RequiredOEM Authorization Certificate Bid to RA enabled No Laundry Type Washing Machines/Drying Machines ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) TYPE Type of Machine Washer with Dryer Extractor Washer with Dryer Extractor Type of Usage of Machine Domestic Domestic Number of Duty Cycles per day - Nominal 10 * Type of Mounting Portable with Castor Wheels Portable with Castor Wheels Drive Type Direct Drive Direct Drive Number of Tubs/Cont Single Container Single Container 1/5 ainers/Drums Container/Drum Position Horizontal Horizontal Type of Laundry Loading Front Load Front Load Laundry Processing Fully Automatic Fully Automatic Type of Heating Electrical Heating Electrical Heating Steam Source NA NA Provided with coin currency operated Timer No No Material of Top Panel Plastic Plastic Material of side Panel Plastic Plastic WASHER Washer System Pulsator/Impellor Type Pulsator/Impellor Type Rated capacity of Washer (in kg) 6 - 6.9 6 - 6.9 "Washer Drum Volume 3000 * "Washer Drum Dia 250 * "Washer Drum Height Length 500 * Material of the Washer Drum Stainless Steel Stainless Steel "Number of Preset Wash Programmes 15 * "Normal Washing and Rinsing Cycle time 45 * Provided with Automatic Detergent dispensor with liquid soap pump/dosing meter NO NO DRYER Type of Dryer Spin Dryer with Heating Spin Dryer with Heating Type of Tumble Dryer Vent Type Vent Type Rated capacity of Dryer (in kg) 6 - 6.9 6 - 6.9 Dryer Drum Volume 3000 * "Dryer Drum Diameter " 250 * "Dryer Drum Height Length" 500 * "Dryer Spin Speed in rpm" 1000 * 2/5 Material of the Dryer Drum Stainless Steel Stainless Steel Spin Speed Selection Yes Yes Provided with Hot Air Blower No No "Exhaust Blower/Fan motor Power Rating" 230 * Air Flow Rate (in cubic meter/hour 0 * "Number of Preset Dryer Programmes" 15 * "Normal Drying Cycle time" 45 * Steam Consumption (in kg/hour) 250 * GENERIC "Electric Heating Power Rating" 250 * Minimum Water inlet Pressure 4 * Maximum allowed Hardness (CaCO3) of inlet water (ppm) 100 * "Steam Pressure" 4 * Temperature Control Selection Yes * Noise level 59 * connectivity NA * Electrical Safety Provisions as per IS : 302 latest Yes * Net Weight 73 * Overall Dimensions (mm x mm x mm) - * Features/Functions Functions Pre Wash
RequiredTub Wash
RequiredRinse Only
RequiredSpin Only
RequiredRinse and Spin
RequiredGentle Wash
RequiredTurbo Wash
RequiredQuick Wash
RequiredWater Efficient Wash
RequiredNormal Wash
RequiredHard Wash
RequiredChild Lock
RequiredLint Filter * POWER SUPPLY Power Supply Single Phase
Required50 Hz Single Phase
Required50 Hz Working Voltage 230 ± 10% V AC 230 ± 10% V AC Number of Motors 1 * 3/5 Power Rating of each motor (kW) - * BEE Star Rating 4 4
Required5 Or higher INSTALLATION & COMMISSIONING/STC Installatiion and Commissioning as per STC Inclusive in the scope of Supply * Agreed to the STC of the Product YES * GUARANTEE WARRANTY Minimum Rated Life Cycles 4000 4000 Warranty on Equipment 2 2
Required3
Required4
Required5
Required6
Required7
Required8
Required9
Required10 Or higher Warranty on Electric Motor (s) 2 2
Required3
Required4
Required5 Or higher CERTIFICATION Availability of Test Reports from Central Govt/NABL approved/ILAC accredited Lab to prove the Minimum Guaranteed Life Cycles
Requiredetc Yes Yes If Yes
RequiredTest Report to be furnished to the Buyer on demand YES * Test Report No and Date - * Name of the Lab and Address - * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
