Shantidham Crematorium Renovation work at Ankleshwar. (Sixth Attempt)

Name Of Work : Shantidham Crematorium Rennovation work at Ankleshwar.

Sr.No. Item Description Quantity Total Rate Unit Amount

Demolition including stacking of serviceable

1 materilas and disposal of unserviceable materials 5.00 1030.81 Cu.Mt.

with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

Dismentaling stone floors including stacking of

3 serviceable materilas and disposal of unserviceable 464.00 46.77 Sq.Mt.

materials with all lead and lift.

Removing and scraping of old deteriorated plaster

of any thickness from wall / Ceilling / R.C.C member

4 including scaffolding and stacking of serviceable 341.00 18.94 Sq.Mt.

material and disposal of unserviceable from site of

work with all lead and lift

Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.

Dismentling steel work including distempering and

stacking the materials with all lead and lift.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

Box cutting the road surface to proper slope and

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

Extra for Disposing off the excavated stuff for lead

Boring holes 2 mt. deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of

10 the surplus excavated soil as directed within a lead 11.00 796.21 No.

of 50 Meter for following diameter of pipes.(i)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6-Graded brick bat

11 aggregate 40mm normal size) and curing complete 2.00 2976.73 Cu.Mt.

excludingcost of formwork in (A) Foundation and

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in Auger

Sr.No. Item Description Quantity Total Rate Unit Amount

Providing and laying controlled cement concrete

work M200 and curing complete including the cost

13 of form work but excluding the cost of 1.00 7405.32 Cu.Mt.

reinforcement of reinforced concrete work in

Providing and laying controlled cement concrete

work M200 and curing complete including the cost

14 of form work but excluding the cost of 3.00 5535.81 Cu.Mt.

reinforcement of reinforced concrete work in

Providing and laying controlled cement concrete

work M200 and curing complete including the cost

15 of form work but excluding the cost of 2.00 6042.83 Cu.Mt.

reinforcement of reinforced concrete work in

Providing TMT Bar FE 500/500D reinforcement for

16 R.C.C. work including bending, binding and placing 1168.00 76.21 Kg

in position complete

Filling in foundation and plinth with murrum or

17 selected soil in layers of 20cm. thickness including 18.00 289.06 Cu.Mt.

watering, ramming and consolidating etc.

Brick work using common burnt clay building bricks

having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -

fine sand) (B) Conventional

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

19 for interior plastering finished even and smooth in 47.00 167.03 Sq.Mt.

Cement mortar 1:4 (1-cement :4-sand) At Ground

20mm thick sand faced cement plaster on walls

consisting of 12mm thick backing coat of C.M. 1:3

20 (1-cement : 3-sand) and 8mm thick finishing coat of 38.00 329.29 Sq.Mt.

C.M. 1:1 (1-cement : 1-sand) etc. complete.For All

Providing 20mm thick cement plaster on walls with

mixing water proofing materials consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) finished even and smooth etc.

complete for interior and exterior plastering for all

Providing 20 to 25mm groove cutting in cement

plaster as directed by engineer in charge.

Sr.No. Item Description Quantity Total Rate Unit Amount

Applying two coats of acrylic exterior weather paint

on out side of wall surface of approved quality

paint like "APEX" ULTIMA brand make & required

shade after thoroughly brushing the surface free

23 from mortar including scaffolding, cleaning the wall 424.00 114.53 Sq.Mt.

& preparing the surface even & smooth, filling the

cracks including applying one coat of white priming

coat of reputed brand as suggested by Engineer in

charge etc. complete as directed.

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Providing and laying cement concrete flooring 1:2:4

(1-cement : 2-coarse sand : 4-graded stone

25 aggregate 20mm nominal size) laid in one layer and 67.00 330.88 Sq.Mt.

finished with a floating coat of neat cement. (B)

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Providing and fixing M.S. grills of required pattern

with M.S. flats at required spacings and frame

alround, square or round bars with round headed

bolts and nuts or by screws.

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint. (A)In

28 beams and joists, channels angles Tees, flats, with 566.00 90.48 Kg

connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted

to common rafters and the like

Providing corrugated G.I. sheet of class-3 roofing

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

Sr.No. Item Description Quantity Total Rate Unit Amount

Painting two coats (inluding priming coat with

ready mixed priming paint brushing red lead.) on

new steel and other metal surface with enamel

30 paint, brushing, interior to give an even shade 1448.00 122.65 Sq.Mt.

including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and

other foreign matter.

Providing and laying Granite Slab 18mm thick one

side polished in flooring,tread of step and landing

laid on a bed of 20mm(average) thick cement

31 mortar 1:6 (1-Cement : 6-Coarse Sand) finishing 463.00 1802.85 Sq.Mt.

with full moulded round edges, flush pointing in

white or colour cement etc. complete as directed

by engineer in charge.

Providing and laying polished Granite Slab 18mm

thick in Risers of steps Dedo,Skirting, Door window

sill, jambs and pillars laid 10mm thick Cement

32 Mortar 1:3 (1-Cement : 3-Coarse Sand) and jointed 130.00 2329.06 Sq.Mt.

with Grey Cement Slurry including full molded

round front edges,rubbing and polishing etc.

complete as directed by engineer in charge.

Providing and fixing 35 mm thick solid core flush

door Shutter of approved make with both side

lamination using 1mm thick approved laminate

sheets with 6mm thk Lipping/border patti around

flush shutter including fixing S.S. hinges 4"x1"x1",

hold fast , wedges, keys, nails, catch screw, lever

latches , S.S. Handle 10 Cm size of ASIS 304 Grade,

S.S. Aldrop 20 Cm long of ASIS 304 Grade, S.S.

Stopper 20 Cm long of ASIS 304 etc and cutting/

drilling of necessary holes in masonry/ concrete

and grouting of holdfasts with (1:2:4) cement

concrete all as per drawing, specification and

direction of the Engineer, all materials, tools,plant

and labour complete (All fixtures & fittings

shall be stainless steel of approved quality)

approved by architect/Engineer Incharge.

Sr.No. Item Description Quantity Total Rate Unit Amount

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg

/ Rmt, horizontal two track member size 61.85 mm

vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters

34 of horizontal member size 40mm x 18mm x 14.00 1713.70 Sq.Mt.

1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

@ Wt. 0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details

etc complete for window.

Providing,Supplying, fixing Stainless Steel benches

(bakda) L shape base support-3 person seating

capacity with over all dimension seating length of

bench 1560 mm, seating ht of bench 460 mm, total

height 1000mm & Stainless Steel components of

S.S.304 Gindal Pipe handle 1.5 round pipe for

handle, 19x45mm pipe 5nos for seating and 5nos.

for back support of best manufactured and best

quality sample shows at nagarpalika office & at

specified town site of works including fixing,

loading, unloading transporting controll & all taxes

etc all complete.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat III

Sr.No. Item Description Quantity Total Rate Unit Amount

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor

37 more than 0.95, THD < 15 %, CCT 3000 K to 6500K, 15.00 220.18 R.Mt.

Luminaire efficacy> 85 lumens/watt , LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (D) LED Strip Light (ii)

Minimum 7.2W -240 LED per meter,(2 wire, IP-65)

with non integral suitable Driver complete Cat-lll

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with

following type accessories Cat. III

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC

pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(C) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

42 armoured cable complete with out going tails, 10.00 38.38 Each

insulating tape etc for following size of cables. (B)

to 4 core 6 Sq. mm

Sr.No. Item Description Quantity Total Rate Unit Amount

S.I.T.C. submersible pump set suitable for bore of

150 mm. dia. or more having three phase motor

capacity not more than 5 H.P. with following

43 capacity . Lifting and Lowering taken extra. (A) (8 1.00 33330.00 R.Mt.

stage) 240 to 200 LPM discharge at 70 to 78 mtrs.

head respectively suitable for 50mm dia. delivery

Supplying and erecting Direct on line starter with

30 Amp. (resistive @ 230v) power relay and with

to 5/ 4 to 10 / 8 to 20 amp. Range C.T. Operated

electronic overload relay in engineering grade

plastic enclosure for 3 ph 415v 50 HZ A.C. motor up

to 7.5 HP with high voltage protection (above

v) and under voltage protection (below 330 v)

current sensing single phasing protection. Reverse

phasing protection, inverse current characteristic

overload protection with indication for On, OL,

HV,LV SPP in a single unit with feather touch start /

stop push button, high temperature with standing

Bakelite terminals complete erected on P.W. Block

with necessary connection. [Cat.II]

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (E) Under Water

Light,12V DC including Driver,IP-67 with die-

cast/deep drawn housing with impact resistance

clear toughened glass. (ii) 12 watts Cat-lll

Sr.No. Item Description Quantity Total Rate Unit Amount

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in

approved manner as directed (a)20 mm

Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.(e)

1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Pipe type earthing having

150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth

wire.For using salt and charcoal / coke as required

for pipe type earthing.

For using salt and charcoal / coke as required for

pipe type earthing.

Supply of approved make frp/grp pole having followiing

specifications : FRP/GRP pole made by centrifugal moulding process

using thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one pieceand

tapered round in shape,having smooth outside surface finish and

should be totally fre from corrosion as well as non conductive and

shock proof. Pole should be provided with FRP/GRP base bracket

dully fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D

792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 ‐55.0%, 3. Water absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D

790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐50MPa. Pole

should be flame retardant as per IS 6746.Resin used shall be UV

51 resistance and pigmented. Pole should be painted with first coat of 10.00 8723.37 Each

epoxy primer and then two coat of highly weather resistance

polyurethen paint to ensure proper addhesion of the

paint.Minimum thickness shall be 80 to 100 micron.Defelection of

the pole shall not exceed more than 10.0 % of the length of the

pole for the given load.Pole should be generally made as per the

dimensional data,performance criteria and some interchagebility

features of poles as per the standard ANSI C123.20 latest version of

ASTM D 923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with foundation

, Anchor Base & Internal junction box as per the manufacturer

details and site requirement . (1) 'A' class frp/grp pole suitable for

base plate mounting [B] Overall Length of 4.0 meter, Average

thickness : 4mm, Top/Bottom Outside Dia. 76/143mm +/‐2.Weight

of Pole 10.0 Kg approx. (Without base) Metal Anchor Base dully frp

claded (Size : 290 Ø * 12mmthk , Mounting hole PCD 240mm *

nos. of 16 Ø hole)

Providing 1:2:4 cement concrete foundation &

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below ground

52 level with plinth of 45 cm x 45 cm (or 45 cm dia x 10.00 809.01 Each

45 cm) high upper ground level with necessary

curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Sr.No. Item Description Quantity Total Rate Unit Amount

Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob &

53 hinged doors as per requirement having locking 10.00 898.90 Each

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (A)

300mm x 200mm x 100mm [deep]

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)(C) Post Top Lantern

LED fitting comprises of finish cast aluminum spigot

and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto

terminal block.IP 65(ii)32-40WCat-lll

Sr.No. Item Description Quantity Total Rate Unit Amount

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged

double door internally supported on both side,

with internal and outside looking arrangement with

55 look and keys in duplicate 35 x 35 x 5 mm M.S. 1.00 16691.26 Each

Angle of Two Nos. one is welded and other with nut

and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as

per IP 55 test & followed by IS 2147 of 1962 (A)

X 90 X 75 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 95 cm long

made from 40 X 40 X 6 mm thick MS angle.

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

56 setup time 1 minimum & LCD display. Also 1.00 3168.37 Each

comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

IP67 Waterproof AC to DC Converter, 10A 120W /

57 110V to 12V Converter, AC 110V-220V to DC 120W 1.00 1368.55 Each

Switching Converter

I / we agree to carry out the above work at __________% above the estimated rate put to tender

I / we agree to carry out the above work at __________% below the estimated rate put to tender.

Estimated amount Estimated amount

Put to tender Rs. 32,52,348.00 Put to tender Rs.

Net amount Rs.___________________ Net amount Rs.______________________

Sr.No. Item Description Quantity Total Rate Unit Amount

Contractor Sign With Seal Ankleshwar Nagar Palika