PROVN OF CERTAIN SANCTIONED B/R AND E/M WORKS UNDER GE (S) TEZPUR (PHASE-I).

Amount

Surface dressing not exc 15 cm deep in soft/loose soil ,completeall as specified and as directed.

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide on plan in soft/loose soil and getting out ,complete all as specified and as directed.

Surface excavation n. exc. 30cm deep and avererging 15cm deep and getting out ,completeall as specified and as directed.

Removing excavated soil to distance n'exc 50 mtr and deposited all as specified and as directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as specified and as directed.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete ,completeall as specified and as directed.

M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc ,completeall as specified and as directed.

M&L sand filling under floor or in foundations or in trenches including watering and consolidation complete all as specified and directed.

M&L hard core of gauge n'exc 63 mm of broken boulder below Path ,complete all as specified and as directed.

M & L Damp proof course 40 mm thk in PCC 1:2:4 type B-0 to horizontal or vertical surface ,complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

M & L formwork to sides and soffits of lintels, lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide ,completeall as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded aggregate as in foundation. base for column, plinth beam atc ,complete all as specified and as directed by Engineer-in-charge.

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in column, post etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm graded agg) as Lintel/chajjas etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm graded agg) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

S&F TMT bars 5mm and over up to and including 10mm dia in stirrups, spacers and binders bent to shape required, including binding with mild steel wire (annealed) not less than .9mm dia ,complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including binding with mild steel wire (annealed) not less than 0.9mm dia ,complete all as specified and as directed.

S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified & directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section all as described.

S&F 200 mm long,aluminium,anodised, barrel tower bolts of extruded section all as described.

S&F 300mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as directed.

M&L for extruded aluminum alloy handle fabricated type of 150 mm long ,complete all as specified and as directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed ,complete all as specified and as directed.

S&F for MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

S&F Floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor overall length 140mm complete all as specified

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers ,complete all as specified and as directed.

M & L cement concrete tye D-2, 1:4:8 ( 40 mm graded aggregate ) 75 mm thick as in sub base of floors ,complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels up to 1.5m clear span, cills,steps,and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60cm height,copings,kneelers,apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

M&L 20-25mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing up to desired satisfaction of Engr In Charge complete all as specified and directed.

M&L machine cut kota stone slab 20-25mm thick as in skirting, risers of steps laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.(Screed bed to be measured & paid separately)

M&L for chequrred cement concrete tile 20 cm x 20 cm x25 mm thick set jointed and pointed in neat cement slurry in floors, with grey cement and pigment ,complete all as specified and as directed.

M & L rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:4 finished fair and smooth without using extra cement.omplete all as specified

M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately.)

M&L 5 mm thick plastering on ceiling concrete surface in cm (1:3) even and smooth without using extra cement ,complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layers of CM 1:6 for laying chequrred tiles ,complete all as specified and as directed.

Supply only water proofing compound ,complete all as specified and as directed.

M&L 25mm th PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in flooring, finished fair and even ,complete all as specified and as directed.

M & L 15mm thick screed bed or bedding layer in cement mortar1:6 for laying floor finishes, finished even and fair complete all as specified.

M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L for Polythene film,150 micron thick, laid on a coat of bitumen primer, @ 0.30 to .50 kg per sq. m ,complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in path/paving's finished rough and laid in alternate bays to receive chequrred tile all as specified and directed.

Forming Construction (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A ,complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, steel peg stays complete with glazing bars dovetailed or welded, complete all as specified and directed.

S&F steel windows without glazing bar but with FI/Z section for fixing of gauge and steel handles, steel peg stays, complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete all as specified and directed.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0 .5 sqm each pane complete all as specified.

M & L 3mm thick figured glass n.exc. 0 .5 sqm each pane glazing with oil putty complete all as specified.

S&F galvanized mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed in position.

M & L applying three coat of white wash on newly plastered wall surface including preparation of the surface complete all as specified.

M & L applying three coat of white wash on newly plastered of ceiling surface including preparation of the surface complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius built in half brick built in CM 1:4 complete all as specified and directed.

M & L applying for two coats of colour wash over a coat of white wash on newly plastered or unplastered wall surfaces including preparation of surfaces, complete all as specified.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

M&L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

S&F mild steel framed work conforming to Fe-290 (Gde E-165), as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc.

S&F MS Hold fast confirming to Fe-290 Gde E-165 ,complete all as specified and as directed.

Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for riveted in forged into spikes, framed guard bars, railing and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F anodised aluminum snap grid frame work of 605x605mm size for false ceiling all as specified and directed.

M & L 6mm thick non asbestos fibre cement building board fixed/inserted to timber/GI/Aluminium frame work with screws, as in ceiling ,complete all as specified and as directed.

M & L applying two coat of oil bound distemper on wall surfaces including preparation of surfaces, complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer ,complete all as specified and as directed.

S&F 2nd class hard wood shutter 35mm thick plain framed, panalled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated.

S/F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a) ,complete all as specified and as directed.

Taking down cement plaster on brick/concrete surfaces of walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc ,complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work with using WPC (as per manufacturer's instruction) finished even & smooth without using extra cement ,complete all as specified and as directed.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth without using extra cement( WPC for finishing layer will be measured and paid separately as supply only).

M & L for two coats of exterior emulsion antifungal paint over a coat of primer over a coat of 1mm thick wall care putty to wall including complete including preparation after complete removal of existing treatment as specified and directed

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 350mmx450 mm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mmx300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R) bend ,complete all as specified and directed.

S&F 110mm bore P.V.C (S.W.R)T junction equal or unequal ,complete all as specified and directed.

S&F 110mm bore P.V.C vent cowl ,complete all as specified and directed.

S&F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and directed.

Taking down existing damaged IWC/EWC along with complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :-(i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of 85/25 Gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then plastering of polythene film, 150 micron, natural colour with cold cut back adhesive.(iii) Fixing of 25mm dia GI pipe (med Gde) spout of length 45 cm.(iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or pedestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete in Mix 1:5:10 ,complete all as specified and directed.

M&L for taking down of existing Roof treatment from roof and fence and covering surface of old concrete roof by picking , sweeping clean and washing down with water remove dust, etc and applying roof treatment with the following specifications: (a) Rendering 15mm th in cm (1:4) fixed with water proofing compound as per manufacturers instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plaster surfaces for 7 days by ponding water over the roof (leveling course) (b) Applying evenly one coat of cold bituminous primer conforming to IS- 3384-1088@ 0.30 liter per sqm on th cleaned plastered surfaces (c) Applying layer of APP based polymeric membrane 3mm th (minimum) weighing 3.50 kg per sqm (reinforced with polyester non woven fabric weighing not less than 160 gms per sqm by torch application . The overlap shall not less than 100mm on the reverse direction and 75mm longitudinal direction and sealing overlaps. (d) Applying evenly one coat of aluminum paint of 0.10 ltr sqm over APP based polymeric membrane.

Preparation of concrete roof surfaces applying roof treatment as under:- (a) Applying bituminous primer @ 0.30 liter per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b) Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE) (c) Laying of APP Modified water proofing membrane with non-woven polyester Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer's instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bituminous aluminum paint @ 0.10 litre/SM (Super Silver shield of STP Ltd or equivalent as approved by GE)

M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured separately) ,complete all as specified and directed.

Material and labour for point wiring for one light/call bell/fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn with PVC casing/capping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunk cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet cover all as specified and directed. (a) one light/fan/bell point controlled by one, one way switch.

All as per Item No 93 but one socket outlet 5 pin 6 amps on independent board.

All as per Item No 93 but one 5 amps socket outlet on same board with other switch.

Material and labour for point wiring 2.5 sqmm including 1.5 sq mm PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one 3/5 pin 15 Amps socket out let on independent board ,completeall as specified and directed.

Supply and fix Modular switch one way 6 Amp ,completeall as specified and directed.

Supply and fix Modular switch one way 16 Amp ,complete all as specified and directed.

Supply and fix modular type electronic fan regulator ,complete all as specified and directed.

Supply and fix modular socket outlet 2 in 1, 3 pin 6 A ,complete all as specified and directed.

Supply and fix Modular socket outlet 16 Amps ,complete all as specified and directed.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals ,complete all as specified and directed.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V ,complete all as specified and directed.

S&F Switch flame proof rotary type with termination box in LM6, 25A, double pole 250V ,complete all as specified and directed.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth ,complete all as specified and directed.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250V, 2P+earth ,complete all as specified and directed.

Supply and fixing modular metal flush box 1 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 2 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 3 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 6 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 8 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 1 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing LED fitting 20 watts high efficiency environmental friendly long life mounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti stranded flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make-Crompton,Havells,Surya,Bajaj,Phillips.

Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size ,complete all as specified and directed.Make-Crompton,Havells,Surya,Bajaj,Phillips.

Supply and fix sheet metal enclosures SPN DB's 8 way double door when MCBs to be used 415 Volts, all as specified and directed.

Supply and fix sheet metal enclosures TPN DB's 4 way when MCBs to be used 415 Volts, double door all as specified and directed.

S & F MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replacement of MCB SPN 240 Volts, 50-63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ,breaking capacity 10KA, C series all as specified and directed.

Supply, install, testing and commissioning of ceiling fan 1200 mm sweep complete all as specified and directed. Make :Havells Model Spark Deco or equivalent in Crompton, Bajaj

Supply and fix exhaust fan Single phase 230/240 V of size 300 mm sweep metal body heavy duty turbo HHDEF 900 RPM all as specified and directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply, laying in repair in trenches of XLPE UG cable insulated aluminum stranded conductor served with an inner sheathing or PVC tape heavy duty armoured up to 1100volts (earthed) GI steel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core testing complete all as specified and directed.

Supply, laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured up to 1100volts (earthed) GI steel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 2 core testing complete all as specified and directed.

S&F in replacement steel water tubing 50 mm dia of bore light grade galvanized with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

S&F galvanized steel water tubing 40 mm dia to wall/pole of bore light grade with all fittings arrangement to fix with pole ,complete all as specified and directed.

M & L for earthling complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanized earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanized iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge.

M/S Deep-Jeet

M/s Brahamaputra Wood Industries

D G Corporation

DRISTEE ASSOCIATES

Anil Kumar Sarmah