 L
EMD Value
₹6,342
Closing Date
10 Mar 2026, 6:00 pmClosed
GIREESH KUMAR V
AE LSGD PANAMARAM
PRO NO 103-26-Vadochal Anganwadi Maintenance in ward 10 at Panamaram gp-General Civil Work
2026_LSGD_842854_2
AE/LSGD/PNM/TNDR 07-2025-26
Open Tender
Civil Works - Buildings
Item Rate
PANAMARAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹560
Yes
₹6,342
Yes
AE PANAMARAM
13 Aug 2026
3 Mar 2026
11 Mar 2026
3 Mar 2026
10 Mar 2026
3 Mar 2026
3 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BUILDING WORKS | |||||
| 1.001 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 0.6 | kg | - | - |
| 1.004 | OD455756/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of
corrugation as approved by engineer in charge)0.35mm(+0.05%),total coated thickness with zinc coating 120
grams per sqm as per IS :277 in 240mpa steel grade 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns ,sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportaion and should be supplied in single length upto 12 metre or as desired by
engineer in charge .the sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm)with
EDPM seal ,complete upto any pitch in horizontal or vertical to curved surfaces excluding the cost of purlins
,rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.005 | OD455755/2025-2026:Providing and fixing200 mm dia PVC gutter on ms flat iron welded to roof truss
including cost and conveyance and labour charges etc complete | 1 | metre | - | - |
| 1.006 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 1 | sqm | - | - |
| 1.007 | 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 1 | sqm | - | - |
| 1.008 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | - | sqm | - | - |
| 1.009 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | - | kg | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1422538.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.67 MB
BOQ_1422538.xls
BOQ • 0.31 MB
SBD.pdf
Tender Documents • 2.72 MB
PreliminaryAgreement.pdf
Other Document • 0.09 MB
Affidavit.pdf
Other Document • 0.05 MB
formtender.pdf
Other Document • 0.05 MB
EPAYMENT.pdf
Other Document • 0.06 MB
IPACT_0001.pdf
Other Document • 0.06 MB
NIT.pdf
Tender Documents • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .