8577/E8

Amount

Demolition of cement concrete in ground floor and paving nexc 15 cm thick (below or above ground level) all as specifed and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons.laid, bedded and pointed in any mortar all as specified and directed.

Demolition of cement concrete block/ random rubble/brick masonary in cement mortar including all quoins arches pillars all as specifed and directed.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water all as specifed and directed.

Raking out joints/ pointing in walls for random rubble or polygonal rubble uncoursed or brought up to courses masonary built in cement or cement lime mortar all as specified and directed.

Dismantling plain/corrugated steel sheeting any gauage thick ness including Nainital and similar pattern all as specifed and directed.

Dismantling of ceiling board /wall panelling of any thickness and of any description including cover fillets all as specifed and directed.

Dismantling of frame work timber in scantling 40 sq cm and over in section in any position all as specifed and directed.

Dismantling of timber fillets under 40 sqcm in section all as specifed and directed.

Taking down chowkats or frames with shutters (with out taking off shutter from the frame) area exc 1.5 sqm but nexc 4sqm each all as specifed and directed.

Taking down chowkats or frames with shutters (with out taking off shutter from the frame) area exc 1.5 sqm each all as specifed and directed.

Taking down shutter area exc 1 sqm and nexc 2 sqm each all as specifed and directed.

Taking down shutter nexc 1 sqm each all as specifed and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specifed and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specifed and directed.

Dismantling water tank and removing to store exc 250 but nexc 500 litres capacity all as specifed and directed.

Dismantling water tank and removing to store exc 500 but nexc 1000 litres capacity all as specifed and directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of 25 mm thick as in leveling course, finished surfaces even and rough to receive floor finish all as specifed and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L Non skid ceramic coloured tiles (300x300)x7 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 laying floor finish all as specifed and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including laid over screed bed or bedding layer of motar 15 mm thick in cement mortar 1:6 laying floor finish all as specifed and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting fixed over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles all as specifed and directed.

M&L vtrified coloured tiles (600x600)x9/10mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15 mm thick in cement mortor 1:6 for laying floor finish all as specifed and directed.

M&L vitrified coloured tiles (600x600)x9/10mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles all as specifed and directed.

M&L glazed ceramic coloured tiles of size (300x200) x7mm thick laid over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles all as specifed and directed.

M&L glazed coloured ceramic tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick laid over over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles all as specifed and directed.

M&L machine cut kota stone slab flooring 20-25mm thick laid over and including 20 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in floor, finishing cement concrete surface even and smooth with out using extra cement all as specified and directed.

S&F glass dividing strips 3 mm thick and 38 mm wide and inserted in position to confirm design all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1, (using 20 mm graded crushed stone aggregate), finishing cement concrete surface even and smooth without using extra cement as in plinth protection all as specified and directed.

M&L prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floor with grey cement and pigment and including laid over screed bed or bedding layer of mortar 20 mm thick in cement mortor 1:6 for laying floor finish all as specified and directed.

M&L pre-cast cement concrete block masonary in PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) with solid block exc 10 cm in width and setting in CM 1:6 all as specifed and directed.

All as per item No.33 here- in before but except blocks all as specifed and directed.

M&L walling of random rubble stone masonry uncoarsed, well bonded, bedded and solidly hearted built in CM 1:6 all as specifed and directed.

All as per item No 35 here in before but except stone all as specifed and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface nexc 20mm to face stone and dressing of face beds and joints on random rubble walling, uncoursed or brought upto courses all as specifed and directed.

M&L raised pointing in cement mortar 1:3 to randam or polygonal rubble masonry uncoursed or brought upto courses all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including form work all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:6 or fair faces of brick or cement concrete surfaces, for even and fair surfaces all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick or cement concrete surfaces, finished surfaces even and smooth without using extra cement all as specifed and directed.

M&L for providing and applying plaster of paris putty 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of suitable primer all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coat of white wash all as specifed and directed.

S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side all as specified and directed.

M&L 30mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass gauge, etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR part I section 8 clause 20 (b) of windows, ventilator all as specifed and directed.

S&F 35mm thick IInd class hard wood glazed and skelton shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash barsi) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) all as specified and directed.

S&F solid PVC door frame of size 50X47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube and fixing in opening all as specified and directed .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail, paneling of plain clour PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with suitable PVC sheet beading, and jointing together with solvent cement, supplying & fixing in the frame at site as per specification all as specified and directed.

S&F bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges, clamps, hold fasts, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 all as specifed and directed.

S&F steel windows with side hung shutters including projecting box type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded all as specified and directed.

S&F steel windows with side hung shutters including projecting box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in lintel upto 1.5 m clear span, cills, steps, seismic and other similar articles, bed plate, copings & hold fast including form work etc all as specifed and directed.

S&F anodised aluminum section for making doors, windows, partition wall, shutters including styles and rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading all as specified and directed (glazing, rubber beading, hinges, etc shall be measured and paid separately)

M&L rubber beading for fixing glass panes in aluminium frame work all as specified and as directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work all as specified and directed.

S&F 4.8 mm thick tinted sheet glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, all as specified and directed.

M&L for repair of aluminium door any type inluding replcing necessary joining cleats, glazing clips, aluminium snap beading, handles, locking arrangement if any, and refixed in correct alignment all as specified and as directed. NOTE: Glazing shall be measured and paid separatly

M&L for repair of aluminium windows any type, fixed/side hung/sliding (two or three track) inluding replcing necessary joining cleats, glazing clips, aluminium snap beading, handles, locking arrangement etc. if any and refix in correct alignment all as specified and as directed. NOTE: Glazing shall be measured and paid separatly

S&F butt hinges stainless steel 100mm size all as specifed and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm all as specifed and directed.

S&F mild steel butt hinges of 75mm long each all as specifed and directed.

S&F 200 mm aluminium, anodised, barrel tower bolts of extruded section all as specified and directed.

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 150mm long anodised extruded aluminium alloy handles, fabricated type all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F in repair floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring (140mm size) all as specified and directed.

S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate mild steel all as per specified and directed.

S&F 0.56 mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple all as specifed and directed.

S&F in repair 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple all as specifed and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones all as specifed and directed.

S&F 3 mm thick sheet glass ordinary qauality and glazing with oil putty in square nexc 0.5 sqm in each pane all as specified and directed.

M&L second class hard wood, clean sawn, in scantling timber frame and fixed with nails all as specifed and directed.

All as per item No 78 here-in before but except scantling all as specifed and directed.

M&L for second class hard wood plain fillets square in section, clean sawn, secured with nails cross sectional area exc 13 but n exc 25 sqcm all as specifed and directed.

All as per item No 80 here-in before but except fillets all as per specified and directed.

M&L for second class hard wood plain fillets size square in section, clean sawn, secured with nails cross sectional area exc 03 but n exc 06 sqcm all as specifed and directed.

All as per item No 82 here-in before but except fillets all as specified and directed.

M&L preparation of wooden surfaces new or old of any description and treated with creosote oil all as specifed and directed.

M&L 6mm thick plywood grade BWP type BB fixed with nail to timber frame work in wall cladding all as specifed and directed.

M&L 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screws to timber frame work in wall cladding all as specified and directed.

M&L 6mm thick plywood grade BWP type BB fixed with nail to timber frame work in ceiling all as specifed and directed.

S&F 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes of 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed.

S&F solid PVC wall linning consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed.

M&L preparation of old decorated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on roof all as per specified and directed.

M&L preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint on roof over a coat of red oxide primer all as per specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

M&L teak wood finish french polishing on veneered surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats all as specified and directed.

M&L preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specifed and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L or J type or cranked hook bolts all as specifed and directed.

S&F 0.80 mm thick plain, galvanised mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings with grades of zinc coating 275 gms all as specifed and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with grade of zinc coating 275 gms with two corrugation side lap fixed with L or J type or cranked hook bolts in roof wall all as specifed and as directed.

All as per item No 98 here-in before but except sheet all as specifed and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mm/600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture all as specified and directed.

S&F false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid all as specified and directed.

S&F in repair for ceiling board of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid all as specified and directed.

S&F in repair for 20 mm dia chromium plated pipes for curtain rods all as specified and directed.

S&F in repair for chromium plated brackets and knobs for curtain rods all as specified and directed.

S&F 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor all as specifed and directed.

Re-fixing 15mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) all as specifed and directed.

S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor all as specifed and directed.

Re-fixing 20 mm bore old steel tubing and connection in view old position (wall, ceiling, floor, etc) all as specifed and directed.

S&F rotational moulded polyethylene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule all as specifed and directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down all as specifed and directed.

S&F PVC (SWR) bends any radius 110mm bore pipe including taking down all as specifed and directed.

S&F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor including taking down all as specifed and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S&F in repair for vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets all as specifed and directed.

S&F in repair for 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed all as specifed and directed.

S&F in repair 15mm bore dia fancy type pillar taps, cast copper alloy with capston head chromium plated screwed down high pressure with or without lettred 'hot or cold' with long screwed shanks and flynuts screwed for iron pipe all as specifed and directed.

S&F in repair 10 litres capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed all as specifed and directed.

S&F in repair for PVC connection 15mm dia and 600mm long all as specifed and directed.

S&F in repair PVC waste pipe 32mm dia all as specifed and directed.

S&F in repair soap dish acrylic type 138X102X75mm all as specifed and directed.

S&F in repair for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connectings union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm all as per specified and directed.

S&F in repair 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) all as specifed and directed.

S&F in repair for 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms ) all as specifed and directed.

S&Fin repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good complete) all as specifed and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete) all as specifed and directed.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specifed and directed.

S&F in repairs CP grating of size 100mm dia all as specifed and directed.

S&F in repair 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall all as specifed and directed.

S&F in repair 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall all as specifed and directed.

S&F in repair 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and all as specifed and directed.

S&F in repair 15mm bore chromium plated brass, fancy type angle cock screwed for iron pipe or union and fixed all as specifed and directed.

S&F in repair 15mm bore chromium plated brass, fancy type 2-in-1 angle cock screwed for iron pipe or union and fixed all as specifed and directed.

S&F in repair 15mm dia stop valves, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union all as specifed and directed.

S&F in repair 15mm dia bib taps standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90 gms) all as specified and directed.

S&F in repair 15mm dia stop cock standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90 gms) all as specified and directed.

S&F in repair CP towel rail of 20mm dia with hook 600mm long all as specifed and directed.

S&F in repair CP telephonic shower rose all as specifed and directed.

S&F in repair vitreous china bowl urinal flat back size of 465X355X265 mm white (minimum) with grating and union for discharge pipe including flush pipe and waste pipe (excluding flushing cistern) all as specified and directed .

S&F in repair for vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S&F in repair CP urinal spreader for fixing with 15mm dia pipe all as specified and directed.

S&F 15mm dia CP jet with CP flexible pipe 90cm long including necessary fittings all as specified and directed .

S&F 15mm bore health faucet with CP flexible pipe 90cm long including necessary fittings all as specified and directed .

M&L 16-18mm thick granite slab on top of cooking platform and or bar counter including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:4. including grinding and polishing all as specified and directed.

M/S Bhujwan Construction vill Ravigram M/S Bhujwan Construction vill Ravigram M/S Bhujwan Construction vill Ravigram

ms triveni nirman

SIDHARTH CONSTRUCTION