CA NO GE U AMB 35 2021 22 REPAIR MAINT OF SOLAR WATER HEATER CHLORONOME PLANTS VALVE PITS DGS AND MISC ITEMS IN SECTOR C UNDER GE U AMBALA CANTT

Amount

Servicing of DG set 500 KVA Make:- Cummins, in all respect. installed at SYL water supply installation including replacement of following parts (spares shall be measured and paid separately under respective items of schedule) and refixing and testing complete all as specified and directed by Engr-in-Charge. Note (a) Spares parts required for replacement shall be measured and paid for separately under respective items here in after as supply only. (b) Labour cost for fixing parts shall deemed to be included in the unit rate of quoted. (c) Repair shall be carried out by authorised workshop of reputed manufacturer.

Supply only Fuel filter Assy

Supply only Lub oil filter Assy

Supply only Air cleaner element (inner and outer)

Supply only V Belt

Supply only Coolant Super Plus , 20 Ltr

Supply only Hose pipe for vent

Supply only Fuel pipe return hose

Supply only Hose for engine water out connection

Supply only Hose for engine water in connection

Hose for balance water pipe supply only

Supply only Suction hose for Engine

Supply only Engine oil 20W40 castrol

Servicing of DG set 400 KVA Make:- Kirloskar in all respect, installed at SYL water supply installation including replacement of following parts( spares shall be measured and paid separately under respective items of schedule) and refixing and testing complete all as specified and directed by Engr-in-Charge. Note (a) Spares parts required for replacement shall be measured and paid for separately under respective items here in after as supply only. (b) Labour cost for fixing parts shall deemed to be included in the unit rate of quoted. (c) Repair shall be carried out by authorised workshop of reputed manufacturer.

Supply only Fuel filter Assy

Supply only Lub filter Assy

Supply only Fuel pre filter

Supply only Air cleaner element (inner and outer)

Supply only V Belt

Supply only Coolant Super Plus , 20 LITRE

Supply only Hose pipe for vent

Supply only Fuel pipe return hose

Supply only Hose for engine water out connection

Supply only Hose for engine water in connection

Supply only Hose for balance water pipe

Supply only Suction hose for Engine

Supply only Engine oil 20W40 castrol

Servicing of DG set 125 KVA Make:- Cummins in all respect, installed at SYL water supply installation including replacement of following parts( spares shall be measured and paid separately under respective items of schedule) and refixing and testing complete all as specified and directed by Engr-in-Charge. Note (a) Spares parts required for replacement shall be measured and paid for separately under respective items here in after as supply only. (b) Labour cost for fixing parts shall deemed to be included in the unit rate of quoted. (c) Repair shall be carried out by authorised workshop of reputed manufacturer.

Supply only Fuel filter Assy

Supply only Lub filter Assy

Supply only Lub filter assy

Supply only Air cleaner safety element (inner & outer)

Supply only V Belt

Supply only Coolant Super Plus , 20 Ltr

Supply only Flex hose for vent

Supply only Fuel pipe return hose

Supply only Hose for engine water out connection

Supply only Hose for engine water in connection

Supply only Hose for balance water pipe

Supply only Suction hose for Engine

Supply only Engine oil 20W40 castrol

Disconnecting and removing the radiator assy from DG set of capacity 500 KVA and transporting it to the workshop to carry out the repair/overhauling, descaling the radiator tubes and fins by circulating descaling solution, bracing the damaged/leaking radiators tubes,welding the top and bottom tank complete and making it leak proof. Reinstalling in position connecting and testing installed at SYL. Note: Spares parts required for replacement will be measured and paid for separately under respective items of schedule. Labour for fixing parts is included in the unit rate of items. Make as per existing.

Description all as per srl item No 4 above but of capacity 400 KVA -ditto-.

Description all as per srl item No 5 here in before but of capacity 125 KVA. Make as per existing.

Dismantling Self Starter assy of DG of capacity 500 KVA set taking to the workshop if required and reassembling the same after servicing and overalling complete all as Engineer-in-Chage.

Supply and fixing in replacement Armature of Self starter complete

Supply and fixing in replacement Pinion of Self starter complete

Supply and fixing in replacement Clutch assy of Self starter complete

Supply and fixing in replacement Carbon brush set of Self starter complete

Supply and fixing in replacement Copper Field coils of Self starter complete

Supply and fixing in replacement Ball bearing of Self starter as per sample complete

Dismantling Self Starter assy of DG of capacity 400 KVA set taking to the workshop if required and reassembling the same after servicing and overalling complete all as Engineer-in-Chage.

Supply and fixing in replacement Armature of Self starter complete

Supply and fixing in replacement Pinion of Self starter complete

Supply and fixing in replacement Clutch assy of Self starter complete

Supply and fixing in replacement Carbon brush set of Self starter complete

Supply and fixing in replacement Copper Field coils of Self starter complete

Supply and fixing in replacement Ball bearing of Self starter as per sample complete

Dismantling Self Starter assy of DG of capacity 125 KVA set taking to the workshop if required and reassembling the same after servicing and overalling complete all as Engineer-in-Chage.

Supply and fixing in replacement Armature of Self starter complete

Supply and fixing in replacement Pinion of Self starter complete

Supply and fixing in replacement Clutch assy of Self starter complete

Supply and fixing in replacement Carbon brush set of Self starter complete

Supply and fixing in replacement Copper Field coils of Self starter complete

Supply and fixing in replacement Ball bearing of Self starter as per sample complete

Material and labour in replacement of old MCCB with new MCCB 4P, 415 Volts, 200 Amp, 36 KA complete all as specified and directed.

All as per item No 10 here in before but of 250 Amp

All as per item No 10 here in before but of 100 Amp

M & L dismantling the solar water heating system of 100/200 LPD capacity completely for replacing worn out/deteriorated accessories and refixing solar water heater including necessary connection and testing complete all as specified and directed by Engr-in-Charge. Note: (Accessories will be measured & paid separately).

Description all as per item No. 13 here in before but solar water heating system of 300/400/500 LPD capacity.

Description all as per item No. 13 here in before but solar water heating system of 1000 LPD capacity.

Description all as per item No. 13 here in before but solar water heating system of 2000 LPD capacity.

Opening the collector and providing chemicals for descaling the system with proper equipment complete and refixing the same for 100/200 LPD as specified and directed by Engr-in-Charge. Note: One job is considered as one complete solar water heating system and quoted rate shall include the said provisions.

Description all as per item No. 17 here in before but solar water heating system of 300/400/500 LPD capacity.

Description all as per item No. 17 here in before but solar water heating system of 1000 LPD capacity.

Description all as per item No. 17 here in before but solar water heating system of 2000 LPD capacity.

Supply & fixing in replacement Nut, bolts and washers of 32 mm length and 6 mm dia.

Supply & fixing in replacement Hose pipe of 100 mm length suitable for 20 mm bore GI pipe.

Supply & fixing in replacement Electric heater element upto 3 KW rating, single phase, 240 Volts.

Supply & fixing in replacement Toughened glass of collector of standard size, thickness 4 mm.

Supply & fixing in replacement Neopin gasket .

M & L repair to collector by drilling & welding of fins, round flange incl welding & copper tube soldering complete all as directed.

M & L cladding of existing GI pipe of 20 mm dia by replacing insulation Rockwool 2” thick with density 50 Kg/cum, chicken wire mess, aluminium sheet of 26 gauge thickness and steel screws including complete all as directed.

Taking out and reassembling the solar water heating system, connecting including one coat of painting with syntheic enamalled paint on complpete water heating system with approved colour and testing complete all as directed.

M & L in replacement of stainless steel hot water tank of capacity 100 ltr with comlete insulation over/inside the surface of rectangular/cylinderical type suitable for existing system as per specified and directed by Engr-in-charge.

Same all as per ser. item no 29 above but for capacity 200/300 ltrs.

Same all as per ser. item no 29 above but for capacity 400/500 ltrs.

M&L in replacement of old collector of cap 100LPD solar heating system suitable for existing system as per specified and directed by Engr-in-charge.

M&L in replacement of make up steel tank of cap 5 ltr suitable for existing system as per specified and directed by Engr-in-charge.

Supply and fixing in replacement of thermostat Suitable for existing system as per specified and directed by Engr-in-charge.

Supply, laying in replacement & testing in trenches GI pipe 20 mm dia medium grade ISI marked with all fittings including earth work or laying under PCC floor or fixed to wall complete all as specified and directed.

M&L in replacement of XLPE insulated armoured heavy duty electric cable with alluminiun conductor,1100 Volts grade, 4 Core, 16 Sq.mm cross sectional area including earth work or laying under PCCfloor or fixed to wall complete all as specified and directed by Engr-in-Charge.

All as per item no. 36 but of size 25 Sq.mm, 3.5 core

All as per item no. 36 but of size 35 Sq.mm, 3.5 core

S&F 20 Watt LED fitting in replacement surface and wall mounted, extruded Alumininum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including flexible wire for electrical connection and testing. complete as specified and directed by Engr-in-Charge.

S&F in replacement SMPS Battery, tubular type, 12V, 180AH maintenance free and 2Yrs warranty with suitable charger complete as specified and directed by Engr-in-Charge.

Dismanteling the UNSV sign board in Sector 'C' from different pump house area, Supply and fixing of retro reflector board of size 4'x3' with high quality retro reflector tape green base high intensity prismatic sheeting (HIP) grade white retro tape cutting good quality with 3mm thick ACP sheet base including 40mm x 40mm square size MS pipe legs and all around the board appx 18 feet incl welding the MS flat plate of size 25mm x 3mm across the board appx 10 feet including grouting the sign board in PCC 1:2:4 complete all as specified and directed by engr-in-Charge.

M&L dismantelling and opening of Gravity feed type chloronome plant for repairing and making the same functional including fixing of parts installation, testing & commisioning complete all as specified and directed by Engr-in-Charge. (a) Spares parts required for replacement shall be measured and paid for separately under respective items here in after as supply only. (b) Labour cost for fixing parts shall deemed to be included in the unit rate of quoted. (c) Repair shall be carried out by authorised workshop of reputed manufacturer.

Supply only Teflon pipe 9.5mm dia with PVC nuts and nipple 5 mtr length

Supply only Primary filter with moisture nut and tube

Supply only Diaphram S.S. pressure guage

Supply Glass Moisture trap

Supply only Rubber Washer for moisture trap tube

Note :- Amount of credit of Rs. 40110.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

sanjeev enterprises

M/S Sonu Traders