Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
11 Aug 2026, 11:00 pm
Karnataka Power Corporation Limited
VENKATESH G
8277502863
Replacement of HPSV fittings with LED fittings and replacement of failed cables from Con 9A1B1 to 13AB conveyors of CHP-1 RTPS
KPCL/2026-27/PS/WORK_INDENT4493
KPCL/2026-27/PS/WORK_INDENT4493
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer CHPE1 Office RTPS Raichur
8 documents required · 4 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
The intending bidder should have satisfactorily completed as a prime contractor, at least one similar work such as Supply, erection and commissioning of LED fittings, of value not less than Rs. 12.50 lakhs in the last five years (2021-22, 2022-23, 2023-24, 2024-25 and 2025-26) in any thermal power stations. As a proof of this, the bidder should upload a single work order and corresponding work done certificate issued by the Competent authority. (Work done of Previous years shall be given weight of 10% per year to bring them to the present price level of the financial year).
Intending Bidder shall be Class-I or above electrical contractor. As a proof of this, valid Electrical license issued by competent authority of Govt. of Karnataka shall be furnished.
The intending bidder in his name should have achieved an average annual financial turnover of Rs. 24.98 Lakhs in any two financial years during the last five years (2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). As a proof of this, the bidder shall upload the certified copy of the Profit and Loss or Turnover certificate duly certified by the chartered Accountant. (financial turnover of previous years shall be given weight of 10% per year to bring them to the present price level of financial year).
₹530
₹50,000
27 Jul 2026
27 Jul 2026
13 Aug 2026
5 Aug 2026
6 Aug 2026
Replacement of HPSV fittings with LED fittings and replacement of failed cables from Con 9A1B1 to 13AB conveyors of CHP-1 RTPS
Laying of cable in Existing trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT cable -2.5 to 25 sq.mm.
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coat...
Supply of 70W LED Well Glass fitting, Pressure die cast aluminium, IP66, IK 08 110 LM/W, with cradle and eyebolt, Power factor 0.95 or more, Operating Voltage Range 140V - 280V AC, 50Hz Protection- Ov...
Supply of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% an...
Supply of Stainless steel, nickle plated Double compression gland suitable for 3CX2.5 Sqmm, Copper Flexible cable.
Supply of Stainless steel, nickle plated Double compression gland suitable for 3CX6 Sqmm, Aluminum Armoured cable.
Supply of Stainless steel, nickle plated Double compression gland suitable for 3.5CX25 Sqmm, Aluminum Armoured cable.
DIN rail for mounting MCB, TB material: steel with brass coating for rust resistance Size: Breadth x Depth x Thickness = 35MM X 7MM X 1.5MM
Supply of Terminal blocks 6sqmm
Supply of Terminal blocks 25sqmm
Supply of 25 sqmm Pin/Ring type Aluminium lug
Supply of 6 sqmm Pin/Ring type Aluminium lug
Fixing of MS/Die cast aluminium Junction box with Terminal strip, DIN mounting rail, fasteners and allied accessories. Fixing angle iron frame work fabricated out of M.S. angle iron and M.S. Flat with...
Releasing of existing installed light fittings, damaged cables, junction boxes, cable glands, MCB, MCCB, TPST/TPN, Change over switch, Lighting panel, Metal socket set of 2 pole and earth plugs mounte...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
TENDER DOCUMENT.pdf
Tender Document • 0.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].