Restoration of rain damages on Saigaloo Suka Kun road Km 0/00 to 4/00. (SH Repair of Pot holes between Km 0/00 to 4/00) under PDNA 2025

Providing and applying tack coat with Bitumen ( RS-I) using pressure distributor at the rate of 0.25 to 0. 30 kg per sqm (zero point two five to zero point three zero kilogram per square metre) on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge .

Providing and laying Bituminous concrete 30 mm thirty millimetre) compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density including carriage of material within all leads, lifts and other incidental charges and as per specification, complete and as per directions of Engineer-in-Charge.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto any lead of laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 including carriage of material within all leads, lifts and other incidental charges and as per the entire satisfaction and direction of Engineer-in-Charge.