GE AF/AMB-14-2020-21 SPECIAL REPAIRS TO BUILDING NO. 48 OF 5 P AND SU INCLUDING CERTAIN SANCTIONED WORKS AT AF STATION AMBALA UNDER GE AF AMBALA

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep in soft / loose soil and getting out including taking out roots, shrubs etc, complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc.not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling all as specified and as directed

M&L for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, using broken stone or boulders complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description, removing debris from site and making good the disturbed surfaces / portions in existing specifications complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed

Dismantling stone slabs / tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed

Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and as directed

Dismantling brick tiles or terracing tiles, single layer on roofs, sorting and stacking serviceable tiles and disposing off unserviceable tiles complete all as specified and as directed

Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified and as directed

Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each but with shutters (without taking off shutters from the frame) and disposing off complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc. or insulation boards/slabs/blankets, any thickness including cover fillets and disposing off complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connections including disposing off, etc. complete all as specified and as directed

Taking up or down 20mm bore steel water tubing and connections including disposing off, etc. complete all as specified and as directed

Dismantling and taking up or down 75/100mm bore SGSW / PVC / AC drain pipes and connections from any position / location and disposing off complete all as specified and as directed

Dismantling and taking down PVC OH water tanks, 250/500litres capacity from any position / location including all hoisting/lifting, etc. and disposing off complete all as specified and as directed

M&L for plain cement concrete 1:5:10 (type E-2) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed

M&L for plain cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) as in floors, laid over roof slabs for padding, etc. finished to receive floor finishes, etc. complete all as specified and as directed

M&L for 25mm thick plain cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregates) as in floors, etc. complete all as specified and as directed

M&L for plain cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregates) as in roof kerbs (gola), etc. finished to receive floor finishes, etc. complete all as specified and as directed

M&L for plain cement concrete in 1:3:6 (type C-1) using 20mm graded stone aggregates as in filling in hold fasts, bed blocks, etc. including including weathering, slightly rounded or chamfered angles complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan as in half brick thick walls built in CM (1:4) complete all as specified and as directed

M&L rendering 15mm thick in cement mortar (1:4) on fair surfaces of PCC block / brick masonry wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15mm thick on brickwork or concrete surfaces, chajjas, etc. in CM (1:4) mixed with water proofing powder at rate of 3% of cement or as per manufacturer's instructions, finished even and fair without using extra cement complete all as specified and as directed Note: Water proofing compound shall be measured separately under respective item

M&L rendering 5mm thick in cement mortar (1:3) on fair surfaces of concrete as on ceilings, soffits of slabs, etc. finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cement mortar (1:6) on fair surfaces of PCC block / brick masonry wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brickwall or concrete surfaces complete all as specified in SSR Part-I clause 14.22 complete all as specified and as directed Note: Rough cast finish shall be made as under: (i) After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel / aggegates (of size between 6 to 12mm depending on the texture required) mixed with course sand and cement in the ratio of 1:1:1 shall be applied and finished even (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered

Supply only water proofing compound all as specified

M&L for treatment to sunken slabs by applying evenly a coat of blown type bitumen @1.5kg/sqm and sprinkling clean dry sand @0.05cum/sqm and laying polythene film, 50micron laid over a coat of bituminous primer @0.30 to 0.50kg/sqm to ensure water tightness including all ponding, testing, etc. complete all as specified and as directed

M&L for preparation of newly plastered surfaces of walls and applying 2 coats of oil emulsion distemper over a coat of wall primer including a coat of wall care putty 3mm thick and filling to make surface even complete all as specified and as directed

M&L for preparation of newly plastered surfaces of ceilings and applying 2 coats of oil emulsion distemper over a coat of wall primer including a coat of wall care putty 3mm thick and filling to make surface even complete all as specified and as directed

M&L for preparation of old treated plastered surfaces of walls and applying 2 coats of oil emulsion distemper over a coat of wall primer including a coat of wall care putty 3mm thick and filling to make surface even complete all as specified and as directed

M&L for preparation of old treated plastered surfaces of ceilings and applying one coat of oil emulsion distemper over a coat of wall primer including a coat of wall care putty 3mm thick and filling to make surface even complete all as specified and as directed

M&L preparation of new plastered / unplastered wall surfaces of any description and applying 2 coats of cement based paints (tint as approved by the GE) as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L preparation of old plastered / unplastered wall surfaces of any description and applying one coat of cement based paints (tint as approved by the GE) as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L for 40mm thick brick tiles laid, bedded and jointed in 15mm thick CM screed 1:6, joints grouted in CM (1:3) complete all as specified and as directed

--ditto-- all as per item No. 41 hereinabove but except tiles Note: Serviceable brick tiles retrieved from dismantling shall be used in this item

S&F steel water tubing, 15mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS: 1239 fixed to walls / ceilings or laid in floor / trenches complete all as specified and as directed

S&F steel water tubing, 20mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS: 1239 fixed to walls / ceilings or laid in floor / trenches complete all as specified and as directed

M&L for mild steel TMT CRS (corrossion resistant steel) bars grade Fe-500D, 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and as directed

M&L for RCC 1:2:4 (nominal mix) type B1, using 20mm graded stone aggregates aschajjas, balconies and similar works upto 1.5m clear span, complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.11sqm and not exceeding 0.18sqm in size, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for glazed ceramic tiles, coloured of size 300x450x7 to 8mm thick, of superior quality on vertical faces, dados, skirting, risers, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M&L for vitrified ceramic tiles, coloured, 10mm thick, joint free, edge cut, area of each tile not exceeding 0.36sqm, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

S&F solid PVC wall lining consisting of 5mm thick plain coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as shown on drawing complete all as specified and as directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and as shown on drawing complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain/wooden grain printed coloured PVC sheet reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed

S&F factory made solid panel PVC door shutter, 30mm thick, consisiting of MS frame made out of MS tubes for top and bottom rails, MS frame shall be moulded with plain coloured PVC 'C' channel and having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheet top rail, lock rail and bottom rails, paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to stiles and rails with suitable PVC sheet beading and jointed together using solvent and fixed in position in frame as per site requirement and specified in MES Schedule 2009 complete all as specified and as directed

Supply and fixing in position anodised (minimum thickness of anodising shall be 15microns) aluminium sliding window / ventilator (Bombay sliding window) and chowkhat made out of hollow extruded aluminium sections as detailed, glazed with tinted glass 4mm thick fixed with glazing clips, rubber beading /gasket anodized aluminium beading screws and lock type handles of size 75mm, 2Nos aluminium tower bolts 150mm long etc complete all as specified and as directed Section details: Shutter top & bottom: 101.60 x 44.45 x 1.5mm thick Shutter inner lock rail: 37.50x15x1.5mm thick Shutter side (handle) rail 37.50x15x1.36mm thick Chowkat bottom: 50.30x26x1.20mm thick Chowkat top & sides: 50.30x15x1.00mm thick

Supplying and fixing in position anodised (minimum thickness of anodising shall be 15microns) aluminium door and chowkhat made out of hollow extruded aluminium sections as detailed, each door having 02Nos disc or 'D' type handles, 02Nos aluminium tower bolts 200mm size, one brass mortice lock six levers with key in duplicate, fixed with aluminum hinges to chowkhat shutter, partly glazed with 5mm thick tinted glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket anodized aluminium beading screws, etc. complete all as specified and as directed Section details: Chowkhat Frame: 110.60x44.45x1.55mm thick Shutter vertical/stile: 85x44.45x1.54mm thick Shutter middle rail: 83.50x44.45x1.54mm thick Top & bottom rail: 115x44.45x1.54mm thick

M&L for aluminium anodised (white or tint as approved) grill of approved design, DG-104 pattern (10X5.2mm), medium weight, fixed with anodised aluminium 'F' sections (25x25x1.4mm) to aluminium window / ventilators, etc. all as per manufacturer's instructions complete all as specified and as directed

S&F aluminium butt hinges, 75mm long, cold rolled, medium weight, fixed with stainless steel screws complete all as specified and as directed

S&F 150mm long extruded aluminium alloy, handles, anodised, fabricated type complete all as specified and as directed

S&F aluminium anodised barrel tower bolts 150mm long of extruded section, complete all as specified and as directed

M&L for 18 to 20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 20mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed

S&F PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints fixed to walls with suitable clamps, etc. with PVC cowl including necessary staging / scaffolding, etc. as required complete all as specified and as directed

S&F PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints laid in trenches / floors with PVC cowl including necessary staging / scaffolding, etc. as required complete all as specified and as directed

S&F PVC (SWR) bends, 110mm dia, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed

S&F PVC (SWR) junction, single (single 'T'), equal / unequal, suitable for 110mm dia pipes, ISI marked, with rubber ring joints, etc. complete all as specified and as directed

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed

S&F cast iron Nahani trap, with grating including jointing to waste pipe (dia of outlet 100mm) fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed

S&F in repairs 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, as fixed in repairs complete all as specified and as directed

S&F 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, as fixed in repairs complete all as specified and as directed

S&F in repairs 10litres capacity PVC flushing tank (white), syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F 20mm dia ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F in repairs MS chromium plated grating, fixed to floor trap / Nahani trap in CM 1:6 complete all as specified and as directed

S&F in repairs wash hand basin, vitreous China, white (flat back type) of size 630x450mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed

S&F 15mm dia stop valves / angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia stop valves / angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 20mm dia stop valves / angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia stop valves / angle valves, concealed type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 20mm dia ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F brass chromium plated tubular towel rail 'D' type 20mm dia and 600mm long between flanges, minimum weight 190gms, fixed with suitable brackets complete all as specified and as directed

S&F 15mm PVC connections, 450mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed

S&F in repairs 15mm PVC connections, 600mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed

S&F in repairs vitreous China urinal, half stall type, white, of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including CP urinal spreader, providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing pan with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern), coloured (as approved), with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed

S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap, connecting to flushing pipe and trap and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F health faucet, telephone type, with CP arms, flexible pipe (ABS body) with 1.0m long PVC tube and wall hook of approved finish complete all as specified and as directed

S&F in repairs corner shelf of size 250x250mm made out of 7mm thick superior quality glass with CP bracket an railing and fixed complete all as specified and as directed

S&F in repairs brass, chromium plated shower rose, with or without swivel joint, fancy type, 125mm size including fixing to steel pipe or union 15mm bore complete all as specified and as directed

S&F in repairs 15mm dia brass chromium plated fancy type, central hole basin mixer without pop-up waste system with 450mm lonh braided hose complete all as specified and as directed

Supplying, hoisting, fixing and connecting up rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed

M&L for Atactic Poly Propaneylene (APP) modified bituminous membrane, weight not less than 4.0kg/sqm, reinforced with non-woven polyester fibre @160gm/sqm by torch method as per manufacturer's instructions complete all as specified and as directed Specifications for membrane: (i) Softening point 150oC minimum (ii) Cold flexibility (-)2oC minimum (iii) Single centre core non-woven polyester reinforcement of not less than 160gm/sqm (iv) Tensile strength of 650N/sqcm and 450N/sqcm in longitudinal and transverse directions respectively (v) Minimum elongation of >20% in both directions (vi) Dimensional stability of 1% maximum (vii) Water tightness / impermiable at 2kgf/sqcm (viii) Water absorption of not more than 1% on mass within 24hrs (ix) Overlaps of minimum 100mm on longitudinal direction and 150mm along transverse direction shall be maintained while laying

Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed

Taking down MCBs from any position / location and disposing off including shutting down of power supply, etc. complete all as specified and as directed

Taking down MCB DBs from any position / location and disposing off including shutting down of power supply, etc. complete all as specified and as directed

M&L for point wiring, concealed type, with 1.5sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100volts grade drawn through and including non-metallic rigid PVC conduit, medium grade minimum 20mm dia, ISI marked and all conduit accesories concealed in wall/celing/roof, etc. with sunken type pressed steel/welded MS terminal boxes made out of 1.6mm MS sheet, 3mm thick laminated sheet top cover for mounting of fittings, switches, sockets outlets, regulators, etc. including provisining of 1.5sqmm FRLS PVC insulated unsheathed cable 1100volt grade with multi-standed copper conductor to common earth dolly for earth wire for complete all as specified and as directed for the following:

One light / fan point controlled by one switch 6A one way

One 3 pin switch socket oulet 6A on independent board

One 3 pin switch socket oulet 6A on same board

M&L for point wiring, surface type, with 1.5sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100volts grade drawn through and including non-metallic rigid PVC casing caping, medium grade minimum 20mm wide, ISI marked and all casing accesories fixed on wall/celing/roof, etc. with sunken type pressed steel/welded MS terminal boxes made out of 1.6mm MS sheet, 3mm thick laminated sheet top cover for mounting of fittings, switches, sockets outlets, regulators, etc. including provisining of 1.5sqmm FRLS PVC insulated unsheathed cable 1100volt grade with multi-standed copper conductor to common earth dolly for earth wire for complete all as specified and as directed for the following:

One light / fan point controlled by one switch 6A one way

One 3 pin switch socket oulet 6A on independent board

S&F flame proof, heavy duty, metalic body with metalic blades, legs, ISI marked energy efficient BEE five star rated exhaust fan, 457mm sweep, 1440RPM, CFM 4000 with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including making hole on wall grouting bolts nuts washers, etc. complete all as speceified and as directed

S&F flame proof rotary type switch with termination box in aluminium alloy LM6 FLP 16A 250V with wire guard complete all as specified and as directed

S&F switch 6Amp, piano, flush type, single pole, one way, 240V complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin, 6A, flush type, single phase, 240V complete all as specified and as directed

S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed

S&F PVC lamp holder, insulated body, bracket holder / angle holder 240V complete all as specified and directed

S&F LED tube light fitting 1x18W, 230V, PF 0.9, CRI> 70, L 70, in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with suitable size rod including taking down old / unserviceable light fitting any type complete all as specified and as directed

S&F in repairs indoor decorative LED batten with opal diffuser with inbuilt LED tube 10W and driver designed with high transmitting optics for even light distribution IP 20 degree protection having length 620mm and PF 0.9, CRI> 70, L 70 and connecting with twin core twisted flexible copper conductor cable including taking down old / unserviceable light fitting any type complete all as specified and as directed

S&F metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket with and inlcuding 01No. SP MCB 20A 10kA complete all as specified and as directed

Supply, laying, jointing, connecting and testing of 2core 10sqmm XLPE / PVC sheathed cable 1100V (earthed) grade, insulated, screwed PVC bedded, armoured electric power cable, heavy duty multi-stranded aluminium conductor laid in trenches / fixed on walls, etc. complete all as specified and as directed

M&L submain wiring, using proper colour coding, with 2 runs of single core 2.5sqmm PVC insulated FRLS cable, unsheathed, 1100V, multi-stranded copper conductor cable and 1 run of 1.5sqmm PVC insulated FRLS cable, unsheathed, 1100V, multi-stranded copper conductor cable as earth conductor in green colour, drawn through and including PVC conduit, 25mm bore, medium grade, ISI marked and accessories / fittings and connecting to common earth terminals on walls/floors/ceiling etc. concealed in walls/floor/roof, etc. complete all as specified and as directed

M&L submain wiring, using proper colour coding, with 2 runs of single core 4sqmm PVC insulated FRLS cable, unsheathed, 1100V, multi-stranded copper conductor cable and 1 run of 2.5sqmm PVC insulated FRLS cable, unsheathed, 1100V, multi-stranded copper conductor cable as earth conductor in green colour, drawn through and including ERW steel conduit, 25mm bore, medium grade, ISI marked and accessories / fittings and connecting to common earth terminals on walls/floors/ceiling etc. concealed in walls/floor/roof, etc. complete all as specified and as directed

M&L submain wiring, using proper colour coding, with 2 runs of single core 4sqmm PVC insulated FRLS cable, unsheathed, 1100V, multi-stranded copper conductor cable and 1 run of 2.5sqmm PVC insulated FRLS cable, unsheathed, 1100V, multi-stranded copper conductor cable as earth conductor in green colour, drawn through and including PVC conduit, 25mm bore, medium grade, ISI marked and accessories / fittings and connecting to common earth terminals on walls/floors/ceiling etc. concealed in walls/floor/roof, etc. including taking down old / unserviceable wiring and disposing off complete all as specified and as directed

Notes for item Nos. 112 to 114: (i) 2/4runs of 4/10sqmm cable, one/two runs of 2.5/6sqmm earth cable and one run of 25mm bore PVC/ steel conduit shall be measured as 1Rm (ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum dia of PVC / steel conduit shall be 25mm, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of PVC conduit as per requirement at site

S&F sheet metal enclosures for MCB distribution board 230V SPN 4 way, double door, flushed inside the wall with 200A rated busbar complete all as specified and as directed

S&F MCB SPN 5 to 40A 'B' curve 240V 50Hz 10kA finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter, two position dolly complete all as specified and as directed

S&F MCB SP 5 to 40A 'B' curve 240V 50Hz 10kA finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter, two position dolly complete all as specified and as directed

Supplying, fixing / laying steel water tubing, 40mm bore, light grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed

M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes

Supply and laying burnt bricks of sub-class 'B' designation 75 laid in trenches for cable protection complete all as specified and as directed

M/s B.S.Jain

Anil jindal and sons

MAHESH GAUR AND CO.