Up-gradation of Civil Hospital Naraingarh From 50 bedded to 100 bedded alongwith residential accommodation in Ambala District CM Announcement Code No 10020 (Pdg. Additional HVAC System).

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer Electrical Division PWD B&R Br., Ambala Cantt

Name of Work: Up-gradation of Civil Hospital Naraingarh From 50 bedded to 100 bedded alongwith residential accommodation in Ambala District CM Announcement Code No 10020 (Pdg. Additional HVAC System).

Name of the Bidder/ Bidding Firm / Company :

Sl. No. HSR Items / Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 [23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm [Through Rate] BI01010001010000000000000515BI0100001113 130 Metre 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 [23.23.6.4]MISCELLANEOUS 6.4. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 600 X 50 X 2 mm [Through Rate] BI01010001010000000000000515BI0100001114 95 Metre 2 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

3 [24.1.12]EARTHING AND LIGHTENING ARRESTOR 12. Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required. [Through Rate] BI01010001010000000000000515BI0100001115 75 Metre 3 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

4 [24.13.18]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 18. 10 Sq mm 4 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001116 150 Metre 4 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

5 [24.13.6]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 6. 4 Sq mm 4core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001117 25 Metre 5 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 [24.13.88]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 88. 240 Sq mm 3.5 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001118 75 Metre 6 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

7 [25.1.4]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 4. 150mm dia. [Through Rate] BI01010001010000000000000515BI0100001119 24 Metre 7 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

8 [25.1.6]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 6. 100mm dia. [Through Rate] BI01010001010000000000000515BI0100001120 210 Metre 8 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

9 [25.1.7]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 7. 80mm dia. [Through Rate] BI01010001010000000000000515BI0100001121 320 Metre 9 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

10 [25.1.8]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 8. 65mm dia. [Through Rate] BI01010001010000000000000515BI0100001122 60 Metre 10 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

11 [25.3.3]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 3. 200mm dia. [Through Rate] BI01010001010000000000000515BI0100001123 10 Each 11 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

12 [25.3.6]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 6. 100mm dia. [Through Rate] BI01010001010000000000000515BI0100001124 3 Each 12 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

13 [25.7.1]Supply, installation, and commissioning of factory/site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 1. Thickness 0.63 mm sheet [Through Rate] BI01010001010000000000000515BI0100001125 300 Sqm 13 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

14 [25.7.2]Supply, installation, and commissioning of factory/site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 2. Thickness 0.80 mm sheet [Through Rate] BI01010001010000000000000515BI0100001126 400 Sqm 14 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

15 [25.7.3]Supply, installation, and commissioning of factory/site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 3. Thickness 1.00 mm sheet [Through Rate] BI01010001010000000000000515BI0100001127 450 Sqm 15 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

16 Providing and fixing in position industrial type SS pressure gauges having dial size 100 mm complete with SS syphon and cock. Make :- Fiebig / H Guru BI01010001010000000000000515BI0100001128 27 Each 16 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

17 Providing and fixing in position the automatic purging valves 25 mm dia Make : Rapid Cool / Anergy BI01010001010000000000000515BI0100001129 5 Each 17 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

18 Supplying and fixing of powder coated extruded aluminium Supply Air Grills / diffusers with aluminium volume control dampers as per specifications. Make : Swirl Air/ Systemair/Carryair BI01010001010000000000000515BI0100001130 35 Sqm 18 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

19 Supplying and fixing of powder coated extruded aluminium return Air Grills / diffusers without volume control dampers as per specifications. Make : Swirl Air/ Systemair/Carryair BI01010001010000000000000515BI0100001131 35 Sqm 19 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

20 Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Make : Swirl Air/ Systemair/Carryair BI01010001010000000000000515BI0100001132 4 Sqm 20 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

21 Supplying and fixing of Fresh air intake louvers with bird screen and dampers (Aluminium extruded only). Make : Swirl Air/ Systemaire/Carryair BI01010001010000000000000515BI0100001133 8 Sqm 21 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

22 Supplying and fixing of duct insulation with insulation `O` class anti microbiol density 32 Kg/m³. Applied by Adhesive, conforming to standard specification. 9 mm thick closed cell Nitrile rubber (indoor application).Make : Armacell/K-Flex/Arma Flex BI01010001010000000000000515BI0100001134 350 Sqm 22 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

23 Supplying and fixing of duct insulation with insulation `O` class anti microbiol density 32 Kg/m³. Applied by Adhesive, conforming to standard specification.13 mm thick closed cell Nitrile rubber (indoor application).Make : Armacell/K-Flex/Arma Flex BI01010001010000000000000515BI0100001135 1150 Sqm 23 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

24 Earth Station as per ISI Specification. BI01010001010000000000000515BI0100001136 1 Supply, installation, testing and commissioning of Pot - Strainer (sspl) of the following sizes conforming to standard specification.250 mm dia with foundation 24 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

25 Miscellaneous civil work BI01010001010000000000000515BI0100001137 1 Supply, installation, testing and commissioning of Pot - Strainer (sspl) of the following sizes conforming to standard specification.250 mm dia with foundation 25 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

26 Supply, installation, testing and commissioning of factory fabricated Fan Coil units complete with valve package and cordless remote of Capacity 1000 CFM (2.5TR) Complete in all respect upto entire satisfaction of Engineer in charge of work. Make : Zeco / Edgetech / Citizen BI01010001010000000000000515BI0100001138 4 Each 26 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

27 Providing and fixing in position the following MS `C` class pipes, DIA 25 MM cut to required length and installed with welded joints, providing and fixing all necessary fittings such as bends, elbows, tees, reducers, flanges, sockets BI01010001010000000000000515BI0100001139 65 Metre 27 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

28 Providing and fixing in position dial type mercury-in-glass filled industrial thermometers/ digital, complete in all respect upto entire satisfaction of Engineer in charge of work: Make :- Fiebig / H Guru BI01010001010000000000000515BI0100001140 10 Each 28 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

29 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 200 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001141 90 Metre 29 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

30 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 150 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001142 35 Metre 30 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

31 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 125 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001143 15 Metre 31 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

32 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 100 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001144 175 Metre 32 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

33 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 80 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001145 270 Metre 33 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

34 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 65 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001146 64 Metre 34 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

35 CHILLED WATER PIPE INSULATION: Providing and fixing in position the following DIA 25 MM Chilled water piping insulation including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001147 85 Metre 35 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

36 Providing and fixing in 25mm dia position the following balancing valves (PN-16) complete in all respect upto entire satisfaction of Engineer in Charge of work. . BI01010001010000000000000515BI0100001148 4 Each 36 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

37 Supply, installation, testing and commissioning of Cap 3000 CFM, Static pressure 80 mm of WC, Cooling Coil : Deep 6 Row, Filteration 10 Micron outgoing factory fabricated Double Skin Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.63 mm pre-plasticized/pre-coated Galvanized steel sheet outside and 0.63 mm plain Aluminium sheet inside . with blower, blower section and Blower shall be DIDW forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, Multi Row deep cooling coil made of Aluminium finned Copper tube with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% , stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. The AHU panels shall be insulated with 48±2 mm thick and 38 Kg/m³ density PU foam. The motor and blower assembly shall be mounted on Aluminium extruded section. The complete AHU shall conform to standard specification and with 3 way modulating valve, thermostat/sensor etc. complete in all respect: Make : Zeco / Edgetech / Citizen. BI01010001010000000000000515BI0100001149 1 Each 37 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

38 SITC of 20TR, 50mm PIBCV/High-Rangeability Control Valves/Delta-T Valves - for AHU Control valves for FCU/CSU/AHU of sizes upto 32mm dia shall BI01010001010000000000000515BI0100001150 6 Each 38 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

39 be 2way high rangeability/PIBCV type of Brass construction of PN25 rating with screwed connections. The valve shall be rotary/ball type with rangeability of more than 300, Control valves for air handling units of sizes above 32 mm dia shall be 2way high rangeability/PIBCV type of Cast Iron construction of PN16 rating with flanged connections. The valve shall have linear stroke of minimum 15mm and rangeability of more than 300, The actuator shall be electronic motorised modulating type operating on 24VAC and 0-10Vdc or 4-20 mA control signal. The actuator shall have provision for 0-10Vdc position feedback signal and manual operation. It shall be possible to operate the valve manually and the actuator shall switch back to auto mode when power supply is restored. The valve actuator housing shall have IP54 protection, The actuator should be suitable for a valve close-up pressure of 1.5 times the pump head or a minimum of 4 bars, Flow Rate/size, complete in all respect upto entire satisfaction of Engineer in Charge of work: Make - ANERGY/Belimo/Siemens. BI01010001010000000000000515BI0100001151 1 Each 39 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

40 SITC of Temperature Controller The temperature controller shall be electronic microprocessor based with display working on 24 VAC with 0-10Vdc output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil complete in all respect upto entire satisfaction of Engineer in Charge of work: Make - ANERGY/Belimo/Siemens BI01010001010000000000000515BI0100001152 2 Each 40 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

41 SITC of Electronic Temperature Controller for FCU`s The thermostat for fan coil unit shall be electronic type with integrated minimum 3inch LCD Display, ON/OFF, 3 FAN SPEED and HEAT/FAN/COOL switches. The thermostat shall operate on 230 V mains voltage and shall be suitable for operating 2 position motorized 3/2 way mixing/diverting valve . The thermostat shall have a precalibrated NTC thermistor and shall be suitable for operation in the range of 15 -35 C with a switching differential of 1 C. All thermostat shall be fitted on standard mounting plate as recommended by the manufacturer. Complete in all respect upto entire satisfaction of Engineer in Charge of work: (Make - ANERGY/ Belimo/Siemens). BI01010001010000000000000515BI0100001153 1 Supply, installation, testing and commissioning of Pot - Strainer (sspl) of the following sizes conforming to standard specification.250 mm dia with foundation 41 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

42 Supplying installation. Testing and Commissioning of floor-mounted desk type Control Console in Ac plant room containing various indications and controls for the AC system comprising of 2 Nos chilling machine. 4 Nos. pumps, 2 Nos cooling tower. 18 Nos AHU/CSU with test push buttons facility. The panel shall be fabricated from minimum 1633 thick M.S. Powder coated sheet of approved design. The AC module of the Central Control shall have the following accessories Status indication (ON, OFF) for each compressor for each chilling machine and all pumps. Push Buttons and Indication lamps for remote start and stop and status indication for each of the AHUs Push Buttons and indication lamps for remote start and stop and status indication(ON, OFF and Fault) for each of the 3 Nos. Cooling Tower motors and low-level indication for each of 3Nos cooling tower Hooter and Flashing lamps to indicate operation of any safety shut down with necessary contractors, accept, reset and test push buttons complete as per specifications to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work. Make as per attached list. BI01010001010000000000000515BI0100001154 2 Each 42 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

43 HU Distribution Panel INCOMERS I Nos MCCB as per following details/ specification 250 A. 35kA. TPN MCCB with in-built protection relays such as over load release, earth fault release, magnetic short circuit, auxiliary contacts, ROH, Spreaders and padlock facility shall contain the following Voltmeter of 0-500V with VSS and one set of (RYB) phase indicating lights with 6A SP MCB Indicating lamps shall be protected by 6A MCB to indicate ON, OFF, TRIP for MCCB 0-500 amps 96 x 96 sq mm ammeter with 500/5 amps resin cast CT`s and selector switch 1 set of under voltage relay BUSBAR 375 ?. 35 ??, ??N Aluminium busbar duly sleeved 1 set Maximum density of aluminimun bus bars for current carrying capacity shall be one amp per square mm. Outgoings 12 nos TP MPCB, 40-63 A for AHU Motor Panel as described above and in drawings BI01010001010000000000000515BI0100001155 175 Set 43 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

44 Supply installation testing and commissioning of Insulated condensate drain water piping of PVC complete with fittings like elbows, tees, reducers bends, MS flanges, supports, etc as required conforming to standard specifications and of following sizes (a) 25 mm dia pipe BI01010001010000000000000515BI0100001156 210 Set 44 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

45 Supply, installation testing and commissioning of Insulated condensate drain water piping of PVC complete with fittings like elbows, tees, reducers bends, MS flanges, supports, etc. as required conforming to standard specifications and of following sizes (a) 32 mm dia pipe BI01010001010000000000000515BI0100001157 2300 Set 45 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

46 Supply and Erection of PVC insulated Copper armoured cable of size 1.5 Sqmm x 6 Core 1100 Volts grade as per drawings to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work BI01010001010000000000000515BI0100001158 1 Each 46 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words