PROVISION OF BOAT YARD AT KATARIBAGH AND STEEL WIRE FABRIC MESH OVER STATIC TANK AT ND SCHOOL NAVAL BASE KOCHI

Amount

Surface Dressing not exceeding 15cm deep in soft/ loose soil, complete all as specified and as directed by Engineer in Charge.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. and getting out in soft /loose soil, complete all as specified and directed.

M&L for Plain Cement Concrete 1:4:8, Type D-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed by Engineer in Charge.

M&L for Precast Cement Concrete Block Masonry with solid blocks exceeding 10cm in width 1:3:6, Type C-1 (using 20mm graded stone aggregate) and setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Plain Cement Concrete 1:2:4, Type B0, using 12.5mm graded stone aggregate as in DPC, including necessary form work, complete all as specified and as directed.

M&L for Plain Cement Concrete 1:3:6, Type C-1, using 20mm graded stone aggregate as in Surface channels and drains, including necessary formwork, complete all as specified and as directed.

M&L for Plain Cement Concrete 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in coping, bed plates and chamfered angles and throating etc., including necessary form work, complete all as specified and as directed.

M&L for Random Rubble Walling, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6, as in parapet, steps etc., complete all as specified and as directed by Engineer in Charge.

M&L for Random Rubble Walling, laid dry, uncoursed, well bonded as in retaining walls, abutments and similar works, complete all as specified and directed.

M&L for raised pointing 15mm x 8mm to Random Rubble stone walling in Cement Mortar 1:3, uncoursed or brought upto course, complete all as specified and as directed.

M&L for rendering 10 mm thick on fair face of brick work or concrete surface, in Cement Mortar 1:6, finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

M&L for rendering 8mm thick in Cement Mortar 1:4 with approved water proofing compound over backing coat of 12 mm thick in Cement Mortar 1:6, using liquid Water Proofing Compound on fair faces of brick work or concrete surfaces, finishing the surface even and smooth with out using extra cement, complete all as specified and directed.

Supply only Liquid Water Proofing Compound, 3% by weight of cement, complete all as specified and as directed by Engineer in Charge.

M&L for Shingle filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled, watered and binded with earth and rammed, all as specified and directed by Engineer in Charge.

M&L for Hard-core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, Type C-2, using 40 mm graded stone aggregates as in floors to receive top layer, complete all as specified and as directed.

M&L 50 mm thick Plain Cement Concrete 1:2:4, Type B-1, using 20mm graded stone aggregates as in floor, finished even and smooth with out using extra cement, complete all as specified and directed.

M&L for preparing new wall surfaces and applying three coats of white wash, complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium Acrylic Emulsion Paint over new surfaces of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali, fungal and dirt resistant, over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm, complete all as specified and directed.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, Type C-1, using 20mm graded stone aggregate, as in plinth protection, finished even and smooth without using extra cement, complete all as specified and directed. Note : PCC shall be laid in alternate panels not exceeding 2Sqm.

Forming Contraction (Dummy) Joints 75mm deep x 10mm wide, filled with Sealing Compound Grade A, complete all as specified and directed by Engineer in Charge.

M&L for reinforced cement concrete 1:2:4, Type B-1 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all as specified and as directed.

M & L for reinforced cement concrete 1:2:4, Type B-1 (20mm graded aggregate) in columns, piers, pillars and struts etc.; complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns etc. all as specified and directed.

Mild steel TMT bars, 10mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165), complete all as specified and as directed.

M&L for TMT bars 5mm dia. and over and including 10mm dia., in stirrups, spacers and binders etc., cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips, complete all as specified and directed.

M&L for TMT bars, 6 to 8mm dia. and over in reinforcements, including cut to length, bend to required shape, cranking/ hooking ends if necessary and binding with 0.9mm dia. MS wire annealed or welding so as to secure the bar firmly in position/ required shape complete all as specified and as directed by Engineer in Charge.

M&L for Wall Cladding/ Elevation Tiles, 300 mm x 600 mm x 10mm thick with stone finish of approved design, set and jointed in neat cement slurry @ 3Kg per Sqm and pointed in white or coloured cement to match with the shade of tiles over and including 10mm thick cement mortar 1:4 backing complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) in 12mm thick Cement Mortar 1:3 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Rounding to edges of stone slabs, one edge of any situations, complete all as specified and as directed by Engineer in Charge.

S&F Roof Truss (Framed) conforming to Fe -410W (Gde E-250), Quality-A, as in trusses, purlins, crane gantries, rails & fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engineer in Charge.

S&F Framed work conforming to Fe 410-W (Gde-E- 250) Quality-A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coverings, doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed by Engineer in Charge.

S&F Rolled Sections conforming to Fe 410-W (Gde-E-250), Quality-A, as in framing for cladding, glazing and the like, fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

S&F Pre-painted galvalume zinc coating GI based corrugated steel sheet, 0.50 mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F Pre-painted galvalume zinc coating GI based plain steel sheet, 0.50 mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F 1mm thick Mild Steel, Plain, Black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required, complete all as specified and as directed.

M&L for 300mm long Mild Steel Sliding Door Bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia. with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed.

S&F Mild Steel Butt Hinges of size 125mm, heavy weight, cold rolled, complete all as specified and as directed.

S&F Hard drawn welded steel wire fabric not exceeding 4kg/Sqm, in available size, as in steel framed work, complete all as specified and as directed.

M&L for preparing new steel surfaces and applying two coats of Anti-Corrosive Paint over a coat of appropriate primer, complete all as specified and as directed.

M&L for 75 mm thick Plain Cement Concrete 1:4:8, Type D-2 using 40 mm graded stone aggregate as in sub base to floor, complete all as specified and directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm, spreading, levelling and ramming in layers not exceeding 25cm thick and well ramming, including watering as required, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver blocks of white/ grey cement and pigment, any shape and size, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including necessary polishing all as specified and directed.

M&L Plain Cement Concrete 1:2:4, Type B-1, using 20mm graded stone aggregate for concreting around the Machine pressed Precast Concrete Paver blocks and chamfering the edges, including necessary form work, complete all as specified and as directed.

M&L for 7 to 8 mm thick coloured Non-Skid Ceramic Tiles (Square/ Rectangular) in floors, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Glazed Ceramic coloured tiles in vertical surfaces, 350mm x 450mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and directed.

M&L for Swimming Pool Tiles of size 247mm x 122mm x 8mm, as in wall / floor etc., set and jointed in neat cement slurry and pointed with white cement including 10mm thick backing /screed in Cement Mortar 1:4, as per manufactures instruction, complete all as specified and as directed by Engineer in Charge.

Supply and fixing Vitreous China Wash Hand Basin of size 580mm x 450mm, White, flat back, excluding taps, waste chain and plug and porcelain stopper but including 32 mm dia. brass chromium plated waste fittings with long screwed shank and fly nuts, cast iron brackets, cutting for and pinning in as required, complete all as specified and directed.

S&F 15 mm bore Fancy type Cast Copper alloy chromium plated Pillar taps, with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed.

Supply and fixing 100 mm dia. PTMT Grating with minimum weight 25 gms., having provision to receive the waste water pipe and fixed with white cement alround, complete all as specified and directed.

M&L for 75mm bore PVC (SWR) Floor Trap, plain with grating, including jointing with solvent cement, complete all as specified and directed.

S&F 75mm dia. PVC (SWR) Pipes, single socketed, in any length with rubber ring joints, laid in trenches/ floor or fixed to wall including necessary clamps and iron brackets for fixing, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed by Engineer in Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door shutter 30mm thick (Style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and fixing in the frame at site complete all as per specification & drawings and as directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 150 mm size extruded, anodised aluminium alloy handles, fabricated type, complete all as specified and directed.

Supply and fixing 100mm size Stainless Steel butt hinges, medium weight, complete all as specified and directed.

S&F Vitreous China Wash down Water Closet, pedestal pattern, white, including fixing with trap, fixing bolts and connecting to flush pipe and soil pipe, and removing the old one, complete all as specified and directed.

Supply and Fixing Plastic Water Closet Seat, white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F PVC valveless, Syphonic Action Type Flushing Cistern, 10 Litres capacity, low level, white, with inlet, ball valve, float and handle including fixing of brackets, connection to WC with CI brackets and making good disturbed area, complete all as specified and directed.

Supply and fixing On site LLDPE Septic Tank for 10 users, with Upflow Filter including media, designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8 below foundation, Vent Shaft, Connection etc., complete all as specified and as directed by Engineer in Charge.

S&F 150mm dia. PVC (SWR) Pipes, single socketed, in any length with rubber ring joints, laid in trenches/ floor or fixed to wall including necessary clamps and iron brackets for fixing, complete all as specified and directed.

M&L for Concrete Bed in Plain Cement Concrete 1:3:6, Type C-2, to drain pipes of 150mm internal dia., including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L Precast Cement Concrete 1:2:4, Type B-1, using 20mm graded crushed stone aggregate, as in landings, man hole cover slab, chajjas etc., and similar articles with plain faces set in Cement Mortar 1:6, complete all as specified and directed.

Supply & fixing MS Galvanised PVC coated Chain link Fencing of grid size 50mm x 50mm x 4mm dia. wire (Weight not less than 3.25 Kg/Sqm) including supply and binding with GI binding wire, complete all as specified and as directed by Engineer in Charge. Make : M/s A1 Fence Products Company Limited or any other manufacturer as approved by GE.

S&F MS Posts and Struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. including all necessary drilling, bolting or riveting works etc. and similar works, complete all as specified and directed by Engineer in Charge.

S&F MS Flat Iron (40mm x 6mm) as in fencing posts for securing post with fencing wire mesh including drilling, bolting with required nuts & bolts and welding with Flat Iron of required length conforming to Fe-410-0 or Fe-310-0 including MS Nuts and Bolts, complete all as specified and directed.

Mild Steel round bars 10 mm dia. and over, conforming to Fe-410-W (Gde.E-250), Quality-A or Fe 290 (Gde - E-165) round bars, cut to length, bent to required shape, including cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia. or securing with clips, complete all as specified and directed.

Returning filling in, including spreading levelling watering and well ramming in layers not exceeding 15cm thick complete all as specified and directed.

Removing excavated material exceeding 1.5Km but not exceeding 5Km and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

Supply and fixing Stainless Steel Bollard of Grade-316, 168mm dia., 1.20m in length (900mm above ground level and 300mm below ground level) and thickness of pole 5mm, including all fitting arrangements and fixed in ground, complete all as specified and as directed. Make : EURONICS Model No. SSB01L or equivalent approved make.

Material & Labour for providing and fixing of Stainless Steel Railing (Grade 316) and of thickness 2mm or more, made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangements, complete all as specified and directed.

M&L for point wiring for one light/ fan point with 1.5 Sqmm PVC insulated, unsheathed, FRLS multistranded single core copper conductor cable, 1100 Volts Grade controlled by one Way Switch including 1.5 Sqmm PVC (FRLSH) insulated, unsheathed, copper cable multistrand conductor, 1100 Volts Grade for continuity conductor including connecting to common earth dolly, drawn through and including rigid PVC Conduit (Concealed/ Surface), medium grade, ISI marked, of suitable size with all accessories and Sunken Box of 1.6 mm thick Pressed Steel Box, factory made for mounting of switch, socket and fan regulator, including chase cutting and making good to the disturbed surface and matching to the existing finish specifications, complete all as specified and as directed by the Engineer in Charge.

All as per Item No. 75 here in before, but for One 5 Pin, 5 Amp socket outlet point on independent board, complete all as specified and as directed.

All as per Item No. 75 here in before, but using 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor cables including 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor cable as earth continuity wire and connecting to common earth dolly for One 6 Pin, 15 Amp Socket outlet point on independent board, complete all as specified and directed.

M&L for sub main wiring with 2 runs 6 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLSH cable, 1100 Volt grade drawn through PVC rigid conduit with all accessories on surface, including necessary PVC conduit specials including chases cutting, complete except beam and RCC roof and one run of 6Sqmm PVC insulated, unsheathed, single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble and making good the disturbed surface to match with the existing surface, complete all as specified and as directed. Note : Two run of 6 Sqmm size PVC Copper cable, one run of 6 Sqmm size PVC Copper cable as earth wire and one run of PVC conduit shall be measured as one unit length

S&F Piano Flush type Switch, single pole, one way, 5 Amp, complete all as specified and as directed.

S&F Switch Socket combination, 5 Amps, 5 Pin, 2 in 1, complete all as specified and as directed.

S&F Multipurpose Switch Socket combination, 5 & 15 Amps, 5 Pin, 2 in 1, complete all as specified and as directed.

Supply and fixing Ceiling Rose, surface bakelite, 65 x 50mm, 3 terminals, complete all as specified and as directed.

S&F Sheet Metal Enclosure for MCB SPN DB, 8 way, Double Door (Metal Door) IP-43 type, suitable for 200 Amp, 240 Volts, 50 Hz. including all electrical connections, all as specified and as directed.

Supply and fixing Amp rating 240V, 10KA 'C' Curve Miniature Circuit Breaker (MCB) of current carrying capacity SP 5 to 32 Amps in the MCB DB, including connecting, testing and commissioning complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' Curve Miniature Circuit Breaker (MCB) of single pole and current carrying capacity 5 to 32 Amps in the MCB DBC including connecting, testing and commissioning complete all as specified and directed.

Supply and fixing LED light fitting 1x 20Watt, 220V, AC decorative box type with driver, holder, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing LED light fitting, mirror type with high out put diffuser, 2 feet, 10 Watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing Ceiling Fan with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with Brushless Direct Current Motor (BLDC), complete all as specified and directed.

Supply and fixing Exhaust Fan, steel body, AC Single Phase, 230V of size 300m sweep with blades, frame and louvers, complete all as specified and directed.

Supply and fixing Exhaust Fan, steel body, AC Single Phase, 230V of size 300m sweep with blades, frame and louvers, complete all as specified and directed.

Supply and fixing on wall/ ceiling/ floor/ concealed on wall, 25mm dia. High pressure CPVC pipes SDR-11 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC

Supply and fixing on wall/ ceiling/ floor/ concealed on wall, 20mm dia. High pressure CPVC pipes SDR-11 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC

Supply and fixing 15mm size Chromium Plated fancy type Bib Taps, quarter turn with flange and aerator, long body, cast copper alloy with crutch or butterfly handle, screwed for GI/ CPVC pipe, complete all as specified and as directed by the Engineer in Charge. Make : CERA/ Prayag/ Hindware/ Jaguar

Supply and fixing 20mm size Chromium Plated cast copper alloy, fancy type, quarter turn Concealed/ Surface Stop Cock, with CP cup and adjustable wall flange, complete all as specified and as directed by the Engineer in Charge. Make : CERA/ Prayag/ Jaguar/ Hind ware

Supply and fixing 450mm long, 15mm dia. PVC Connection with brass union on both sides to suit 15mm GI pipe, complete all as specified and directed by the Engineer in Charge.

Supply and fixing 15mm bore Chromium Plated fancy type, cast copper alloy Pillar Taps, quarter turn with aerator, with capstan heads, screwed down, high pressure with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nuts screwed for iron pipe and fixed, complete all as specified and directed by the Engineer in Charge. Make : CERA/ Prayag/ Hind ware/ Jaguar

Supply and Fixing 750 litres capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical, vertical with closed top), hoisted & fixed in position, complete all as specified and as directed. Make : Sintex (ISI)/ Aquatech

S&F 25mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC

S&F 20mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC

S&F 25 mm dia. Synthetic (PVC) Float Valve, high pressure, with polythene ball of size 6" dia. and flynut, complete all as specified and directed.

Supply and fixing 15mm size Chromium Plated cast copper alloy Angle Valve, half turn with flange, for fixing with CPVC pipe, complete all as specified and as directed by the Engineer in Charge. Make : CERA Model No. F 2004201 or equivalent in Prayag/ Hind ware/ Jaguar

Supply and fixing 15mm size Chromium Plated cast copper alloy Two way Bib Cock, quarter turn with flange and aerator, complete all as specified and as directed by the Engineer in Charge. Make : CERA Model No. F 2004163 or equivalent in Prayag/ Hind ware/ Jaguar

Supply and fixing 15mm size Swivel Overhead Shower (minimum weight 40 grams) of PTMT, any colour with shower arm (minimum weight 40 grams) 195mm long with bend of 45 degree with flange, fixing with CPVC Pipe, complete all as specified and as directed by the Engineer in Charge. Make : CERA Model No. F 7020104 or equivalent in Prayag/ Hind ware/ Jaguar

Supply and fixed in repairs, Health Faucet, ABS body with wall hook and one metre SS braided rubber hose pipe, complete all as per specified and directed. Make : CERA Model No. F 8030102 or equivalent in Prayag/ Hind ware/ Jaguar

Supply and laying UG Cable in trenches/ passing through pipes/ fixed on wall or pole cable, XLPE insulated, screened, PVC bedded, steel trip or wire armoured electric power cable (Heavy Duty) 1100 Volts Grade, with stranded aluminium conductor of size 16 Sqmm 4 core with suitable gland, complete all as specified and directed.

Supply and laying UG Cable in trenches/ passing through pipes/ fixed on wall or pole cable, XLPE insulated, screened, PVC bedded, steel trip or wire armoured electric power cable (Heavy Duty) 1100 Volts Grade, with stranded aluminium conductor of size 10 Sqmm 2 core with suitable gland, complete all as specified and directed.

Material and labour for filling dry Sand River cushioning and covering of Under Ground cables in trenches for cable protection all as specified and directed. Note : For measurement purpose, only punned thickness shall be measured and paid.

Supply and laying common burnt clay building bricks, Subclass 'B' designation of size 230mm x 115mm x 75mm, laid dry and abutting each other with gap between adjacent brick, not exceeding 10mm over underground cable for cable protection in trenches, all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

Supply and laying 25mm bore GI Tubing, medium grade, in trenches/ fixed to wall or pole, with all fittings, complete all as specified and directed.

Supply and fixing MCCB, 4 Pole 63 Amps, with breaking capacity of 25 kA, complete all as specified and directed. Make : Indo Asian/ Havells/ L&T

Supply and fixing Sheet Metal Enclosure, suitable for 4 Pole 63 Amps MCCB, 240 Volts, complete all as specified and directed by Engineer in Charge. Make : Indo Asian/ Havells/ Legrand

Supply and fixing hot dipped GI Octagonal Pole, 6m long with one metre arm suitable for mounting of 01 No. of LED Street light, with base plate and GI foundation nut and bolts, complete all as specified and directed by Engineer in Charge. Note: Pole shall be made out of hot dipped galvanised iron (ASTM A123 with minimum average GI coating if minimum 65 µm and minimum thickness of 3mm, which should be tapered towards top, base dia of pole shall be minimum 155mm and top dia. shall be minimum 70mm. The total height of the pole should be 6000mm above the finished Ground level. The quoted rate shall be inclusive of PCC foundation, J-bolt, nuts and washers as per Manufacturer's instruction.

Supply and fixing LED Street light 60Watt, with aluminium housing, heat resistant, toughened glass frame & IP 66 protection, all as specified and directed. Make : Crompton/ Luker/ Havells/ Philips/ Bajaj

Cutting existing Rigid/ Flexible road/ hard standing of any type by using crow bar chisel etc. not exceeding 45 cm wide not exceeding 30cm depth, including making good the disturbed surface by returning filling, watering, ramming in layers, 150 mm thick PCC 1:4:8, Type D-2 using 40mm graded stone aggregate, disposal of surplus material to a distance not exceeding 50m, complete all as specified and directed by Engineer in Charge.

M&L for preparing new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic Enamel Paint over a coat of red oxide primer, complete all as specified and as directed by Engineer in Charge.

S&F mild steel Framed Work as in grills, gratings etc., with ends of bars shouldered and/or riveted or forged into spikes, in work such as framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings, framework of water tanks and similar works conforming to Fe-410-0 or Fe 310-0, complete all as specified and directed.

S&F Welded steel wire fabric not exceeding 4kg/Sqm, in available size, fixed to steel members, complete all as specified and as directed.

Albert Rebello and Company

ANIE JOHN CONTRACTORS