BANARHAT/EO/NIT-007/2025-26 (2nd Call)/ 8

IT NO=2/A P=1 PWD SOR 2017 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required completeDepth of excavation not exceeding 1,500 mm

IT NO=13 P=46 PWDSOR2017 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

IT NO -10/II P=26 PWD SOR(BUILDING) 2017 Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.

IT NO -10/II P=26 PWD SOR(BUILDING) 2017 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.River Bazree

IT NO -16 P=16 PWD SOR(BUILDING) 2017 125mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor

IT NO -40/AP=44 PWD SOR(BUILDING) 2017 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and directiona) For works in foundation and upto roof of ground floor/upto 4 mSAIL/ TATA/RINL

IT NO -36/AP=42 PWD SOR(BUILDING) 2017 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

IT NO -1/II/BP=189PWD SOR(BUILDING) 2017 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).With 1:4 cement mortar15 mm thick plaster

Supplying fitting and fixing door with wooden frame and plain sheet fixed up and all necessary materials required including necessary fitting and fixing at work site.

IT NO -15/IIIBP=197PWD SOR(BUILDING) 2017 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specificationTwo coats.

IT NO -1/AP=200PWD SOR(BUILDING) 2017 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

IT NO -1/AP=200PWD SOR(BUILDING) 2017 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface

IT NO 6/A P=37 PWD SOR S&PLUMB Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer250 litre capacit

IT NO=10P=37 pwd sor p&s Labour for punching hole in plastic water storage tank upto 50 mm diaUpto 1500 litre capacity

IT NO=7/F P=6 P&S Supplying, fitting and fixing bib cock or stop cockPolythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent15 mm

IT NO=4 P=79 PWD S&P Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing580 mm X 440 mm

IT NO=19(III)P=13 PWD SOR P&S Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 15 MM DIA PIPE

IT NO=14/III P=66 PWD SOR P&S Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately) P TRAP 100 MM

IT NO=1/1 P=49 PWD S&PL Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore40 mm dia. boring etc

IT NO=5/1P=52 PWD SOR S&PL Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications40 mm dia

IT NO=9/1P=52 PWD SOR S&PL Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets40 mm dia

IT NO=10/I P=53 PWD SOR 2017 S&PL Supplying, fitting and fixing plug of approved make conforming to I.S. specifications 40 mm

IT NO=11/V P=53 PWD SOR 2017 S&PL Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm 40 mm

IT NO=14/AP=54 PWD SOR S&PL 2017 Supplying, fitting and fixing popular Maya pump no-6 or similar. (i) For 40 mm dia. tube well

IT NO=1/E/V P=102 PWD SOR S&PL 2017 Supply Oof G.I. Pipes of TATA 40 mm dia(i) Light quality including necessary socket.

Add:- GST @ 18%

Add:- Labour CESS@ 1%