Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical I 437 BLOCK NO 10 RANGOLI GARDENS VAISHALI NAGAR VILLAGE TOWN KANAKPURA CITY JAIPUR JAIPUR RAJASTHAN 302012 INDIA | JAIPUR | RAJASTHAN | 302012 | Accepted-Technical The bidder is Technically Qualified |
| 2 | Accepted-Technical | Accepted-Technical The bidder is Technically Qualified |
| 3 | Accepted-Technical | Accepted-Technical The bidder is Technically Qualified |
Tender Value
₹45.8 L
EMD Value
₹91,600
Closing Date
26 Sept 2026, 3:00 pmClosed
Executive Engineer (Civil)
Executive Engineer (Civil) Construction and Maintenance Division IIT Hyderabad, Kandi, Sangareddy-502284
Providing Interior Works for Civil Engineering Department at IIT Hyderabad Kandi Sangareddy Telangana
2026_IITH_926825_1
IITH/CMD/CIV/2026-27/NIT-23
Open Tender
Civil Works
Item Rate
150 days
Construction and Maintenance Division IITHyderabad
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹91,600
29 Sept 2026
18 Sept 2026
28 Sept 2026
18 Sept 2026
26 Sept 2026
18 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 0x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws@ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | |||||
| 1.01 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | 55.76 | Sqm | - | - |
| 2Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. | |||||
| 2.01 | With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) | 190.29 | Sqm | - | - |
| 3 | Providing and fixing gypsum board ceiling design work in vertical drop/projection not exceeding 200 mm in depth, measured in running metre, comprising G.I. framework of approved sections with necessary perimeter channels, intermediate channels and supports, clad with 12.5 mm thick gypsum plaster boards of approved make, including cutting, shaping and forming of the required design, screw fixing, jointing with jointing compound and paper tape, treatment of screw heads and joints, finishing with suitable putty and primer, and all necessary accessories, supports, fasteners, labour and incidental works, complete in all respects as per approved drawings/design, manufacturer’s specifications and as directed by the Engineer-in-Charge. | 140 | RMT | - | - |
| 4 | Providing and fixing wall panelling with 18 mm thick IS 710 grade marine plywood backing/packing of approved make, finished with approved make and shade of 1.0 mm thick decorative laminate of matte or glossy finish, including necessary framework, adhesive, edge lipping, screws, fasteners, fixtures, cutting, fitting, jointing and all necessary materials, labour, tools and accessories, complete in all respects as per approved design/drawings and as directed by the Engineer-in-Charge. | 34.8 | Sqm | - | - |
| 5 | Providing and applying approved make and shade of interior/exterior-grade decorative texture paint system on ceiling, including surface preparation by cleaning and removal of loose paint, filling of cracks, holes and minor undulations, application of one coat of approved texture coating, one coat of suitable primer/sealer and two coats of approved make and shade of finish paint, including all materials, labour, scaffolding, tools and necessary accessories, complete in all respects to achieve a uniform, smooth and even finish, as per manufacturer’s specifications and as directed by the Engineer-in-Charge. | 92.94 | Sqm | - | - |
| 6 | Providing and fixing white acoustic gypsum panels of approved make, of minimum size 1.20 m × 2.10 m and 12.5 mm thick, having suitable acoustic perforated/fissured surface and factory-applied white finish, fixed to a suspended G.I. framework comprising main channels, intermediate/cross channels, perimeter channels and necessary suspension/hanger arrangements, including G.I. screws, fasteners, clips, joint treatment, cutting and fitting around light fittings, AC diffusers and other services, edge finishing and all necessary accessories, materials, labour, scaffolding and incidental works, complete in all respects as per approved drawings/design, manufacturer’s specifications and as directed by the Engineer-in-Charge. | 18 | Nos | - | - |
| 7 | Providing and applying two coats of approved make and quality wall putty over prepared interior surfaces, followed by one coat of suitable approved primer and two coats of approved make and shade of acrylic emulsion paint, such as Asian Paints Royal Matt or equivalent, to achieve a uniform, smooth and even finish, including surface preparation, cleaning, sanding, filling of cracks, holes and minor undulations, providing, erecting and dismantling all necessary scaffolding, labour, materials, tools and all associated works; including painting of doors in the specified areas with suitable approved make and type of paint, complete in all respects as per manufacturer’s specifications and as directed by the Engineer-in-Charge. | 1,022.3 | Sqm | - | - |
| 8 | Providing and applying one coat of approved make suitable metal primer and two coats of approved make and shade of matte enamel paint on metallic ceiling, including thorough surface preparation by cleaning, removal of loose paint, rust and foreign matter, wire brushing, scraping and sanding of the existing surface, making good minor surface defects, providing, erecting and dismantling all necessary scaffolding, and including all materials, labour, tools, brushes, rollers and other accessories required for proper application, complete in all respects to achieve a uniform, smooth and even finish, as per manufacturer’s specifications and as directed by the Engineer-in-Charge. | 381.04 | Sqm | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_973955.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .