Widening and strengthening works in two lanes from 0.00 to 39.665 in Bindrabazar Chiraiyakot Belthararoad SH-149

Amount

Excavation in soil using hydraulic excavator C.K. 90 and tipper with disposal upto 1000 m :- Excavation for road work in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading tipper triming bottom and side slope in accordance with requirement of line, grade and cross section and transporting of the embankment location within all lift and lead. as per MoRTH specification No. 301 (Including all taxes but excluding GST)

Construction of Embankment with Material deposited from Roadway Cutting:- Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 (Including all taxes but excluding GST)

Construction of Embankment with Material obtained from road side without lead) :-Construction of embankment with approved materials obtained from borrowpits with all lifts and leads, transporting to site , spreading grading to required slope and compacting to meet requirement of table 300-2 (without lead) material obtained from right way. (Including all taxes but excluding GST)

Construction of Embankment with Material obtained from Borrowpits :- Construction of embankment with approved materials obtained from borrowpits with all lifts and leads, transporting to site, spreading grading to required slope and compacting to meet requirement of table 300-2 from 3.00 Km. distance (Including all taxes but excluding GST)

Construction of Granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401(B). (Including all taxes but excluding GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with static roller 8-10 tonne to achieve the desired density as per MORTH specification NO.-406 (Including all taxes but excluding GST)

WMM+1% OPC Cement+3.5% Emulsion Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% OPC cement and 3.50% emulsion in uniform single layer on sub base/subgrade and compacting with the road roller to achieve the desired density. (Including all taxes but excluding GST)

Providing and applying tack coat-I with bitumen VG-10 using bitumen pressure distributer at the rate of 0.35kg per sqm area on the prepared bituminous/granular surface cleaned with mechanical broom complete as per clause 503 of MORTH specification. (Including all taxes but excluding GST)

Dense Graded Bituminous Macadam. Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. (Including all taxes but excluding GST)

Providing and applying tack coat-II Over DBM with bitumen VG-10 using bitumen pressure distributer at the rate of 0.30kg per sqm area on the prepared bituminous/granular surface cleaned with mechanical broom complete as per clause 503 of MORTH specification. (Including all taxes but excluding GST)

Providing and laying bituminous concrete with 100-120 TPH Batch Type HMP producing an average out put 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. (Including all taxes but excluding GST)

Construction of subgrade and earthen shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement to Table 300-2 (without lead). (Including all taxes but excluding GST)

Providing & fixing of Km. stone & Hectometer stone etc. complete as per drawing (Including all taxes but excluding GST)

Construction of U-Drain. (450x600mm.) in Abadi Portion. Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (Including all taxes but excluding GST)

PCC Grade M-10 (1:3:6) Plain cement concrete 1:3:6 cement, coarse sand & 40 mm nominal size stone ballast in foundation including cost of material, all labour T&P etc. required for proper completion of the work. (In U-Drain) (Including all taxes but excluding GST)

RCC Grade M20 Providing and laying M-20 Grade reinforced cement concrete in bottom and walls of U-Drain complete as per drawing and technical sprecifications. (Including all taxes but excluding GST)

HYSD Bar Supplying, fitting and placing HYSD bar reinforecement in Bottom and walls of U-Drain complete as per drawing and technical specifications. (Including all taxes but excluding GST)

Construction of NP-3 Hume Pipe Culvert. Earth work in excavation of foundation of structures as per drawing and technical specification and backfilling with approved material. (Including all taxes but excluding GST)

P.C.C. 1:3:6 in foundation Plain cement concrete 1:3:6 cement, coarse sand & 40 mm nominal size stone ballast in foundation including cost of material, all labours T&P etc. required for proper completion of the work. (In Hume Pipe Culvert) (Including all taxes but excluding GST)

Brick work in 1:3 Cement Mortar with coarse sand including supply of all material all labour T&P etc. required for proper completion of the work (In Hume Pipe Culvert) (Including all taxes but excluding GST)

Struck pointing on brick works with cement mortar in 1:2 with consisting of one part cement & two parts of fine sand of 1.25 F.M. including supply of all materials, labour & T & P etc required for proper completion of the work. (In Hume Pipe Culvert) (Including all taxes but excluding GST)

Providing and laying of R.C.C. Hume pipe NP-3 600 mm dia. (Including all taxes but excluding GST)

Providing and laying of R.C.C. Hume pipe NP-3 900 mm dia. (Including all taxes but excluding GST)

Repair/Widening of R.C.C. Culverts: Dismantling brick work in lime or cement mortar and including stacking of materials as directed by E/I. within a distance of 60 mtr. Sch. PWD No.-692 (Including all taxes but excluding GST)

Dismantling reinforcement cement concrete or reinforcement brick work including stacking of Dismantled materials as directed by E/I. within a distance of 60 mtr. Sch. PWD No.-694 (In R.C.C.Culvert) (Including all taxes but excluding GST)

Earth work in excavation in foundation of structures as per drawing and technical specification including setting out construction of shoring and bracing of sides and bottom, back filling the excavated earth to the extent required utilising the remaining earth locally for culvert work. as per SI No.-251 (Including all taxes but excluding GST)

Providing and Laying Cement Concrete 1:3:6 cement, Coarse sand and 40 mm gauge approved stone ballast including cost of material all labour T&P etc. required for proper completion of work. (In R.C.C.Culvert) (Including all taxes but excluding GST)

Brick work in 1:3 Cement Mortar with coarse sand including supply of all material all labour T&P etc. required for proper completion of the work (In R.C.C.Culvert) (Including all taxes but excluding GST)

Struck pointing on brick works with cement mortar in 1:2 with consisting of one part cement & two parts of fine sand of 1.25 F.M. including supply of all materials, labour & T & P etc required for proper completion of the work. (In R.C.C.Culvert) (Including all taxes but excluding GST)

RCC Grade M-25 Providing and laying M-25 Grade reinforced cement concrete in Bed Block, Slab and wearing Coat complete as per drawing and technical sprecifications. (In R.C.C.Culvert) (Including all taxes but excluding GST)

HYSD Steel Supplying, fitting and placing HYSD bar reinforcement in Bed Block, Slab and wearing Coat complete as per drawing and technical specifications. (In R.C.C.Culvert) (Including all taxes but excluding GST)

Filter Media Providing and laying of filter material behind abutment with granular materials/ stone crushed aggregates satisfying the requirements laid down as per MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications. (In R.C.C.Culvert) (Including all taxes but excluding GST)

Supply of plywood 12 mm. thick century or equivalent for mid expantion joint as per direction of E/I. as per SOR Chapter- No.-1/14.1 (In R.C.C.Culvert) (Including all taxes but excluding GST)

Weep Holes Providing weep holes in brick masonry in abutment, wing wall/ return wall with 100mm dia PVC pipe extended through the full width of structure with slope of 1V:20H Complete as per drawing and technical specifications No. 2706 & 2200 (In R.C.C.Culvert) (Including all taxes but excluding GST)

Sand Filling behind the wing Walls complete including cost of sand from approved quarry, all labour, T&P etc required for proper completion of the work as per Drawing and Technical Specifications (In R.C.C.Culvert) (Including all taxes but excluding GST)

ROAD SAFETY PROVISIONS: RUMBLE STRIP Provision of coarse textured rumble strips made of premix or any equivalant of 200-300 mm. vide and of 20-30 mm. height placed at 1.00 meter center to center at approved locations to control speed and marked with white strips of road marking paint. (Including bitumen and all taxes but excluding cost of GST) as per direction of Engineer-In-Charge.

Zebra Crossing : Providing and laying of thermoplastic marking 2.5mm thick as per approved layout and design including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm exclusive of surface applied glass beads as per MoRTH specification No. 803 The finished surface to be level, uniform and free from streack and holes. (Including all taxes but excluding GST)

Caution Board. Providing and fixing of retro-reflectorised cautionary sign board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 1200 mm. equilaterial triangle vide clause-801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 x75 x 6 mm( 3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST) (Board Size-1200 mm. triangle)

Repeated Bars : Providing & Laying of thermoplastic marking of 300 mm. vide and 15 mm. height, at 1000 mm. (one set is of 6 strips) 15 mm. height is achived through six applicationas of thermoplastic applied at an interval not less than 1 hour after the provision layer got solidified including reflectionsing glass beads @ 250gms per sqm area, thickness of 15.00mm exclusive of suraface applied glass beads as per IRC:35-2015 the finished surface to be level, uniform and free from streak and holes. (Including all taxes but excluding GST)

TRAFFIC SIGNS - RUMBLE STRIP BOARD Providing and fixing of retro-reflectorised Rumble Strip Sign Board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 1200 mm. equilaterial triangle vide clause-801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 x75 x 6 mm( 3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST)

TRAFFIC SIGNS - SINGLE CHEVRON (NORMAL) Providing and fixing of retro-reflectorised Single Chevron Sign Board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 750 x 900 mm. rectangular vide clause-801.3, fixed over aluminium sheeting, 1.5 mm thick, back supported frame 25x25x3 mm. angle on a mild steel angle iron post 75 x75 x 6 mm( 3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST)

TRAFFIC SIGNS - HAZARD MARKER (LEFT/RIGHT) Providing and fixing of retro-reflectorised Hazard Marker sign board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 30cm.x90cm. rectangular clause 801.3, fixed over aluminium sheeting, 1.5 mm thick, back supported frame 25x25x3 mm. angle on a mild steel pipe of 80 mm. dia. having 1.6 mm. thickness (3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 30x30x45 cm., 45 cm below ground level (Painted with 3 coats of red lead paint) as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST)

TRAFFIC SIGNS - STATE HIGHWAY ROUTE SIGN BOARD Providing and fixing of retro-reflectorised State Highway Route Sign Board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 45cm.x60cm. rectangular clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 x75 x 6 mm( 3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST)

TRAFFIC SIGNS - MAXIMUM SPEED LIMIT Providing and fixing of retro-reflectorised Maximum Speed Limit Sign Board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 90 cm. circular clause 801.3, fixed over aluminium sheeting, 1.5 mm thick, back supported frame 25x25x3 mm. angle on a mild steel angle iron post 75 x75 x 6 mm( 3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST) (Board Size 900 mm. Circular)

TRAFFIC SIGNS - STOP Providing and fixing of retro-reflectorised Stop Sign Board as per IRC:67 made of prismatic grade Sheeting (Type-XI) 1200 mm. octagonal clause 801.3, fixed over aluminium sheeting, 1.5 mm thick back supported frame 25x25x3 mm. angle on a mild steel angle iron post 75 x75 x 6 mm( 3.50mtr) firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per MoRTH Specification and approved drawing. (Including all taxes but excluding GST)

Road marking with Hot Applied Thermo Plastic Compound-Providing and laying of hot applied thermoplastic compound 2.5mm thick as per approved layout and design including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm exclusive of surface applied glass beads as per MoRTH specification No. 803 The finished surface to be level, uniform and free from streack and holes rates to be inclusive of all labour and T&P etc complete required for proper completion of the work as per direction of E/I. (Including all taxes but excluding GST)

Minor Bridge (Well Foundation Type) 4.00x12.00 Mtr. Span Providing and Constructing Temporary Island 8 m diameter for Construction of Well Foundation for 4 m dia. Well. (Including all taxes but excluding GST)

Providing and Laying Cutting Edge of Mild Steel for Well Foundation complete as per Drawing and Technical Specification. (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-30 Grade Reinforced Cement Concrete, in Well Curb in Well Foundation complete as per Drawing and Technical Specification. (1200, 1500 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-25 Grade Reinforced Cement Concrete, in Well steining in Well Foundation complete as per Drawing and Technical Specification. (1200, 1500 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-25 Grade Reinforced Cement Concrete, in Bottom plugging in Well Foundation complete as per Drawing and Technical Specification. (1200, 1500 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-25 Grade Reinforced Cement Concrete, in Intermediate plugging in Well Foundation complete as per Drawing and Technical Specification. (1200, 1500 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-30 Grade Reinforced Cement Concrete, in Well Cap in Well Foundation complete as per Drawing and Technical Specification. (1200, 1500 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Sinking of 4 m external diameter well through sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. MoRTH Specification-1200 (In Minor Bridge) (Including all taxes but excluding GST) 0-3.00m

Same as Item No.-54 but depth of sinking as 3m-10.00m (Including all taxes but excluding GST)

Same as Item No.-54 but depth of sinking as 10m-11.00m (Including all taxes but excluding GST)

Same as Item No.-54 but depth of sinking as 11m-12.00m (Including all taxes but excluding GST)

Providing and laying M-30 Grade reinforced cement concrete in sub-structure complete as per drawing and technical specifications (1500, 1700 & 1200 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-35 Grade reinforced cement concrete in deck slab complete as per drawing and technical specifications (1500, 1600 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-25 Grade reinforced cement concrete in Road Kerb complete as per drawing and technical specifications (1500, 1600 & 1700 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying M-30 Grade reinforced cement concrete in Wearing coat complete as per drawing and technical specifications (2702 of MoRTH Specification) (In Minor Bridge) (Including all taxes but excluding GST)

Supplying fitting and placing in position of strip seal type of expansion joint as per drawing & technical specification and clause 2607 of MoRTH Specification. (In Minor Bridge) (Including all taxes but excluding GST)

Drainage Spouts 1.00 M. length (Size 100 mm. dia GI Pipe with 10 mm. dia GI Bolt & GI MS Clamp) complete as per drawing and Technical specification clause 1209 of MORD Specification. (In Minor Bridge) (Including all taxes but excluding GST)

Supply fitting and placing in position of neoprene pad bearing. (In Minor Bridge) (Including all taxes but excluding GST)

Supplying, Fitting and Placing of un-coated HYSD bar Reinforcement in Foundation/Sub structure/Super structure complete as per Drawing and Technical Specifications. Clauses 1600 of MoRTH Specification. (In Minor Bridge) (Including all taxes but excluding GST)

Providing, fitting and placing mild steel Railing complete as per drawing and Technical Specification Clause 2703.2 & 1900 (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying reinforced cement concrete in Approach Slab including reinforcement & formwork as per drawing and technical sprecifications Clause 1500,1600,1700 & 2704 of MoRTH. (In Minor Bridge) (Including all taxes but excluding GST)

Sand Filling in Wells complete including cost of sand from approved quarry, all labour, T&P etc required for proper completion of the work as per Drawing and Technical Specifications. (In Minor Bridge) (Including all taxes but excluding GST)

P.C.C. 1:3:6 in Approach Slab Base Plain cement concrete 1:3:6 cement, coarse sand & 40 mm nominal size stone ballast including cost of material, all labour T&P etc. required for proper completion of the work. (In Minor Bridge) (Including all taxes but excluding GST)

Protection Work of Minor Bridge. For Boulder Pitching Excavation in foundation in ordinorary soil (loam clay or sand) including lift upto 1.50m. and lead upto 30m. including filling watering and ramming excavated earth in to the trenches and removal and disposal of surplus earth as directed by the E/I up to a distance of 30 meters from the foundation trenches as per SI No.251 (In Minor Bridge) (Including all taxes but excluding GST)

For Boulder Pitching Providing and laying Filter material underneath pitching in slopes complete as per drawing and technical specification. (In Minor Bridge) (Including all taxes but excluding GST)

Providing and laying Boulder Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of Toe of embankment complete as per drawing and technical specification. (In Minor Bridge) (Including all taxes but excluding GST)

Construction of K.C. Drain as per drawing and specification (In Minor Bridge Approach) Earth work in excavation in foundation of structures as per drawing and technical specification & back filling the excavated earth to the extent required utilising the remaining earth as per SI No.-251 (Including all taxes but excluding GST)

Providing and Laying Cement Concrete 1:3:6 cement, Coarse sand and 40 mm gauge approved stone ballast including cost of material all labour T&P etc. required for proper completion of work. (Including all taxes but excluding GST)

Providing and Laying Cement Concrete 1:2:4 cement, Coarse sand and 20 mm gauge dalla grit including cost of material all labour T&P etc. required for proper completion of work. (Including all taxes but excluding GST)

Brick work in 1:3 Cement Mortar with coarse sand including supply of all material all labour T&P etc. required for proper completion of the work (Including all taxes but excluding GST)

Struck pointing on brick works with cement mortar in 1:2 with consisting of one part cement & two parts of fine sand 1.25 FM including supply of all materials, labour & T & P etc required for proper completion of the work. (Including all taxes but excluding GST)

Construction of Chute Drain (Size-50x35Cm.) as per drawing and specification (In Minor Bridge Approach Slope) Earth work in excavation in foundation structures as per drawing and technical specification & back filling the excavated earth to the extent required utilising the remaining earth as per SI No.-251 (Including all taxes but excluding GST)

Providing and Laying Cement Concrete 1:3:6 cement, Coarse sand and 40 mm gauge approved stone ballast including cost of material all labour T&P etc. required for proper completion of work. (Including all taxes but excluding GST)

Providing and Laying Cement Concrete 1:2:4 cement, Coarse sand and 20 mm gauge dalla grit including cost of material all labour T&P etc. required for proper completion of work. (Including all taxes but excluding GST)

Brick work in 1:3 Cement Mortar with coarse sand including supply of all material all labour T&P etc. required for proper completion of the work. (Including all taxes but excluding GST)

12 mm. thick Plaster with cement mortar in proportion of 1:3 with consisting of one part cement & three parts of approved coarse sand including supply of all materials, labour & T & P etc required for proper completion of the work. (Including all taxes but excluding GST)

M/S M V D INFRA DEVELOPERS PRIVATE LIMITED

C S Infraconstruction Limited

RCC Developers ltd.