PROVN OF TOILET WITH BATH ROOM AND SEPTIC TANK AND SOAKAGE WELL AND DRAIN AND PROVN OF ELECTRIC WATER HEATER AND SECURITY LIGHTS AT MIL STN DAHRCHULA

Amount

DESCRIPTION OF ITEMS

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth in hard/ dense soil for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, laying of pipe etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Excavation over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation over areas exc 1.5 m deep but n.exc 3.0m and getting out in hard/dense soil complete all as specified and as directed.

Excavation over areas 3.0 m deep but n.exc 4.50m and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well rammed in layers n exc 25 cm in excavated soil complete all as specified and as directed.

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated soil n.exc. 50 m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed.

Removing excavated soil exc. 250m but not exc 500m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed.

M & L hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stones complete all as specified and as directed.

M & L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregates in foundation, filling and mass concrete complete all as specified and as directed.

M & L for plain cement concrete 1:2:4 type D2 using 40mm graded aggregates in foundation, filling and mass concrete complete all as specified and as directed.

M & L providing PCC 1:2:4 type B1 (20 mm graded stone aggregates) in bed block, cills, plinth courses, lacing courses and the like including weathering, slightly rounded for chamfered angles and throating, coping including necessary formwork complete all as specified and as directed.

M & L providing RCC 1:2:4 type B1 (20 mm graded stone aggregates) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, lacing courses and the like including weathering, slightly rounded for chamfered angles and throating, including necessary formworkcomplete all as specified and as directed.

M & L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M & L for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed.

M & L for brickwork with subclass 'B' bricks in one brick thick honey comb walling, built in cement mortar 1:6 complete all as specified and directed .

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening complete all as specified and as directed.

S & F aluminium anodised barrel tower bolts of extruded section and fixed 150mm size complete all as specified and as directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250mm size complete all as specified and as directed.

S & F Butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed

S & F Extruded aluminium alloy handles, fabricated type., anodised 100mm size

S & F for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, welding etc, in framed guard bars, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and as directed.

M & L mild steel Bands, straps, hold fasts; wall ties; hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15cm and not exc 22.5cm long, diameter of shank 11 to 15mm complete all as specified and as directed.

M & L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L mild steel TMT bars 8mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia

S & F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 Gde E-165 complete all as specified and as directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specified and directed.

S & F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for 75mm thick PCC 1:3:6, type C-2(40mm garded stone aggregate), as in pavings/hard standing/path/Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified & directed.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M & L cement concrete 75mm thick 1:2:4 type B1 (20mm graded stone aggregate) as in floor and making impressions of expanded metal, whilst the concrete is green, complete all as specified and directed.

M & L for cement concrete 40mm thick 1:2:4 type B1 (20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M & L for glazed, joint free coloured ceramic tiles 350x250x7mm/ 450x350x7mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering on cement concrete masonry work in CM 1:4 complete all as specified and directed.

M & L for non skid, joint free, coloured ceramic tiles 7 to 8mm thick (square/ rectangular) are of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces of wall with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M & L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of cement base primer on walls complete all as specified and directed.

S & F Figured glass 3mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed.

M & L for preparing newely steel and iron surfacesof any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M & L for preparing newely steel and iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

S & F steel water tube 15mm bore size, medium grade galvanised, with all fitting laid in trenches complete all as specified and directed.

S & F steel water tube 15mm bore size, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for cutting existing steel tubing 20mm bore for alterations or additions (Each cut measured), screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) necessarily done in position without taking down complete all as specified and directed.

S & F PVC Rotational moulded polyethylene, triple layered water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as complete all as specified and directed.

S & F 15mm bore bib tap cast copper alloy CP with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F 15mm bore angle stop valves cast copper alloy CP with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore stop valves cast copper alloy CP with long shank with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S & F 15mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F towel rail 60cm long of PTMT fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts length 600mm complete all as specified and directed.

M & L for PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M & L for PVC (SWR) pipes 75mm dia, single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M & L for PVC (SWR) bend 110mm dia with acess door

M & L for PVC (SWR) bend 75mm dia with acess door

M & L for PVC (SWR) branch piece single (tee) 110mm dia with acess door

M & L for PVC (SWR) vent cowl 110mm dia

M & L for PVC (SWR) floor trap 75mm dia outletplain with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F vitreous china WHB, white, flat back, size 550mm x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling and PVC waste pipe complete all as specified and directed.

S & F vitreous china squatting pan orissa pattern, size 580x440 mm white with integral foot rest (excluding flushing cistern and flush pipe including provn of lime concrete bedding ,trap etc complete all as specified and directed.

S & F PVC, low level flushing cistern with complete fitting incl float valve flush pipe bracket for flush etc 10 ltrs capacity including flush pipe of ployethylene of low or high density pvc 32 mm dia complete all as specified and directed.

S & F Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and directed.

S & F soap tray brass chromium plated complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B1 using 20mm graded aggregates in surface channels and drains complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregates in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match inluding neccesary form work complete all as specified and directed. (Reinforcement shall be measured and paid saparetly)

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped end etc.

Use and waste form work to sofit of suspended slab such as roof slabs, floor slabs, landings and similar work n.exc 200mm thick complete all as specified and directed.

M&L loose filling with aggregates of broken bricks of gauge 80 to 150mm in soakage wells complete all as specified and directed.

S & F Mild steel work in wind ties, including securing bolts and posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including round MS bars etc embedded in concrete/masonry complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F PVC (SWR) pipes 150mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M & L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 concrete for 150mm dia drain pipes complete all as specified and directed.

M & L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in concealed PVC surface conduit 20mm or higher dia , complete with all accessories /fitting and Ist class hard wood (Shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.00 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed (a)One light point/Fan point/bell point controlled by one way switch of 5/6 Amps

One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps but with cables 2.5 Sqmm size

All as per item 81 herein above but with 4 Sq mm cable for one 15 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F switch piano, flush button, single pole, one way, 5 Amps 240 volts complete all as specified and directed.

S & F switch piano flush button single pole one way 15Amps complete all as specified and directed

S & F socket out let 3 pin 5/6 Amps flush type complete all as specified and directed

S & F socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps , flush type, non shutters, non interlocking complete all as specified and directed

S & F lamp holder PVC/ Polycarbonate type with back plate suitable for angular/ batten fittings complete all as specified and directed

S & F ceiling rose surface type, bakalite, 3 terminals complete all as specified and directed.

Supply & fix LED tube light 4' long along with all fixtures and fittings ,internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size ,18W complete all as specified and directed.

Supply & fix LED tube light 2' long along with all fixtures and fittings ,internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size ,7/9W complete all as specified and directed.

S & F LED retrofit lamp 7 watts complete all as reqd site and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed.

Supply and fix testing and commissioing of Water heater storage type, electric,capacity 25 litres, BEE 5 star rated with grouting with four nuts and bolts complete with all assessories and chromium plated flexible two number pipe connection for hot / cold water supply complete all as specified and directed.

Supply and fixing of MCB single pole 16 amps 230 volts complete all as specified.

Supply, laying, testing and commissioning XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, served with inner sheathing of PVC tape armoured with galvanised steel wire overall PVC sheathed 1100 volts grade, cross-sectional area 16 Sqmm 2 core complete all as specified and as directed by Engr-In-Charge. (Note: - Excavation & earth work, sand cushioning bricks protection & GI pipe where reqd. shall be measured & paid separately).

Supply and erection, in truly vertical position, LT Steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 SP 31 09 mtrs long Class -10 including painting of poles with two coats of synthatic enamel paint in black and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles complete all as specified and directed. (Note : PCC, Earth work and MS work as cross arms clamps etc shall be measured and paid separately)

Supply and fixing and testing complete aesthetically Designed SMD LED Street light luminaires of 45 watts System wattage for energy saving having IP-66 degree of protection ,With minimum system efficiency as > 85 % ,made of Pressure die cast aluminum housing powder coated in graphite grey and heat resistant thoughned glass with excellent thermal management including PVC cable connector. LED's should have lens optics and vandal proof prismatic poly carbonate covers for ensuring efficient optics and uniform distribution of light. Fitting should have operating voltage range of 120 - 270 VAC , THD <10% , P.F >.95 .The fitting should have in built surge protector of 5 KV, complete all as specified. Make : Havells, Phillips, C&G

Supply & Fixing of bracket made out of 40 mm bore light grade GI pipe bent to shape fixed as bracket suitable for street light fittings not less than 1.2 m long bent/welded to shape including necessary nut, bolt and clamp-02 No made of MS flat 40x5mm as reuired duly painted by unscrewing nut and bolts complete all as specified and directed.

Supply & fixing of 1100 volts grade heavy duty round cable with PVC insulated aluminiuum conductor served with an inner sheating of PVC tape and overall PVC sheathed in service connection wire twin core 4sqmm solid conductor complete all as specified and directed.

S&F of factory made weather proof outdoor pole mounted MCB kiosk box made out of not less than 1mm thick MS sheet size not less than 250x200x100mm with and including MCB SP 10 Amp, 240 V 'C' series 10 KA and bus bar including fixing with two FI clamp 25x3mm including washer nut bolt etc duly painted complete all as specified and directed.

M & L for GI pipe light grade 40mm for cable protection etc all as specified and directed.

M&L for Sand cushioningng (dry sand) to under ground cable for cable protection provided with layers 8cm thick before laying and 15cm thick after laying the cable and punned down to 18 cm thickness complete all as specified and directed. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 18cm as mentioned in para19.75 of SSR Part-I

Supply and laying sub class B bricks old size for protection of cables laid lengthwise perpendicular to the axis of cable, adjecent to each other complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed.

SK Traders Sons