E.M.S Memorial Multipurpose Seminar Hall at Kariavattom Campus Phase II Furniture Works Retender

Amount

Furniture

od256360/2022_2023 : Supplying fabricating and installation of Single Seater Sofas Type I Chairs (Front row Chairs) complete<br>BACKFRAME: 810 mmx455 mm made with 20x20mm16 swg tube average cushion thick of 6.50 inches, a-combination of PU foam of 20mm thick of 28kg/m3 density topped over frame and upholstery filled with recon fibre of virgin conjugated hollow siliconised polyester fibre15DN x 64 mm cut length with headrest & lumbar support and frames stripped with 22 swg CR sheet in suitable spacing and shape to support for upholstery work and back board 5 mm upholstered all metal portion powder coated.<br>SEAT FRAME: 480x 455 mm made with 25mmx25mm pipe of 18 swg average cushion thickness of 6 inches a-combination of PU foam of 40 mm thick of 32kg/m3 density topped over frame and upholstery filled with recon fibre of virgin conjugated hollow siliconised polyester fibre15DN x 64mm cut length and frames stripped with 22 swg sheet in suitable spacing and topped with hard board of 3mm for support the upholstery and all metal portions powder coated. <br>SIDE STAND: 630mm x 630/510mm made to shape of 40mm x 20mm 18 swg tube and 6mm MS flat to meet the structural requirements and side covered with fabric upholstery board along with cup holder. For all inside legs up to half portion and every end row leg should be completely covered fully with the fabric upholstery board and all metal parts powder coated.<br>MECHANISM: Push back slider with Roller and box type, roller of 14mm thick nylon casted noise free treated meta roller and box 2nos. each fabricated with 50mm x3mm thick flats, 25mm sq. 18 swg pipe 2 stays, provided with coil springs and of lacquer paint finished or powder coated.<br>UPHOLSTERY:3mm foam laminated fabric of approved shade of special cloth made for theatre seating.(water repellent &fire retardant optional)<br>FOUNDATIONBOLT: 90x8mm, chemical bonding with2 nos each per leg.<br>All seats shall have logo design with emblem- embroidery. Centre to centre of chairs shall be 56 cm. The overall height of the chair shall be 110 cm according to the level of vision at site.(As per drawings and as directed by Engineer in charge)

od256361/2022_2023 : Supplying fabricating and installation of Theater Chair having double colours red and black Type II Chairs (Chairs for other rows) complete <br>BACK FRAME: 780mm x 430/460mm made with 20 x 20mm 16 swg Sq. tube- PU injection moulded foam of 27” x 19” average 3.5” thick with head rest & lumbar support of 50-52 kg/m3 density, with back cover of injection moulded PPCP tray. Frames stripped with 22 swg CR sheet in suitable spacing and shape to support PU foam and all metal portion powder coated.<br>SEAT FRAME: 460 x 430 mm made with 25mm x 25mm sq. pipe of 18 swg PU injection moulded foam of 19” x 19” average 4”-4.5” thick of 55-58 kg/m3 density, bottom side covered with and frames stripped with 22 swg sheet in suitable spacing and topped with 3mm hard board to support PU foams and all metal portions powder coated.<br>SIDE STAND:550mm x 400 mm or nearest size made of 40mm x 20 mm 18 swg tube and 40mm x 6mm MS flat to meet the structural requirements and side covered with 5mm thick fabric upholstery board. For all inside legs made up to half portion and every end row leg should be completely covered with the fabric upholstery board and side stand powder coated.<br>ARM REST:450mm x 55mm x 50mm or nearest size made up of injection moulded PPCP (Poly Propylene Co Polymer) with cup holder with PU moulded foam padding with fabric upholstery.<br>MECHANISM: Roller and box type, roller of 14mm nylon casted metal roller and box 2 nos. made fabricated with 50mm x 3mm thick flats, 25mm x 25mm-18 swg pipe 2 stays, provided with hydraulic gas springs/coil springs(optional) and of enamel paint finished or lacquer paint finished.<br>UPHOLSTERY:3mm foam laminated fabric of approved shade of red and black special cloth made for theatre seating. (water repellent & fire retardant optional)<br>FOUNDATION BOLT:90 x 8mm, chemical bonding with 2 nos each per leg.<br>All seats can provide logo design with emblem-embroidery. (optional)Centre to centre of chairs will be 56- 58cm(customised).The overall height of the chair should be 106-110cm according to the level of vision at site. (As per drawings and as directed by Engineer in charge)

od264132/2022_2023 : Supplying fabricating and installation of motorised recliner chair for rest room complete<br>BACK FRAME: 840mm x 530mm made with 25 x 25mm 18 swg tube, PU foam of 20mm topped over frame and upholstery filled with recron fibre of virgin conjugated hollow siliconized polyester fibre 15DN x 64mm cut length of average 5” thick with head rest & lumbar support with upholstery back covering. Back Frames stripped with coil springs 3 numbers and elastic belts in suitable spacing and shape to support the upholstery and all metal portions powder coated.<br><br>SEAT FRAME: 560mm x 550mm made with 25mm x 25mm pipe of 18swg PU foam of average 65 mm thick of 32kg/m3 density and upholstery filled with recron fibre of virgin conjugated hollow siliconized polyester fibre 15DN x 64mm cut length and frames stripped with coil springs 4 numbers and elastic belts in suitable spacing and shape to support the upholstery and all metal portions powder coated.<br><br>SIDE STAND:880mm x 585mm made of 100mm x 25mm & 25mm X 25mm 18 swg tubes and 6mm MS flat to meet the structural requirements and side covered with 5mm thick fabric upholstery board. For all inside legs up to half portion and every end row leg should be completely covered with the fabric upholstery board, cup holder and all metal parts powder coated.<br><br>MECHANISM: Imported motorised recliner mechanism supported by Okin Delta Drive heavy duty actuators with 5A power supply requirement. Mechanism mounted on a foundation base of 610mm x 760mm metal frame for additional support. Back inclination can be adjusted as per eye of vision requirement.<br>UPHOLSTERY:3mm foam laminated fabric of approved shade of special cloth made for theatre seating. (water repellent optional)<br> NOTE: All seats can provide logo design with emblem-embroidery.<br><br>2) Centre to centre of chairs will be 70 cm and side stand of 15 cm extra.<br><br>3) The overall height of the chair should be 105-110 cm. (As per drawings and as directed by Engineer in charge)

od256362/2022_2023 : Supplying and installation of AIOTA, IAQ, Green Pro and BIFMA certified Mid Back Chair.<br>SEAT/BACK ASSEMBLY: The seat. is made up of 1.2 + 0.1cm thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D) & BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M) HIGH RESILIENCE (HR) POLYURETHANE FOAM. The HR poly methane seat foam is moulded with density 45+/-2 kg/m" and hardness 16 + 2 kgf as per IS:7888 for 25% compression.<br>ARMRESTS :FRONT PIVOT SYNCHRO<br>MECHANISM: The adjustable tilting mechanism is designed with the following features.<br>• 360° revolving type, • Single point control, • Front-pivot for tilt with feet resting on ground ensuring more comfort, • Tilt tension adjustment, • 4-position locking with anti shock feature<br>- Midback Chair for Mini conference hall. Approved Make Godrej Interio / Haworth / Hermen Miller.

od256363/2022_2023 : Supplying fabricating and installation of Teak wood upholstered chairs for the dias with overall dimension 590 x 590 x 1050 mm (As per drawings and as directed by Engineer in charge)

Bidder Name

Jasos Traders