Loading
Loading…
Loading…
Tender Value
₹20.9 L
EMD Value
₹38,820
Closing Date
15 Jun 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Kangra
Laying, Jointing and Testing of Distribution system 25mm Dia 5520 Rmts, 65mm Dia 5800 Rmts and Dismentalling, Relaying of GI Pipe 50mm Dia and 80mm Dia at differents RDs
2026_HPIPH_135843_1
EE/JSDK/NIT/2026-2271-2320 dt.05.06.2026
Open Tender
Civil Works
Item Rate
90 days
Kangra
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹38,820
16 Jun 2026
5 Jun 2026
15 Jun 2026
5 Jun 2026
15 Jun 2026
5 Jun 2026
5 Jun 2026 - 15 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations,trenches etc in earth work in all kind of soil, such as pick work, jumper work, blasting hard or soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water with in all heights, stacking the excavated soil within all leads clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetres) layers, when required into plinths, of foundations etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth, as per the direction of Engineer-in-Charge with in all leads and lifts. | 4,122.25 | Cum | - | - |
| 2Dismentalling of galvanised mild steel tube and tube i/c joints (cost of excavation is to be measured and paid for separately) complete in all respect of following nominal bore within all leads & lifts. | |||||
| 2.01 | 50mm dia (L) | 350 | Rmts | - | - |
| 2.02 | 80mm Dia (L) | 1,500 | Rmts | - | - |
| 3Re-laying, jointing & testing of screw and socket Galvanised Mild steel tube of Light grade of approved make or approved rate contract of DGS & D/HP Government confirming to BIS 1239-1990 (Part-II) of following diameter including all tube fitting are required complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads & lifts. (Cost of excavation earth work with be measured and paid separately.) | |||||
| 3.01 | 50mm dia (L) | 210 | Rmts. | - | - |
| 3.02 | 80mm Dia (L) | 900 | Rmts. | - | - |
| 4Laying, jointing & testing of screw and socket Galvanised Mild steel tube of Light grade of approved make or approved rate contract of DGS & D/HP Government confirming to BIS 1239-1990 (Part-II) of following diameter including all tube fitting are required complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads & lifts (Cost of excavation earth work with be measured and paid separately.) | |||||
| 4.01 | 25mm Dia (L) | 5,520 | Rmts. | - | - |
| 4.02 | 65mm Dia (L) | 5,800 | Rmts. | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.28 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.15 MB
Form6and8.pdf
Tender Documents • 0.71 MB
Termsandcondition.pdf
Tender Documents • 0.21 MB
BOQ_201132.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .