CHITHARA .- G P- 2020-21-CMLRRP -MELEMUKKU- CARARA ROAD CONCRETING ,SIDEWALL AND EARTHWORK

Amount

APPENDIX-A-ROAD CONCRETE

od648670/2020_2021 : Mord; :surface dressing of the ground in A ll kinds of soil including removing vegitation and in -equalities not exceeeding 15cm deep and disdposal of rubbish ,lead up to 50m and lift up to 1.5m

od648671/2020_2021 : Mord; plain cement concrete pavement ,thickness as prer design over a prepared sub base with 43 grade cement or any other type asper clause 1501.2.2mM20 (grade)carse and fine agregates conforming to IS 383 maximum size of carse aggregate not exceeding 25mm in aconcrete mixer of not less than 0.2formwork ( steel channel wedges steel plates including levelling the formwork asper drawing)spreading the concrete with showels ,rakes compacted using needle vibrator and finished in continous operation including provision of contraction and expansion construction joints curing of concrete slabs for 14days water finishing to lines and grade as per drawing and technical specification clause 1501(formwork used)

APPENDIX-B-SIDEWALL CONSTRUCTION

11.1.1.1 : Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.I.Ordinary soil(i)Upto 3 m depth

od712346/2020_2021 : DRY RUBBLEMASONRY-Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levals cost ans conveyance of all matrials labour charges etc.complete as per direction of departmental officers at site

11.4.4 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203IV.R.C.C grade M 20

11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

10.4.A.1 : Direction and Place Identification signs with size more than 0.9 sqm size board <br> A. Retro-reflectorised Traffic Signs <br> 1 Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Jayadrajan S

NIZARUDEEN

Bidder Name

NIZARUDEEN

Jayadrajan S

S SURENDRAN PILLAI