Allied Works for the existing Canning Bus Terminus at Canning, in the Dist. of South 24 Parganas --- E.I. Works for suficient Compound illumination inside the Campus and for Internal wirings at the existing Building and other allied works.

Amount

S&F of 3 nos. 415 V., 200 A. porcelain type kit kat fuses with 1 no. 415 V., 100 A. neutral link on suitable size of good quality 12mm thickness Hylem sheet incl. S&F of suitable size of ply board, fixed on wall by fust nuts etc. as per direction of E.I.C. (Havells/ Currency).

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (L&T/ Siemens) a) 125 A.

Supplying and fixing 415V. TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (L&T/ Havells) a) 160 A.

S&F of 415 V. FP MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DB and necessary connection. (Legrand/ L&T/ Siemens/ ABB). A)125 A..

S&F of 240 V. /415 V. MCB of Breaking capacity of 10kA & C characteristics on din rail of existing DBs and necessary connection a required. (Legrand/ L&T/ Siemens/ ABB).

6-25 A. SP MCB (at existing SPN DBs & TPN DBs)

10 A. DP MCB (at existing Feeder Pillar)

25 A. DP MCB

32 A. TP MCB

32 A. FP MCB

63 A. TP MCB

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Brand approved by EIC) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board embedded in wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] a) Average run 8 mtr

Distn. wiring in 3x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V. 5A. 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. i. On Board

S&F PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required as per GS.

20 mm dia

25 mm dia

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works. i. 13 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. i. 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Laying 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid pipe and making necy. connection as required.

3 x 1.5 sq.mm. (for Sep. 6 A. points and for Looping wires of Poles)

2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. as ECC (for Combined Boards & Sep. 16 A. Boards)

2 x 4 sq.mm. (For DP MCBs inside Feeder Pillar Box)

2 x 6 sq.mm. (For Interconnecting wires inside SPN DBs)

2 x 6 sq.mm. + 1 x 4 sq.mm. as ECC (For SPN DBs)

4 x 10 sq.mm. (For Timer DB & For Interconnecting wires inside TPN DBs & Feeder Pillar Box)

4 x 10 sq.mm. + 2 x 6 sq.mm. as ECC (For TPN DBs)

4 x 25 sq.mm. (From Meter to Cut outs & From Input Main Switch of Feeder Pillar to Busbar of Feeder Pillar)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

S&F of 240 V., 6A., plug socket with Piano key type switch (Anchor-Penta) - 2 sets on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

S&F of 240 V., 20A., plug socket with separate 20 A. Piano key type switch (Anchor-Penta) - 1 set with 240 V., 6A., plug socket with Piano key type switch (Anchor-Penta) - 1 set on sheet metal switch board embedded in wall incl. S & F 200x150x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

S&F of 240 V., 3 nos. 6 A., & 1 no. 20 A. plug socket with separate 3 nos. 6 A. & 1 no. 20 A. Piano key type switch, indicator & 10 A. switch type SP MCB (Anchor Penta) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (Combined Board).

Supply & Fixing 240 V., 20 A., plug socket with separate 20 A. Piano key type switch (Brand approved by EIC) - 1 Set on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required

S&F sheet metal inspection box (16 SWG) of the following sizes flushed in wall after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

300 mm x 200 mm x 65 mm

240 mm x 200 mm x 65 mm

200 mm x 150 mm x 65 mm

175 mm x 100 mm x 65 mm

150 mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws.

300 mm x 200 mm x 65 mm

240 mm x 200 mm x 65 mm

200 mm x 150 mm x 65 mm

175 mm x 100 mm x 65 mm

150 mm x 100 mm x 65 mm

Supply and delivery of Twin LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency > 105 & <120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

Supply and delivery of Single LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency > 105 & <120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

S&D of 4' long 230V. 18 W. PC body/ Al. body T-LED Tube light on existing Tube fittings incl. necessary connections. (Philips - Mas LEDTube 1200mm 18W865 T8 I – 2100lm/ CG - LTB-20-865-(2)/ Bajaj)) with 3 years warrenty.

Fixing only lamp

Cost of changing the connection of existing fluorescent Tube Light Set and make it suitable for LED Tube light by using Co's own tools & tackles incl. taken down those fittings and refixing them as per direction of E.I.C..

Fixing only single/twin Tube light fitting complete with all accessories Directly on wall/ceiling with suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing only single/twin Tube light fitting suspended 25 cm below the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts as per GS. incl. necy. connection by 2 x 1.5sqmm. flexible copper wire of 1.10 mt. length.

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing Socket type fan regulator (Step type) (Anchor-penta make) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply & delivery of 1200 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc.with safety wire & PS2 type capacitor, as directed by EIC. [Make-Orient - Summer cool (1200 mm Metalic Bronze Copper) or similar spec of Crompton/Usha - Striker 1 Star (Safety Wire & S3/P2 Capacitor)]

Supply & delivery of 1400 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc.with safety wire & PS2 type capacitor, as directed by EIC. [Make-Orient - Summer cool (1400 mm Metalic Bronze Copper) or similar spec of Crompton/Usha - Striker 1 Star (Safety Wire & S3/P2 Capacitor)]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod and making necessary connection by 2x1.5 sqmm flexible copper wire.

Supply & Fixing of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp as per EIC (Make-Havells Cat no.LED ADORE PLUS 9W B22 CDL 3 STAR LAMP, Philips/Crmpton)

Supply and delivery of 230V 300mm (12") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty, Usha, CG, Bajaj or equiv Make]

Fixing only following exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as required and providing necy. length of PVC insulated wire and making connection as per GS.

12" dia Exhaust Fan

S&F of GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh with good quality net at bottom on wall by necy. bolts & nuts (6 mm dia x 62 mm long).

12" dia Exhaust Fan

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

Supply & Delivery 10W LED bulk head light fitting on wall/ceiling as per EIC. (Make - Havells or Equivalent spec. of Philips/Crompton/Bajaj)

Fixing only bulk head light fitting on wall /ceiling by screws etc.

S&D of 230 V., 15 W. Square shaped surface mounted LED panel. PDC aluminium housing and high translucent frosted plastic diffuser provides soft-light and glare free symmetrical illumination. (Havells-PLUTOSURFACE1X1PLS15WLED840S or equivalent of Philips/ CG ).

Fixing only square shaped LED Panel on ceiling by screws etc. incl. necessary connection.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar as per GS.

Connecting the equipments to earth busbar including S & F following size GI (Hot Dip) wire on wall/floor with staples buried and making connection to equipments as per GS.

S&F of suitable size of timer box, consisting with 1 no. 415 V., 32 A. FP MCB, 1 no. 32 A. 4 pole Power contactor, 1 no. 230 V., 6 A. SP MCB, 1 no. 10 A. toggle switch, 1 no. Digital timer clock, 1 no. 20 A. push on/ off type starter for manual operation, 4 nos. Inditating lamps etc. incl. suitable size of interconnecting wires (power line drawn by 10 sq.mm. copper wire & control & indicating circuit drawn by 1.5 sq.mm. copper wire with copper sockets) as reqd. as per direction of E.I.C..

S&D of the following sizes 1.1 KV voltage grade XLPE/PVC insulated Al./ Copper Armoured/ un-armoured Cable. (Make: Havells/ Polycab/ Finolex/ KEI).

4 core x 16 sq.mm. Al. armoured cable. (for Compound lights)

4 core x 70 sq.mm. Al. armoured cable. (for Interconnection of Panel Portion)

3 core 4 sq.mm. Copper Armoured cable. (for Shed Area)

3 core 2.5 sq.mm. Copper un-armoured cable. (for Flood lights connection on Metal Sign Board)

Laying of following cables on wall/surface incl. S & F MS saddles & earthing attachments, making holes etc. as necy. mending good damages and painting.

4 core x 16 sq.mm. with 2 nos. 10 SWG GI (Hot Dip) Wire

4 core x 70 sq.mm. with 2 nos. 10 SWG GI (Hot Dip) Wire

3 core 4 sq.mm.

3 core 2.5 sq.mm.

Laying only following Cable through existing GI Pipe.

4 core x 16 sq.mm.

3 core 4 sq.mm.

Laying of cable as below after cutting floor/pavement/wall and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

4 core x 70 sq.mm. Al. cable at an average depth of 100 mm in floor/pavement/wall etc.

Laying of following cable in UG trench 460 mm wide x 760 mm average depth, with proper brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

4 core x 16 sq.mm.

S&F of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC insulated cables as below.

4 core x 16 sq.mm.

4 core x 70 sq.mm.

3 core 4 sq.mm.

3 core 2.5 sq.mm.

Finishing the end of following XLPE/PVC insulated Al. armoured cables by crimping method incl. S&F of solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

4 core x 16 sq.mm.

4 core x 70 sq.mm.

S&F of following size medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

32 mm dia

40 mm dia

Cost of Cutting Channel of size (50 mm x 125 mm) on RCC floor by Electric operated cutting machine and other required tools & tackles incl. providing those tools and tackles and mending good damages to original finish after necessary works, as per direction of E.I.C..

S&D of 80 mm dia x 1.5 mts. long GI Pipe pole (ISI-Medium) with 1 no. 3 mm thick G.I sole plate incl. necy. holes on sole plate as required, welded with pipe pole and Erection the pole by providing cement concrete (6:3:1) muffing around the pole of dimension 600x600x600 mm on the roof of the building after chipping the roof and fix the pole on the position by using fust nuts incl. 3mm thick net cement finish and providing G.I. earth bolt after making hole by drilling etc. on pole incl. painting the pole by 2 coat Aluminium paint over 1 coat RO Primer after cleaning the surface by emery paper as per direction of E.I.C..

S&D of 9.0 mtr. Long Swagged type ST Pole of following specifications: (Shubham/ Kolkata Poles/ Utkarsh/ Bajaj) Designation - 410-SP-32 Overall Length - 9.0 mtr. Weight - 154 kg.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

S&F of single arm header fabricated with 100 mm dia, 3 mm thick & 10" height G.I. pipe (pole cap) welded with 1.5 mtr. long 40 mm dia. 3 mm thick G.I. pipe at an angle of 20 to 25 deg with horizontal axis by using nuts, bolts washers etc. incl. painting by 2 coat Aluminium paint over 1 coat RO Primer after cleaning the surface by emery paper as per direction of E.I.C..

S&D of 230 V. 40-45 W. LED outdoor light fittings, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics, of following specifications (Philips/Havells/CG/Bajaj or equivalent) with i. IP66 protection ii. 10 KV SPD included iii. Efficacy ≥110/120 LPW.

S&D of 230 V., 90 W. LED outdoor type light fittings, made with pressure die cast housing with toughened glass and high power LED's with secondary optics, of following specifications (Philips/Havells/CG/Bajaj or equivalent) with i. IP66 protection ii. 10 KV SPD included iii. Efficacy ≥110/120 LPW.

Fixing only the LED outdoor Light fittings on pole by Co's own tools & tackles incl. necessary connection as required with earthing as per direction of E.I.C..

S&D of 230 V., following wattage LED outdoor type Flood light fitting, made up of pressure die cast aluminium housing with toughened glass and high power LED's with secondary lenses, of following specifications with 5 years warrenty. i. IP66 protection ii. 10 KV SPD included iii. Efficacy ≥110/120 LPW. iv. CCT - 5500-6000 K.

300 Watt. LED Flood light fitting (for Outdoor Lighting). (Philips/Havells/CG/Bajaj or equivalent)

150 Watt. LED Flood light fitting (from Building roof). (Philips/Havells/CG/Bajaj or equivalent)

55-60 Watt. LED Flood light fitting (for Shed area). (Philips/Havells/CG/Bajaj or equivalent)

100 Watt. LED Flood light fitting (for Metal Sign Board). (Philips/Havells/CG/Bajaj or equivalent)

350 Watt. LED Flood light fitting (for High Mast).(Philips/Havells/CG/Bajaj or equivalent)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

S&F of GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V. 16 A. kit-kat fuse unit, one NL on porcelain insulator and earthing terminal with lug, on wall by fust nuts, washers etc. as required including painting with anticorrosive paint.

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V. 15 A. kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for PVC insulated Al. armoured cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

S&Laying of 13 mm dia 3 mm thick heavy gauge Polythene Pipe through poles with S& Laying GI fish wire for drawing looping wires. (from Loop Box to Outdoor light fitting).

Supplying and fixing 415V. TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

S&F of 415 V., 32 A. din type HRC fuse in existing open execution type Main Switch of Feeder Pillar. (L&T - HF 32 A. - SF90142/ Siemens).

Replacement of following items of existing Main Feeder Pillar Box in place of damaged one incl. necessary connection as required as per direction of E.I.C..

S&F of 0-500 V. Digital Voltmeter (L&T WL132010OOOO/ AE)

S&F of 0-5 A. Digital Ammeter (L&T WL131010OOOO/ AE)

S&F of 65/5 A. C.T. (L&T/ AE)

S&F of LED Indicating Lamp (R, Y & B) (L&T/ AE)

S&F of 230 V., 10 A. Sliding fuse. (L&T/ AE)

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole.

1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.

One coat of red lead/Zinc chromate priming

1st coat of aluminium paint over one coat of RO priming.

2nd coat of aluminium paint over 1st coat

Cost of 1.5 mtr. long adjustable Arm bracket, made by 40 mm x 40 mm x 6 mm MS angel, welded one side with existing body of Metal Sign Board for holding the LED Flood light fittings incl. painting of it by 2 coat Aluminium paint over 1 coat RO primer, as per direction of E.I.C..

Cost of Servicing, full cleaning and Overhauling of Exinting 12 mtr. Heighted High Mast incl. greesing, mobiling etc. of the rope, pully system, motor etc. as required by Co's tools & tackles and make it functionable as per direction of E.I.C..

Cost of repairing of the existing damaged winding of Motor of High Mast after opening the Motor's body part by part by using Co's tools & tackles incl. S&F necessary copper wire (36 SWG or/& 40 SWG) with proper insulation and other necessary materials as required and refixing same as per direction of E.I.C..

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2) Total is rounded off to the nearest rupees.

M/S. TOAD TO TOWER

BANERJEE CONCERN

PUSPA ELECTRIC

R.N.ROY ELECTRICAL CONTRACTOR