REPAIR AND MAINT OF ROADS IN DIBER HALDWANI

Demolition of cement concrete (Unreinforced) in ground floors and pavings n.exc 15 cm thickness (Below or above |Ground level) and removing rubbish material outside MoD . Complete as specified and directed by Engr-in-Charge.

M&L for roughenig surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust & brushing neat cement slurry with 3 kgs of cement per sqm wtc all as specified & directed by Engr-in-Charge.

M&L for Cement concrete work in pavement/hard standing of flexural strength 40 kg per square centimeter in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less and finishing surface of concrete roads, pavements by brooming complete all as specified and directed by Engr-in-Charge.

M&L for Forming 20 mm thick Expansion joints filled with pre formed bituminous filler and 30 mm primed and sealed with sealing compound grade 'A' for 150 mm thick concrete slab complete all as speciied and directed by Engr-in-Charge.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions as specified and directed.

Removing building materoals etc to a distance of 5 km or under, beyond the lead included in rates, including loadoing, unloading and stacking at the destination

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc and including disposal of all debris exc 1.5 KMtr not exc 5 Km.

Providing and and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light trafficparking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mmn thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.