CONSTRUCTION OF LIVING IN ACCOMMODATION FOR SNCOS AT AF STN BARRACKPORE UNDER GE (AF) BARRACKPORE

Amount

Sch 'A' Sec -I (Building work) Note:- This schedule is not pre-priced by MES and the pre-priced rate as "Rs. 0.00" indicated under Col.5. signifies this fact only Construction of double storyed living in accommodation for SNCOs on permanent specification including framed structure, seismic consideration ATT, APP roof treatment complete all as specified and shown in drawing.

Total amount of Sch 'A' Part-II (Site clearance and earthwork) Prepriced amount B/F from Sl page No. 23

Total amount of Sch 'A' Part-III (Internal Electrification) Prepriced amount B/F from Sl page No. 25

Total amount of Sch 'A' Part-IV (Internal water supply) Prepriced amount B/F from Sl page No. 26

Total amount of Sch 'A' Part-V (Path ) Prepriced amount B/F from Sl page No 27

Total amount of Sch 'A' Part-VI (Sewage disposal) Prepriced amount B/F from Sl page No. 29

Total amount of Sch 'A' Part-VII (External water supply) Prepriced amount B/F from Sl page No. 30

Total amount of Sch 'A' Part-VIII (External electric supply) Prepriced amount B/F from Sl page No. 32

Total amount of Sch 'A' Part-IX (Area Drainage) Prepriced amount B/F from Sl page No. 33

Total amount of Sch 'A' Part-X (Solar water heater) Prepriced amount B/F from Sl page No. 34

Total amount of Sch 'A' Part-XI (Demolition ) Prepriced amount B/F from Sl page No. 35

Total amount of Sch 'A' Part-XII (Site clearance ) Prepriced amount B/F from Sl page No. 37

Sch 'A' Part-XIII (Misc Items) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

RCC Septic tank with up flow filter designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users complete as shown in drg and as directed. Note : Rate incl for dewatering during construction

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2M x 4.5M deep complete as shown in Drg and as directed Note : Rate incl for dewatering during construction

Supply, Install, Testing and Commissioning of ‘SOLAR WATER SYSTEM' (Evacuated Tube Collector) based on direct transferring of heat of capacity 200 LPD complete all as specified and directed by Engr-in-Charge.

Dismantling old u/s valve pit and reconstruction of brick masonry valve pit of size 90cm x 90 cm x 90cm (internal dimension) with one brick thick P.C.C 1:4:8 type D-2 (using 20mm graded crashed stone aggregate) as in foundation concrete incl PCC (1:3:6) type CI (using 20mm graded crashed stone aggregate) as in bedding and coping 10mm thick cement plaster in Cement mortar (1:4) internally & externally upto 15 cm below ground level providing valve pit 50x50x6mm angle iron frame all round the fixed point by means of 4 Nos hold fast 150mm long made out of flat iron 40 x 6 mm embedded in PCC block (1:2:4) type B-I (using 20mm graded crashed stone aggregate) of size 230 x200 x100mm. incl provn of hing welded with angle iron frame and Mild Steel cover 3 mm thick, Mild steel handle of suitable and size welded with MildSteel cover & suitable locking arrangement & applying two coats of synthetic enamel paint over a coat of red-oxide primer incl necessary excavation work in soft/ loss soil complete all as specified & directed

Supply and installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage Capacity of 80 litres and nominal cooling capacity of 40 Litres per hour complete all as specified & directed

Supply and fixing of Voltage stabilizer for automatic operation, single phase naturally air colled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +/- 2.5 % and of capacity 1.0 KVA complete fixed on wall with suitable size of nut & bolt complete all as specified and directed by Engr-in-Charge

M&L for submain wiring comprising single core, 2 Runs of 2x4.0 sqmm + 1x4 sqmm nominal cross sectional area multistranded copper conductor cable, FRLS PVC insulated unsheathed 1100 Volts grade drawing in and including 20mm dia. PVC conduits and conduit fittings complete all as specified and directed by Engr-in-Charge (Note - two run single core cable, one run of earth conductor and one run on PVC conduit shall be measured as a unit length.)

M&L for submain wiring with PVC insulated unsheathed, stranded FRLS copper conductor cable (1100 volts grade)of size 2x6.0 sqmm including PVC insulated cable of stranded FRLS copper conductor cable for earth continuity of size 1x6.0 sqmm connected to common earth dolly and to be drawn in concealed heavy duty rigid PVC conduit of size not less than 20mm complete all as specified and directed by Engr-in-Charge (Note - two run single core cable, one run of earth conductor and one run on PVC conduit shall be measured as a unit length.)

M&L for submain wiring with PVC insulated unsheathed, stranded FRLS copper conductor cable (1100 volts grade)of size 2x10.0 sqmm including PVC insulated cable of stranded FRLS copper conductor cable for earth continuity of size 1x10.0 sqmm connected to common earth dolly and to be drawn in concealed heavy duty rigid PVC conduit of size not less than 20mm complete all as specified and as directed by Engineer in Charge. (Note - two run single core cable, one run of earth conductor and one run on PVC conduit shall be measured as a unit length.)

M&L for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engineer in Charge.

Supply and fixing tubes, medium grade galvanised, of size 25 mm dia with all fitting and fixed complete to walls and ceiling of laid in floors complete all as specified and as directed by Engineer in Charge.

S&F LED Bulb suitable for normal holder of 12 wattage 240 volt rating complete all as specified and as directed.

S&F exhaust fan easy clean plastic body, high speed low noise exhaust fan 300 mm sweep with making all fixing arrangements like making hole, grouting nuts and bolts etc and connection upto ceiling rose complete all as specified. Note:- (a) cost to the suitable opening in wall for fixing of exhaust fan is deemed to be included in the cost of building.

S&F ceiling fan of 1200 mm sweep, 240 volts, 50Hz, high speed with BEE rated 5 star and connecting up including provision of cable from ceiling rose or connector to fan with flexible copper cable of suitable size complete all as specified and as directed by Engr-in-Charge

S&F Regal Batten for LED Tube single side connection upto 1x22 watt LED Tube including ultra bright LED tube light 20 watt with high efficiency suited for installation inexisting tube light G13 lamp holders to give Glare free light complete connection upto ceiling rose complete as specified and as directed by Engr-in-Charge

S&F mirror light LED Type 6 wattage suitable for fixing on wall/ceiling complete including connection upto ceiling rose complete all as specified and directed.

S&F LED security light ENDURA CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver complete including all fixing arrangements like GI bracket made out of 1.5 mtr long GI pipe 32 mmdia and nuts and bolts etc complete all as specified and as directed by Engr-in-Charge

Supply and fixing MCB tripple pole and neutral 63 Amp 415 volt rating with rupturing capacity 10 KA complete all as specified & as directed by Engr-in-Charge.

Supply and fixing MCB single pole and neutral 20 to 40 Amp 240 volt rating with rupturing capacity 10 KA complete all as specified & as directed by Engr-in-Charge.

Supply and fixing MCB single pole 6 to 32 Amp 240 volt rating with rupturing capacity 10 KA complete all as specified & as directed by Engr-in-Charge.

Supply & fixing blanking kit for MCB DBs complete all as specified and as directed.

M&L for bricks of fly ash bricks, for cable protection in trenches laid dry and flat complete all as specified & directed

M&L for cutting the road / hard standing and making good disturbed surface by using PCC type C2 (1:3:6) by using 40 graded stone aggregate for the fixng the pipe complete all as specified and directed by the Engr-in-charge.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 75 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by the Engr-in-charge.

S&F for LED street light fittings comprising of epoxy powder coated housing, enclosed with heat resistance glass cover IP 65 complete all as specified and directed by the Engr-in-charge.

M&L for street light bracket (suitable for LED fittings upto 1.5 RM make out of GI pipe of medium grade 40 mm dia proper shaped, bended, threaded and drilling holes for wire entry and MS clamp of suitable size in proper shape complete all as directed by the Engr-in-Charge at site.

M&L for loop box out door type made out of 2mm thick MS sheet, size 450 x 300 x 150mm, factory made cubicle shaped total enclosed dust proof , having front, opening and locking arrangement including four aluminium bus bar on porcelain bridge insulator , one porcelain cut out of 16 Amps capacity and enamel danger notice plate duly fixed on the pole by MS clamp of suitable sizes, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by the Engr-in-Charge at site.

M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).

Supply, installation, commissioning and testing of LT feeder pillar of size 750mm x 600mm x 600mm factory made (CPRI approved), outdoor cubical compartmental type, single door, both side openable with hinged and locking arrangement, outgoing cable chamber with same rated aluminium strip from cable chamber to MCCB output, made out of 3.15mm thick mild steel CRCA sheet supported and fixed on structrual frame of angle iron of size 60 x 60 x 6mm angle iron frame including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate, suitable for 3 phase 4 wire system 440 volts grade with necessary wiring with PVC sheathed stranded copper conductor of appropriate length size with and including fixing lugs, bolts, screws etc complete all as directed by the Engr-in-Charge and comprising of the following accessories :- (a) Copper bus bar of capacity 200 Amp--04 Nos

Itrem no 31 Cont... (b) MCCB 100 A 415 V, 4 pole, 50 Hz, 25 KA with thermal magnetic release adjustable type - 01 Nos (Incomming). (c) MCCB 40A thermal magnetic release adjustable type,415 Volts 4 pole, 16 KA - 02 Nos (d) LED indicator lamp with holder (Yellow, Blue, Red)- 01 Set (Set of Three). (e) Multifunction Meters, Model B class 1 RS485 Port complete - 01 Nos (f) Time switches astro type (Having longitude and latitude of Indian cities in memory) 250 V single phase of 20 Amp rating with contactor fitted inside steel enclosure. - 01 Nos

S&F cable PVC insulated industrial flexible FR 1100 Volt grade with stranded copper conductor of size 2.5 sqmm 2 core complete as specified and directed

DNS CONSTRUCTION COMPANY

[email protected]

MERCANTILE AGENCY