Proj No.162 Chinmayajunction Puthukkulamnirappu road renovation ,ward 5

Amount

CHINMAYA JUNCTION PUTHUKULAM NIRAPPU ROAD RETARRING & SIDE PROTECTION IN WARD 05 OF EDAYKKATTUVAYAL PANCHAYATH

75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.9.1.2pb:20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates<br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - I By Manual Means <br> (II) Bitumen (S-65)

75.5.12.A.3.2pb:Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)

OD246140/2022-2023:Sectioning OLD road :-Sectioning up to 150mm and forming the surface for old road way including clearing the road way of any debris ,levelling , cambering etc, complete as per direction of Engineer in charge.

OD236279/2022-2023: Providing plain cement concrete for ROADWORK EXCLUSIVE OF FORMWORK C.C 1:2:4 ( CEMENT :2 FINE AGGREGATE :4 COURSE AGGREGATE) laid to required slope and camber in panels @3m c/c ) as required including compaction USING NEEDLE VIBRATOR, finishing and tamping etc. complete. Max. size of course aggregate not exceeding 25mm, mixed in concrete mixer etc. complete as per specification (i) Nominal mix (1:2:4) modified 75.8.1

JOY THOMAS

Bidder Name

JOY THOMAS

ALI P.P.