Implementation Of Diversity Enrichment Activities at the Designated Green Space Near Eloor Police Station- Eloor Municipality, Ernakulam District

CIVIL WORKS

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate40mm nominal size derived from natural sources)

4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)

50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer 's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

50.2.25.1 Filling with contractor's own earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

16.78.2 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

10.16.2 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

OD351895/2025-2026 Supplying and fixing machine finished granite stone sitting bench of 1.5 m length, slab thickness not less than 50 mm, 450 mm clear height from ground level, 450 mm wide sitting slab, 450 mm wide back rest including cost of conveying and unloading

30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.4.1 Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

30.2.8 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)

30.2.9 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

OD358643/2025-2026 Supply and stacking of plant Tabernaemontana coronaria (Chandni single) veriegated of height 105-120 cm., multibranched, bushy in big size HDPE bag

30.2.14.3 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep

30.2.57.1 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

OD358618/2025-2026 Engraving letters in hard stone for granite 100x75 cm size name board for inauguration including granite name board and letters erecting and fixing charges etc complete approved by the Engineer in charge

OD351904/2025-2026 Supplying and fixing Aluminium 3D Channel Letters with cutout Shape ACP with LED light including back side letter frame work etc., all complete as per direction of Engineer in charge

OPEN GYM EQUIPMENTS

OD351906/2025-2026 ABB TRAINER- Providing and fixing ABB Trainer - FFE025 (Make FUN PLAY) using, minimum 80 NB GI B-class pipe for main frame, minimum 32 NB GI B-class pipe for side frame, minimum 25 NB G.I. pipes for intermediate pipe, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer & dash; jotun Brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat including cost of concrete foundation , all materials, labor, etc., all complete as per the instruction of Engineer in-charge

OD351907/2025-2026 CHEST PRESS CUM SHOULDER PRESS- Providing and fixing Chest press cum shoulder press - FFE007 (Make FUN PLAY) using, minimum 100 NB GI C-class pipe for center frame, minimum 40 NB & amp; 32 NB GI B-class pipe for main frame, minimum 32 NB & amp; 25 NB GI B-class pipe for handle frame, minimum 32 NB & amp; 25 NB & amp; 40 NB GI B-class pipe for connecting pipe, LLDP Roto molded seat with inbuilt bolts 3/8 & quot; X 1.5& quot; for seat & amp; back rest, nylon 66 injection molded bearing cap & amp; pipe cap, fully done by first coat of primer & dash; jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness powder coat including cost of concrete foundation , all materials, labor, etc., all complete as per the instruction of Engineer in-charge

OD351908/2025-2026 FUN CYCLE- Providing and fixing Fun cycle - FFE024 (Make FUN PLAY) using, 25 NB & amp; 40 NB GI B-class Pipe for main frame, 32 NB GI B-class pipe for seat frame, 25 NB GI B-class pipe for handle frame, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer & dash; jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat including cost of concrete foundation, all materials, labor, etc., all complete as per the instruction of Engineer in-charge

OD351909/2025-2026 STEP TRAINER- Providing and fixing Step trainer - FFE002 (Make FUN PLAY) using, minimum 100 NB G.I. C class pipes for main frame, minimum 40 NB G.I. pipe for foot rest pipe, minimum 40NB & 25 NB G.I. pipe for handle, minimum 25 NB & 40 NB GI B-class pipe for connecting pipe, LLDP roto molded seat with inbuilt bolts 3/8" X 1.5" for foot rest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer & dash; jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labor, etc., all complete as per the instruction of Engineer in-charge

OD351910/2025-2026 ONE SEATING CUM TWO STANDING TWISTER- Providing and fixing One seating cum two standing twister - FFE018D (Make FUN PLAY) using, minimum 100 NB GI C-class pipe for main frame, minimum 25 NB GI B-class pipe for handle frame, LLDP roto molded seat with inbuilt bolts 3/8 & quot; X 1.5" for twister disc, minimum 25 NB & 20 NB GI B-class pipe for seating frame, minimum 80 NB GI B-class pipe for seating frame stand, minimum 80 NB GI B-class pipe for twister stand, minimum 25 NB GI B-class pipe for twister handle frame, LLDP plastic- twister disc, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer & dash; jotun Brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat including cost of concrete foundation, all materials, labor, etc., all complete as per the instruction of Engineer in-charge

CHILDRENS PLAY EQUIPMENTS

OD351937/2025-2026 BUCKET SPINNER - Providing and fixing good quality Childrens play item Bucket Spinner FPSP04, including cost of foundation, all materials, labor, conveying, unloading etc., all complete as per the Direction of Engineer in charge

OD351938/2025-2026 AEROPLANE RIDER - Providing and fixing good quality Childrens play item Aero plane Ride FPSR01, including cost of foundation, all materials, labor, conveying, unloading etc., all complete as per the Direction of Engineer in charge

OD351939/2025-2026 DELUXE MULTI SEE SAW - Providing and fixing good quality Childrens play item Deluxe Multi See-Saw FPSS02, including cost of foundation, all materials, labor, conveying, unloading etc., all complete as per the Direction of Engineer in charge

OD351940/2025-2026 JUMBO 4 SEATER MGR - Providing and fixing good quality Childrens play item Jumbo 4 Seater MGR FPMGR06, including cost of foundation, all materials, labor, conveying, unloading etc., all complete as per the Direction of Engineer in charge

OD351941/2025-2026 DOUBLE POST SWING - Providing and fixing good quality Childrens play item Double Post Swing FPSW05, including cost of foundation, all materials, labor, conveying, unloading etc., all complete as per the Direction of Engineer in charge

ELECTRIFICATION WORKS

90.12.7.40 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.1 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD351942/2025-2026 Supplying and fixing outdoor Pedestal type Feeder pillar meter box made out of 16 gauge powder coated sheet with clear coat, fitted with 25 A 2P MCB Isolator (1no) , 32 A Fuse with HRC (1no) 25A 2P 30 MA RCCB (1no) MNX 9 2P contractor (1no), 10 A SP MCB (3no) , etc., all complete as per the direction of Engineer in charge

OD351944/2025-2026 Supplying and fixing following complete Cast Iron 2.5m height ornamental pole, minimum weight 110kg, including the cost of conveying, loading, unloading, erection charge ,foundation bolt, plate, 2.5sqmm wire, etc., all complete as per the direction of Engineer in charge

OD351943/2025-2026 Supplying and fixing 45w LED top light on existing Cast iron pole including labour, fittings etc., all complete.