REPAIRS TO FENCING COMPOUND WALL GATE DRAINS ETC AT SVN COLONY MES KEY PERSONAL QUARTERS AND GE OFFICE COMPLEX UNDER AGE BR I OF GE ND VISAKHAPATNAM

Amount

The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:-Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Excavation for post holes (or similar holes) each not exceeding 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm and removal of surplus soil to a distance exceeding 1.5 KM and not exceeding 5 KM and making good for soft / loose soil complete all as specified and directed.

S & F in repairs Galvanized, 2 strand, steel barbed wire with 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc., including dismantling old fencing wire complete all as specified and directed. [Each line wire to be measured.]

S&F PVC coated Chain link MS Galvanised Fencing Mesh of size 150mm x 100mm, 4mm dia wire with minimum 1mm thick PVC coating and of weight not less than 4.5 Kgs/Sqm, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire including dismantling of old chain link fencing any type and size complete all as specified and as directed.

S & F Mild steel work in Framed work such as in ornamental grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. Note:- Design of grills, gate and other similar work shall be as approved by GE.

Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm long complete all as specified and directed.

Supply Only of Mild steel round bars 10 mm dia and over for chainlink fencing/gates and similar wks complete all as specified and directed. Note:- Fixing of line wire shall be deemed to be included in quoted rate of Item No 5

M & L for preparation new or previously untreated steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer by using auto roller or airless sprayer machine complete all as specified and directed

Brick work with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete including demolition of old brick work complete all as specified and as directed.

Brick work in half brick thick walls with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete including demolition of old brick work complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick masonry or concrete surfaces in Cement mortar 1:4, finished fair and even with out using extra cement complete all as specified and directed.

Taking down cement plaster of any description in any position including racking out joints making for key, scrubbing down with water etc and removal of debris from site complete all as specified and directed.

M&L for reinforced cement concrete type B0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in plinth beams, lintel,bases for columns, etc, basement slabs, under-reamed piles and mass concrete including demolition of old RCC complete all as specified and as directed.

M&L for reinforced cement concrete type B1, 1:2:4 using (20 mm graded crushed stone aggregate) as in cover slabs over drain and the like and set in cement mortar 1:4 including demolition of old RCC complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of plinth beams and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, lintels and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, columns and similar work for fair finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

M & L for TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for TMT bars 5 mm dia and over upto and including 10 mm dia , as in stirrups, spacers and binders reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S&F in repairs concertina coil fencing with punched tape concertina coil made from high tensile spring steel ,high carbon wire confirming to IS-4454 Part-I of grade -SM duly hot dipped galvanised 600 mm dia, over 10m openable length with galvanised coating and punched tape material as per IS-513 having 50 Nos rounds per 6m length (before stretching ) having medium barbs (barb length 24+1mm or 24-1 mm ,pitch between two barbs 35+1 mm) spring core wire (2.5mm thick) of high tensile strength of 165kg/sqmm with tape (0.52mm thick) and weight 43.478 gramsm / m and fixing to Y or trapezoidal shaped angle iron bracket placed at 2m to 3m apart with 6/9 horizontal RBT (reinforced barbed tape ) wire stud tied with GI staples and GI Clips to retain horizontal ,including necessary bolts and coating with Px compound (anti rust ) including dismantling of old concertina coil complete all as specified and as directed. [Note: After stretching the coil the length of the compound wall or the straight length on which it has been strectched shall be measured as straight length for payment]

M&L PCC 1:3:6 type C2 (with using 40mm graded shingle aggregate) as in bed of drain including forming channels including demolition of old concrete complete all as specified and directed.

M&L PCC 1:2:4 type B1 (with using 20mm graded crushed stone aggregate) as in benching of drain including demolition of old concrete complete all as specified and directed.

M & L for 75mm thick, PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in plinth protection / paving laid to slope in panels including finishing the surfaces even and smooth without using extra cement including demolition of old concrete complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in roof kerb , coping, benching ,coving rounded or chamfered edges, hold fast block etc including demolition of old concrete complete as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends etc complete akll as specified and directed.

M & L for Precast, prepolished, machine pressed, chemically treated for antifungal properties ,coloured chequered cement concrete tiles of size 300mmx300mmx25mm thick set with mixture of white and with grey cement with no pigment and pointed with white cement and pigments as in floors set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles or stone flooring complete all as specified and directed.

M & L for Machine pressed precast cement conctete coloured interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set in CM 1:4 with grey cement and pigment over and including 30mm thick sand filling , including dismantling of old blocks of any type and size complete all as specified and directed.

S&F 20 mm thick Granite (of any type) work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including dismantling of old stone slabs of any type and size complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat in CM 1:4 for laying floor finishes including dismantling of old tiles complete all as specified and as directed.

Prepration of newly plastered wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying two coats of cement based paint by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed

Sri Venkateswara Constructions

M/s SIRI CONSTRUCTIONS

SREE VIJAYALAKSHMI ENTERPRISES

SUPREET CONSTRUCTIONS

P SRINIVASA RAO

N V S S K N SIVA PRASAD

M/S SRI VENKATA BHAVANI CONSTRUCTIONS

SREE VIGNESWARA CONSTRUCTIONS