Construction of New LDR Complex Building (Maternity complex with roof Top Solar Facility) at PHC Piplod, Ta. Dediapada, Dist Narmada (Deposit Work)

Name of Work : Construction of New LDR Complex Building (Maternity complex with roof Top Solar Facility)

at PHC Piplod, Ta. Dediapada, Dist Narmada (Deposit Work)

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking of

useful materials and disposing the excavated stuff up to 50 mt lead (B) Dense or

2 Hard soil for foundation for depth from 1.5 m to 3.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 50 201.00 Cu.M 174.56

Meter lead. (B) Dense or Hard soil

3 Filling in plinth with sand under floors including watering ramming, consolidating and

dressing etc. complete. 14.00 Cu.M 489.28

4 Filling available excavated Earth (Excluding Rock ) in trench plinth side of foundation

etc. in layer not excluding 20 cm in depth consolidation each deposited layer by 336.00 Cu.M 137.47

ramming and watering etc. complete

5 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 191.00 Cu.M 304.60

6 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T. stone

aggregates 40 mm. nominal size) and curing complete excluding cost of from work in 38.00 Cu.M 2825.98

:(a) Foundation and plinth

7 Providing and laying controlled cement concrete M150 for curing complete including

cost of formwork but excluding the cost of reinforcement for reinforced concrete 67.00 Cu.M 3792.55

work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass concrete.

8 Providing and laying controlled cement concrete M250 for curing complete including

cost of formwork but excluding the cost of reinforcement for reinforced concrete 62.00 Cu.M 4460.16

work in (A) Foundations, footings,Base of columns and Mass concrete.

9 Providing and laying controlled cement concrete M250 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Column Up to Plinth 13.00 Cu.M 7832.16

10 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts and struts up to floor two level 29.00 Cu.M 7798.14

for Columns For All Floors.

11 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 50.00 Cu.M 5822.65

reinforced concrete work For Plinth Beams

12 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 63.00 Cu.M 5887.58

reinforced concrete work in BEAMS For All Floor.

13 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 55.00 Cum 6494.69

reinforced concrete work for Slab All floors

14 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 10.00 Cu.M 7340.18

reinforced concrete work For Lintels in All Floors

15 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 7.00 Cu.M 6481.75

reinforced concrete work For Chajja in All Floors

16 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 8.00 Cum 8381.99

reinforced concrete work in STAIR CASES for All floor

17 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending

binding and placing in position complete for All Floor 43015.00 Kg. 78.00

18 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing with

nail & GI washer as per director in Charge 83.00 Sq.M 74.74

19 Brick Work using Common Burnt Clay Building Bricks having crushing strength not

less than 35 Kg/sm. in super structure Above plinth level up to floor two level in 161.00 Cu.M 4576.81

cement mortar (1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors

20 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in 118.00 Sq.M 696.90

super structure above plinth up to floor two level Conventional Bricks for All

21 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm to

15 mm wide groove as per design etc. complete 58.00 Rmt 44.07

22 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

or half brick walls for interior plastering upto floor two level and finished even and 1141.00 Sq.M 186.85

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) All Floors

23 Providing 10mm thick cement plaster (mala troweled finish) in Single coat on

Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 612.00 Sq.M 163.62

smooth in (ii) cement mortar 1:4 (1 Cement : 4 Sand) For ALL Floors

24 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested by

this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse

sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for all 1138.00 Sq.M 358.11

heights as directed etc. complete.

25 Providing Water proofing Treatment on Sunk Slab including cement concrete flooring

1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid

in one layer and finished with a floating coat of neat cement average 50mm thick to 75.00 Sq.M 373.70

Prepare slope including water proofing chemical etc. Complete for Sunk Slab All

26 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for Sunk

Slab or as directed by Engineer in Charge etc complete. 8.00 No 101.91

27 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two coats

of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and 1767.00 Sq.M 40.59

other foreign matter and sand papered smooth.

28 Wall painting (three coats) of plastic paint with one wall highlight in special effect

(royal play) colour, shade and colour of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the 1141.00 Sq.M 128.38

surface free from mortar droppings and other foreign matter and sand papered

29 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand 582.00 Sq.M 90.48

papered smooth.+ Extra painting with plastic emulsion paint of pproved brand on

ceilings and sloping roofs.

30 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to 1135.00 Sq.M 122.14

remove all dirt, and remains of loose powdered materials.etc complete

31 Providing and fixing 60 x 45 CM Machine cut, free edges, mirror polished Blue Kotah

stone slab flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 ( 1 cement:6

coarse sand) jointed with matching pigment & cement slurry including rubbing and 36.00 Sq.M 1189.78

polishing finishing etc. complete.

32 Providing and fixing 60 x 45 CM Machine cut, free edges Blue Kotah stone slab

flooring 25 mm thick laid on 10 mm thick cement mortar 1:3 ( 1 cement:3 coarse

sand) for Skirting & Riser including jointed with matching pigment & cement slurry 3.00 Sq.M 1205.60

including rubbing and polishing finishing etc. complete.

33 Providing and laying 60 x 60 Cm Soluble salt vitrified Tiles 10 mm thick Tiles in

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material including 330.00 Sq.M 1663.47

dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete for light shade

34 Providing and laying Soluble salt vitrified 10 mm thick tile Tiles in skirting, risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 28.00 Sq.M 830.22

pointing in white cement with white cement slurry

35 Providing and laying coloured matt finished Anti skid ceramic tiles of the size

mm x 300 mm in skirting, risers of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in white 15.00 Sq.M 1017.30

cement etc. complete. Colour and Shade approved by Engineer-In-Charge

36 P & L Colour Premium printed Ceramic tiles size 60 x 30 cm 6 mm thick in skirting

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) 120.00 Sq.M 1070.50

and jointed with colour cement slurry

37 Providing and fixing machine cut, free edges, pre mirror polished Granite Marble slab

18 mm thick (single piece not less than 150 cm ) for vertical wall/Doors/Windows

Sill,Jams for cladding as per design including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey 105.00 Sq.M 2425.01

cement slurry including rubbing and polishing finishing etc. complete.

38 Providing and fixing Machine cut & Polished Granite marble in 7.5 CM width Strip

flooring for Ramp even grade over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with 12.00 Sq.M 2314.92

pigment to match the shade of slab including rubbing and polishing etc. complete.

39 Providing and laying water proofing treatment with china mosaic tiles flooring over

avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve surface &

mm to 20 mm of broken piece not more than 2.5CM of ceramic / glazed tiles ( one

for more colour as directed ) to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain water proofing materials per bag of cement useas specified

by manufactured and slops to be tempered to bring mortar up to surface with using

white cement and colour pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends any patens or design as per

drawing and cleaning by using oxalic acid etc. complete.

40 Providing and fixing Double shutter 35 mm thick solid core wooden Flush Double

shutter conferming to IS:2202 & ISI approved manufacture finished with 1 mm mm

thick Laminates on both side of shutter, machine Glued PVC beading on Pheriphary,

S.S. Handle and S.S. fixtures & Locaking arrangement of standard make of kitch or 9.00 Sq.M 5180.29

Equivalent, on Each shuuer, Fixed with minimum 4 Nos. 150 mm high S.S. hinges,

sample & shade to be approved by the architect.

41 Providing and fixing Single shutter 35 mm thick solid core wooden Flush Single

shutter conferming to IS:2202 & ISI approved manufacture finished with 1 mm mm

thick Laminates on both side of shutter, machine Glued PVC beading on Pheriphary,

S.S. Handle and S.S. fixtures & Locaking arrangement of standard make of kitch or 26.00 Sq.M 5263.11

Equivalent, on Each shuuer, Fixed with minimum 4 Nos. 150 mm high S.S. hinges,

sample & shade to be approved by the architect.

42 Providing and fixing FRP Door frame size 100 x 50mm and 35 mm thick FRP Depress

panels Single shutter having extra reinforcement on sides and edges in gel coat finish

the core of shutter and frame is to be filled up with injected fire retardant grade

polyurethane foam done in situ along with embedded wooden pieces for stiffening

and also taking hinges and fixtures the whole FRP Frame and shutter is to be water 15.00 Sq.M 2377.76

proof, whether proof, termite proof and resistance to mild acid / alkali Rates are to

be inclusive of SS hinges with necessary screw and aluminium fixtures and fastening

and fastener sleeve and directed by engineer in change with detailed drawing.

43 Providing and fixing jindal Series E (30 mm) series Two track shutter + one shutter

mosquito net alluminimum window standard extureded colour anodized section

with frame having frame bottom member jindal section no:20737 @ wt. of

kg/Rmt, frame side and top member jindal section no.:20738 @ wt. of 0.547 Kg/Rmt

ith sliding shutters of single glass shutter top & bottom member Jindal section

no.20993 @ wt.of 0.839 Kg/Rmt, & side member jindal section no. 20549 @ wt. of

0.809 Kg/Rmt & inter lock member jindal section no. 20550 @ wt. of 0.994 Kg/Rmt.

with 5 mm thick transperent plain float glass in shutter including fitting, fixtures,

rubber gasket and transperent silicon seleant as per drawing and instruction of

engineer in charge etc.

44 Providing and fixing standared extruded of alluminium ventilation with 3 mm thick

Bajri figure adjustable tinted louvers Glass fixed to aluminimum strip blade incuding 3.00 Sq.M 1124.21

fixtures, fastenning, labour and equipments as per Detailed Drawing as Directed.

45 Providing and fixing 90 cm high Stainless Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with S.S. 304 grade baluster of

32 mm dia (16 gauge) as a vertical support fixed in RCC slab / steps of stair at 1.2 Mt.

c/c including three horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal distance 28.00 Rmt 2377.54

fixed by 16 mm dia (16 Gauge) S.S. pipe with baluster including accessories as per

detailed drawing as directed etc. complete.

46 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on 10000.00 Liter 3.95

47 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR (Type

B) Pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm 64.00 Rmt 897.79

length x 145 mm height at every 2000 mm centre to centre or shall be concealed in

walls as directed including necessary fittings such as bends, "Y" "T" shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

48 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fitting conforming to IS 14735-1999 of approved make for drainage system

pipeline, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 196 mm high 64.00 Rmt 834.38

at every 2000 mm centre to centre or shall be concealed in walls as directed

including necessary fittings such as bends, shoes, tees, etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost of all materials (i)

49 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall 32.00 Rmt 195.67

be concealed as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all materials.

50 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc. including testing of pipe 16.00 Rmt. 148.12

and joints and fixing the same with adhesive solvent, including cost of all materials.

51 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all materials.

52 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, 40.00 Rmt. 253.82

and floor, etc. complete 25 mm dia

53 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, 84.00 Rmt. 170.36

and floor, etc. complete 15 mm dia

54 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm

55 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm

56 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm

57 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii)

58 Providing and fixing wash down water closet (European W.C. Pan) with integral P or S

trap and PVC dual flush tank with complete fittings including cutting holes in walls

and making good the same connecting the flush bend with cistern and closet etc. 8.00 No 3227.96

complete including plastic seat cover, water jet and including jointing trap with

Waste pipe overall size as per the selection of the Model by E.I.C. or as approved}

59 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i) In

white colour. including with approved sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with 9.00 No 2147.26

connection 15mm dia flexiable pvc pipe etc. complete

60 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia. 14.00 No 186.83

61 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down or 10.00 No 600.23

hinged grating including the cost of cutting and making good the walls.

62 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and

water tight C I cover with frame of 300 x 300 mm size (inside) with standard weight 8.00 No 1246.92

(i)square mouth traps (C) 150 mm x 100 mm size P or R type

63 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr long plc. heavy

duty supply pipe with two side male female checknut etc. complete. 8.00 No 308.99

64 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with C.P. 9.00 No 859.41

brass screws and washers.

65 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 8.00 No 90.90

66 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 8.00 No 50.50

67 Constructing brick masonry chamber for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I.

Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, Total weight

of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone 30.00 No 3660.76

aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls &

abed concrete etc. complete.(ii) Inside dimensions, 500 mm. x 700 mm. and 450 mm.

Deep for pipe line with one or two inlets.

68 Applying general insecticide pest control treatment to floors, cupboards etc.

including labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS

part-III (0.075% Concentration by mass) is recommended 10.5 ml chemical dilute 177.00 Sq.M 43.97

with 5 litters of water application 0.5 Litre chemical / Sq.M of surface is

recommended as per I.S

69 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes and

joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware

pipes (166mm Ave. bed thickness) of following internal diameters with necessary

formwork and curing complete.(B) 150mm dia.

70 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes and

joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware

pipes (166mm Ave. bed thickness) of following internal diameters with necessary

formwork and curing complete.(B) 110mm dia.

71 Providing and laying (to level or slope) and jointing reinforced concrete not pressure

pipes IS class NP 2 of the following internal diameter with collars and nut ends 60.00 Rmt 678.03

prepared for collar joints including testing of joints complete 300 mm dia

72 Providing and laying in trenches jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make equivalent as approved by

Engineer In Charge, including necessary fittings etc. including testing of pipe and 30.00 Rmt 195.67

joints and fixing the same with adhesive solvent, including cost of excavation &

refilling the same with all materials.

73 Providing and fixing Safety Grills of required pattern for windows/door using 16mm x

16 mm square M.S. polished bars, Required at required spacing as per design and

hold fast with coach bolts including one coat of primer and two coats of matt 2154.00 Kg. 116.91

finished oil painting etc. complete.

74 Providing plinth protection to building including excavation in ordinary soil and laying

cement concrete 1:4:8 using stone aggregates of 40mm nominal size in foundation

layer 0.10 mt. thick below pre-cast Rubber Dye inter locking concrete block 60mm

thick with grade of concrete M200 pneumatic compressed by mechanically pressed

and as per approved design including 75mm Sand layer for levelling and filling the

joint with sand in proper line and level etc. complete, Including Providing and fixing 35.00 Sq.M 1313.00

pre-cast concrete kerb stone of grey cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concrete as per approved design and including

excavation for fixing in proper line and level, filling the joint with C:M 1:3

(1cement:3fine sand) etc. complete.

75 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 35.00 Sq.mt. 705.95

mm Sand layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

76 Providing and fixing in position 300 mm high, 150 mm wide English/Gujarati letters

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in-charge with 15.00 Nos. 707.00

all necessary tools & plants etc. complete.

77 Providing and fixing in position 150 mm high, English/ Gujarati letters made from

mm thick stainless steel sheet as directed by Engineer-in-charge with all necessary 15.00 Nos. 404.00

tools & plants etc. complete.

78 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling 100.00 Rmt. 339.05

and floor.(G)110 mm

79 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling 20.00 Rmt. 515.27

and floor.(G)160 mm

80 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS

steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than

kg as per directed by Engineer-in-charge

81 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm thick

cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 top cover 10.00 Nos. 15246.96

with frame of minimum weight of 35 kg & filling filter material kapchi in layers (25-

40mm & 10-20mm) & BT metal 40mm & sand as per directed by Engineer-in-charge.

82 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with

excavation filling the pit with gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10-20mm) 10.00 Nos. 9834.37

& BT metal 40mm & filling brick as directed by Engineer-in-charge.

83 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 50 10.00 Cum 187.29

Meter lead. (B) Dense or Hard soil

84 Brick work using common burnt clay building bricks having crushing strength not less

than 35 Kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 51.00 Cmt 4279.98

fine sand) (B) Conventional.

85 Providing and laying controlled cement concrete M-200 and curing etc. complete

including the cost of form work and excluding the cost of reinforcement etc. 11.00 Cmt 8846.59

complete in RCC wall up to floor two level for Below plinth

86 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1

including neat cement finishing watering etc. Complete 17.00 Rmt 24.28

87 20mm thick sand faced cement plaster on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. + Providing and 87.00 Sqm 370.67

mixing water proofing materials in cement mortar in proportion recommended by

the manufacturer.

88 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 55.00 Sqm 1070.50

cement slurry (upto 10 ton)

89 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less

than 35Kg. 1.00 Nos. 958.17

90 Providing & erecting open well horizontal mono block pump set with cast iron body,

complete for three phase submersible motor having [H]For 15 H.P,3 phase open well

horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR 2.00 Nos 36107.50

head suitable for 65/80 mm dia delivery pipe

91 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick flooring

over 20 mm (average)thick base of cement mortar 1:6 (1-cement 6-coarse sand) or

L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed with grey cement 13.00 Sqmt 1019.39

slurry mixed with pigment to match the shade of slab including rubbing and polishing

92 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free from mortar dropping 82.00 Sqmt 77.30

and other foreign matter and also including preparing the surface even and sand

papered smooth.

93 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on Celling and sloping roof to give an

even shade, over and including a priming coat with distemper primer of approved

brand and manufacture after thoroughly brushing the surface free from mortar 26.00 Sqmt 85.85

dropping and other foreign matter and also including preparing the surface even and

sand papered smooth.

94 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S

laths inter-locked together through heir entire length and jointed together at the

ends by end locks mounted on specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside and outside locking with push-pull 17.00 Sqmt 3784.54

operation including the cost of hood cover and sprig etc.complete(A) Shutters having

width Above 3.5M

95 Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

0.738 Kg/mt) horizontal two track member size size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt), vertical member of size size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section 4.00 Sqmt 2362.39

no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with

mm thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete for W2&W3

96 Providing and fixing Mirrar polished 18 mm thick Green Marble stone with full round

edge and polished of approved quality in clading on sill and around the doors/

windows/ ventilation with 20 mm thick cement motor CM (1:3) and fixing with 12.00 Sqm 1730.13

cement slurry & adhesive including moulding of exposed edges as directed by

engineering in charge etc. complete.

97 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose collapsible /

boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC / ERW casing pipe above 100.00 Rmt 414.10

12 meters and up to 40 meters depth by DTH rig etc.complete

98 Supplying slotted PVC pipes of approved quality at site of work confirming to IS.

99 Supplying PVC plain pipes of approved quality at site of work confirming to IS.

100 Providing and jointing flat flexible coppered calble PVC insulated enamelled aproved

make three core 2.50mm. 25.00 Rmt. 117.16

101 Supplying submersible pump set suitable for bore of 150 mm dia or more having

phase motor capacity not less than 10 HP with [A] 10 stage 575 to 480 LPM discharge

at 60 to 70 mtr head for 65 mm dia delivery pipe Supplying and erecting push

button operated fully automatic Star-Delta starter with 3 Nos.of 32A. rating 1.00 Nos. 54277.40

contactors and. 1 No. of directly operated thermal overload relay having 20-32A

range in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. motors up to 35 H.P.

(A)P.W.Blockwith necessary connection complete erected onas directed. Cat-II

102 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes

(medium grade) of the 50mm nominal bore, tube, fittings and clamps incldg. Making 25.00 Rmt 608.35

good the wall ceiling and floor (F) 40mm dia..

103 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes

(medium grade) of the 25mm nominal bore, tube, fittings and clamps incldg. Making 25.00 Rmt 401.95

good the wall ceiling and floor.(C) 25mm dia.

104 Earthwork in cutting including preparing the slope and camber andstacking or

utilising the cutting stuff in bank as directed upto 200 Meters from the end of cutting

with all lead and lift.(i) Hard murrum.+ Add extra over item 9 for conveying and 27.00 Cum 396.05

utilising the stuff in bank from end of cutting with all required lead and lift.(C) Above

400 Meters upto 500 Meters

105 Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work 181.00 Cu.M 1108.12

106 Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut

earlier and disposal of unserviceable materials (C) By mechanical means in area of 1.00 Ha 28455.09

107 Earthwork in cuting in all sorts of soil and soft murrum including conveying and

spreading the stuff, embankment as and where directed within 200meters from the 255.00 Cmt 137.33

end of the cutting with all required lead and lift.

108 Providing and casting in situ ordinary cement concrete M- 150 for coping, over riding

returns including formwork curing and finishing complete. 2.00 Cmt. 3705.34

109 Providing & fixing M.S. grills of required pattern in gaps of openings including frame

work etc. with one coat of red lead paint & two coats of oil paint etc. complete. 1800.00 Kg 112.95

110 Providing and fixing concertina coil fencing with punched tape concertina coil

mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt height

of wall with existing angle iron (50mm x50mm x5mm )requird shaped As per

Directed Engeenier in charge. placed 2.4mt or 3.00mt apart and with 4 horizontal

R.B.T. reinforced barbed wire(3 mm) , stud tied with G.I. staples and G.I. clips to 85.00 Rmt 342.39

retain horizontal, including necessary bolts or G.I.barbed wire tied to angle iron, all

complete as per direction of Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at compound wall

for ESR M4/ intakewell.

111 Providing, laying and filling 50mm thick expansion joint by hydro cell semi rigid UV

resistance with high performance laminated closed cell polyyhene foam joint filler in 9.00 Sqmt 1441.90

sheet foam as directed etc.complete.

112 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with 86.00 Pt. 582.77

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete.Cat-III

113 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box, single mounting 56.00 Pt. 809.01

base frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.Cat-III

114 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following type of 44.00 Pt. 612.06

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat-III

115 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board.(f) with medium class Rigid PVC pipe and accessories erected concealed in 25.00 Pt. 894.86

wall/ceiling complete.Cat-III

116 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with 26.00 Pt. 309.06

following type accessories. Cat-III

117 Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site 11.00 No. 160.59

situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket [A] For

One Gang.Cat-III

(4) TV Co-axial Socket outlet cat-III 11.00 No. 160.59

(7) Blank Plate Single cat-III 40.00 No. 25.25

(8) Computer RJ-45 socket Cat-III 6.00 No. 160.59

(10) 6/16Amp. Universal socket Cat-III 26.00 No. 199.98

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch Cat-III 26.00 No 410.06

118 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in 540.00 Mtr 36.36

approved manner as directed (b) 25 mm

119 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 310.00 Mtr. 104.03

stranded wire of green colour for earth continuity of following size.(A) with medium

class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm

120 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 260.00 Mtr. 132.31

colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and

accessories.(a) 2 wire 4 sq. mm

h) 4 wire 6 sq. mm 90.00 Mtr. 326.23

121 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size 10.00 Mtr. 177.76

of copper lugs, nuts and bolts if required.(g) One wire 16.00 sq. mm

122 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

marked copper wires of following size to be erected as directed.(h) 2.50 Sq.mm 3 84.00 Mtr 97.97

core round PVC sheathed.

123 Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage 220.00 Mtr 62.62

overall sheathed with black PVC insulation.(e) RG-11

124 Supplying & erecting approved make Telephone Cable electrolytic copper conductor

PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of conductors & nos.of pairs. With 220.00 Mtr 20.20

necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured (2) Two Pairs

(6) Twenty Pairs 50.00 Mtr 127.26

125 Supplying & erecting approved make LAN cable of following size in existing pipe as

per direction.[C] CAT- 6 100.00 Mtr 47.47

126 Providing & erecting main Distribution (MDF) indoor type, back mounted frame as

per DoT standard approved with krone strips(b) Suitable for 20 pair 1.00 No 1368.55

127 Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-III

128 Decorative call bell Ting-tong box type 250 volts complete erected 10.00 Nos. 71.71

129 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Tube Light with integral driver (v)

40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-III

130 Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp 8.00 No. 112.11

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts Cat-III

131 Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED 8.00 No 5080.30

driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) 60 - 89 watts Cat-III

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iv) (v) 120 - 159 watts Cat-III 6.00 Nos. 7186.15

132 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to

A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 1.00 Nos. 6790.23

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

133 Supplying & erecting approved make Four Pole 415V change over switch interior for

panel mounting with operating mechanism A.C.23 duty confirming to IS for ©100A / 1.00 Nos. 7790.13

134 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying capacity, erected Rn

with necessary bus bar supports /insulators, main cable socket to each bar, erected Mtr.

in existing cubical panel with necessary connections.(A) Suitable for 100 Amp.

135 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 48.00 Nos. 123.22

existing box. confirming to IS 8828/1996 with ISI Mark Cat-III

136 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be erected in existing box. confirming to IS 14.00 Nos. 297.95

8828/1996 with ISI Mark Cat-III

137 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Nos. 702.96

capacity.(b)40 Amp. Cat-III

138 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having following 1.00 Nos. 811.03

capacity.(C)63 Amp.Cat-III

139 Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for(B) three phase 4.00 Nos. 2339.16

incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b)

sheet steel double door.(i)4 way

140 providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping 12.00 Nos. 2458.34

with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed.(ii) 40Amps. DP.Cat-III

141 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 20.00 Kg. 794.87

142 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch buried in specially prepared earth pit 8.00 Nos. 368.65

complete with necessary 8 SWG earth wire.

143 For using salt and charcoal / coke as required for pipe type earthing. 8.00 Nos. 171.70

144 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make

Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the value of earthing 1.00 Nos. 5842.85

resistane mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.[A] For electrical installation up

to 440 VLength of Pipe - 1 Mtr Back filling compound - 1 Nos. of Bag of 15 Kgs.

145 Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & Sq.

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, 1.00 10468.65

handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size..(A) locally

fabricated panel board (i) with 350 mm depth

146 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm

147 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of 180.00 Mtr. 112.11

following size of cables. (b) 2 core 6 Sq. mm.

148 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in 120.00 Mtr. 184.83

existing trench / pipe of following size of cables (a) 4 core 16 Sq. mm

149 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in 140.00 Mtr. 229.27

existing trench / pipe of following size of cables.(A) 4 core 25 Sq. mm

150 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating

the fault all over the run and back filling the same and making the surface as normal 256.00 Mtr. 55.55

151 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across

the road crossing or on floor with necessary material in an approved manner and 20.00 Mtr 397.94

making the ground as per original.(B) 400 mm dia.

152 Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below ground 277.00 Mtr. 62.62

/ road surface for enclosing cable .(A)50 mm outer dia.

153 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc for 28.00 Nos. 38.38

following size of cables. 2 to 4 core 6 Sq. mm

2 to 4 core 16 Sq. mm 2.00 Nos. 47.47

2 to 4 core 25 Sq. mm 2.00 Nos. 51.51

154 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 28.00 Nos. 6.06

155 Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark

with condenser A.C.230V 50c/s. 1400 mm. sweep complete, canopy erected on

existing hook or clamp with earthing [ Make shall be approved by Engineer in 42.00 Nos. 1738.21

156 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with proper insulation without leakage and 42.00 Mtr. 108.07

157 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy 42.00 Nos. 108.07

Duty PVC box complete erected concealed in Ceiling with necessary finishing.

158 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 42.00 Nos. 18.18

159 Supplying & erecting approved make low noise decorative exhaust fan having square

frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II 8.00 Nos. 1703.87

160 Providing suitable M.S. louver shutter of the Exhaust fan. 8.00 Nos. 368.65

161 Providing recess in wall or window frame suitable for erection of Exhaust fan

complete with plastering and colour washing to match the colour of the wall or

window complete with expanded metal in order to render the fitting in accessible 8.00 Nos. 189.88

and the room water-proof.

162 Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm

Din-Rail for MCB Mounting, stud type terminal and arrangement for cable 8.00 Nos. 7561.87

termination to be erected With Suitable foundation (Included) as per details given

by manufacturer considering site requirement.(C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts

and 600mm long J-Bolt.Approx Pole weight 46 kg

163 Providing and erecting street light pole bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with suitable B Class G.I sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length

with suitable rise as per site condition & suitable welded stiffener reducer and nipple 8.00 Nos. 614.08

with check nut complete painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm

164 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚C within a hour, The water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit, water tank surrounded by 1.00 Nos. 61012.08

evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

165 Supplying & erecting reverse osmosis (RO) water purification system with M.S.

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed [D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH

@ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron 1.00 Nos. 77891.20

cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No -

Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 - (1No), RO

pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate

166 Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board 1.00 Nos. 1275.63

with all connection, wiring etc .with manufacturers calibration certificate.

167 Supplying and erecting approved make panel mounting type Digital Ammeter having

3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing panel board with all connection, wiring 1.00 Nos. 1558.43

etc .with manufacturers calibration certificate.

168 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply

500 V on existing panel board with necessary connections. 2.00 Nos. 317.14

169 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio

15 VA burden erected in existing CRCA box duly secured with insulating materials 1.00 Nos. 274.72

connected to the meter

170 Supplying and erecting approved make suitable panel indicator LED type lamp, lens

cover, complete erected with necessary connections. 3.00 Nos. 43.43

171 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with Solar Panels (ALMM approved): Frame Material : Anodized

Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-

Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax:

0/+5, Module Efficiency should be approx. 19.5%-22%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product

warranty and 25 year Linear Power Warranty includes all mechanical and electrical

parameters of the Solar panel. Modules must be complied to the DCR(Domestic 13.00 KW 42455.35

content requirements). The Ration of AC to DC is 5:6 for the Installation capacity

which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% - 98.9%,

O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P

THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated protection of Inverter

are Anti-islanding Protection, Input Reverse Polarity Protection, Insulation Resistor

Detection, Ground fault protection, Residual Current Monitoring Unit, Output Over

Current Protection, Output Short Circuit Protection, Output Over Voltage Protection,

PV array string fault Protection. Protection Degree: IP65, User Interface LCD & APP,

Datalogger & Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars,

nuts and bolts, etc. shall be Hot deep galvanized with minimum 80micron coating.

The Rectangular / square /circular hollow pipe section used for the structure should

have a minimum thickness of 2.0 mm. other than above, the material thickness

should be minimum 2.5 mm. A certificate of a structural engineer certifying the

strength and stability of the mounting structure to withstand the weight and wind

speed of 150 km/hour throughout the life span of 25 years of the system, shall be

submitted by the vendors. Hot Dipped Galvanized steel coils. suitable arrangement

for base plate for foundation , solar panel mounting, the structure should be suitable

for carry the load of solar panel,wiring, sprinkler system etc. with necessary

foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used for

installtion of stucture should be (SS 304) quality.The ground clearance of the bottom

most edge of solar panel shall not be less than 300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of

System with necessary Swichgears (Suitabel size and protection of ACDB & DCDB),

inter connecting wiring, earthing system as per the CEIG drawing approval, lightining

arrester system as per the CEIG drawing approval, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is included in agency scope

(Excluding All charges namely GEDA Application fees, Solar connectivity Charges,

Meter connectivity Charges, Meter testing Charges and system stability/strenthning

(C ) Grid Tied Solar Power System: 11 - 25 kW (3 - phase)

In Word : One Crore Thirty-Seven Lakh Forty-Two Thousand Four Hundred One Rupees and Seventy Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 253938 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From the

Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Const (R&B) Sub-Division Rajpipla (R&B) Division

Dediapada Rajpipla