ELECTRICAL WORK

Supply of the following sizes of Armoured Aluminium cables In trenches, GI pipes, Hume pipes, cable trays, building surface etc. as per specification. (POLY CAB, FINOLEX,HAVELLS,RR CABLE,UNIVERSAL CABLE) 3 x 6 Sq mm

Supply of suitable size cable gland and sockets for end termination of following size of aluminium Cables (Any reputed make) 3 x 6 Sq mm

Supply of following sizes of Armoured copper cables in trenches, Gl pipes, Hume pipes, cable trays, building surfaces etc. As per specification. (POLY CAB, FINOLEX, HAVELLS ,RR CABLE, UNIVERSAL CABLE) 2 x 1.5 Sqmm

3x1.5 Sqmm

4x1.5 Sqmm

24x1.5sqmm

Supply of suitable size Cable gland and sockets for End termination of the following sizes of Armoured copper cables 2 x 1.5 Sqmm

3 x 1.5 Sqmm

4x1.5 Sqmm

24x1.5sqmm

Supply of 10 SWG copper wire

Supply of MS junction box of size 24”x12”x4”

Supply of MS junction boxes of size 4”x4”

Supply of 2pair 0.5sqmmfoil tape shielded, braded, tinned copper shield and outer PVC insulated copper wire(POLY CAB,FINOLEX, NISHACABLES, RRCABLES,VARSHA CABLE)

Supply of 30 Amps 3 phase metal clad plug &socket with 30 Amps TP MCB in suitable enclosure(ACE ELECTRICALS,MAHAVIR ENTERPRISES,RIAN ENTERPRISES)

Supply of DOL starter unit complete suitable for mounting in existing LT panel for 3 HP motor(L&T make)MNX 9

Supply of 63 Amps switch Fuse unit ,TPN with handle (L &T make) suitable for mounting existing LT panel.

Supply of DOL starter unit complete in suitable for mounting in existing LT panel for 5 HP motor(L&T make) MNX12

Supply of 6 to 10 A L& T make MN-2 Over Load Relay suitable for fixing existing LT panel for 5 Hp Motor

Supply of MS items for cable tray, racks etc (TATA,JINDAL)

Supply of 20 mm PVC conduit and required no of bend, elbow, saddle clips and nails for laying load cell cable. (FINOLEX,SUPREM,PRINCE)

Supply of 2.5 Sq mm PVC insulated copper wire POLY CAB,FINOLEX, NISHACABLES, Rr CABLES,VARSHA CABLE

Supply of 20 MM flexible PVC Conduit FINOLEX,SUPREM,PRINCE

Supply of 3.7 KW VFD,430 VOLT,3 PHASE, 50 HZ DANFOSS,SIEMONS,ABB

Supply of Truman level sensor TWO WIRE ADMITENCE TYPE (probe length 90 cm) LEVEL TRANSMITER

Supply of Truman level sensor TWO WIRE ADMITENCE TYPE (probe length 30 cm) LEVEL TRANSMITER

Supply of Truman level. TWO WIRE ADMITENCE TYPE (probe length30 cm) LEVEL TRANSMITER

Supply of 4 c x 1.5sq mm armoured sheathed copper cable for level sensor s

Description of Work / Item(s)

Laying of the following sizes of Armoured Aluminium cable in trenches, GI pipes, Hume pipes, cable trays, building surface etc. as per specification. 3 x 6 Sq mm

End termination of the following sizes of armoured Al cables with suitable cable glands & sockets 3 x 6 Sq mm

Laying of following sizes of armoured copper cables in trenches, GI pipes, Hume pipes, cable trays, building surface etc. as per specification. 2 x 1.5 Sqmm

3x1.5 Sqmm

4x1.5 Sqmm

24x1.5sqmm

End termination of the following sizes of armoured copper cables with suitable cable glands & sockets 2 x 1.5 Sqmm

3x1.5 Sqmm

4x1.5 Sqmm

24x1.5sqmm

Laying of 10 SWG copper wire with suitable leg

Laying and connection of flexible PVC pipe with 1 run of 3 x 2.5 sqmm flexible copper wire for motors and 1run of 2x2.5 sq.mm flexible copper wire for earth connection (from isolator to the motor)

Installation of MS junction boxes of size 4”x4”

Installation of MS junction box of size 24”x12”x4”

Installation of 30Amps 3 phase metal clad plug & socket with 30 Amps TP MCB in suitable enclosure.

Installation of DOL starter (L&T MNX12)unit complete in suitable enclosure for 5 HP motor

Laying of 2 pair 0.5 sqmm foil tape shielded, braded ,tinned copper shield and outer PVC insulated copper wire by using 20mm PVC Conduit (For Load cell connection) building surface, Plant structural, cable tray etc. as per specification

Installation of 30 Amps 3 phase metal clad plug &socket with 30 Amps TP MCB in suitable enclosure

Installation of L&T make MNX 9 DOL starter unit complete in the existing LT panel for 3 HP motor.

Installation of 63 Amps switch Fuse with handle unit after removing damaged SFU from the panel. (L &T make) in the existing LT panel.

Installation of MNX 12 DOL starter unit complete in the existing LT panel after removing damaged contactor from the panel for 5 HP motor (L&T make)

Installation of 6 to 10 A L& T make Over Load Relay in the existing LT panel for 5 Hp Motor

Laying of MS items for cable tray, racks etc

Installation and termination of 5 KW VFD in the existing panel board with necessary wiring

Installation and termination of Truman level sensor with necessary flange on the 25 MT storage silo

Installation and termination of Truman level sensor with necessary flange on the 25 MT storage silo.

Installation and termination of Truman level sensor with necessary flange.

Laying of 4 c x 1.5sq mm armoured sheathed copper cable for level sensor s

Linsta Services

POWER LINE ENGINEERS

Linsta Services

POWER LINE ENGINEERS