Repair to Leakage, seepage, Joinery, flooring, ceiling, sanitary fittings, plastering, Painting, roof sheeting etc and internal Electrification of KLP and Anarwala Area under AGE BR-I of GE Dehradun.

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

M&L brick work with sub class 'B' bricks, old size straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified

M&L brick work with sub class 'B' bricks old sixe straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L Walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 except stones complete. all as specified and directed.(stone shall be reused obtained from demolation).

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed..

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair without using extra cement complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair without using extra cement Complete all as specified and directed.

M & L 10 mm thick rendering on celing surface in cement mortar 1:3 , surface finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for preparation of wall surfaces and applying exterior grade acrylic water proof wall care putty 1 mm thick to make the surface smooth complete all as specified and directed.

M&L for preparation of wall and applying interior grade wall care putty 1 mm thick to make the surface smooth as specified and directed .

M&L preparation of old decorated surfaces of wall etc and applying one coat of oil bound distemper in any tint complete all as specified and directed .

M&L complete removal of existing treatment for wallsetc and applying two coats oil bound distemper over a coat of primer any tint complete all as specified and directed .

M&L complete removal of existing treatment for walls etc and applying two coats of cement base paint over a coat of primer complete all as specified and directed .

M&L for one coat of cement base paint on already prepared/putty surfaces of walls complete all as specified and directed .

M & L preparing, of old decorated surfaces of wall, pillasters, cornices, AC sheet etc. by washing, rubbing down & scrapping with steel wire brass, emrypaper, steel plate etc and applying one coat of cement base paint complete all as specified and directed.

M & L preparation of old decorated surfaces for walls etc and applying one coat of white wash complete all as specified and directed .

M & L preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coat of exterior emulsion paint (APEX ULTIMA) over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified

M&L for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 25 here in above but as in skirting etc over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified

M & L 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary form work complete all as specified

M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified

M&L in repair 18 to 20 mm thick machine cut polished granite 1st quality any colour stone slab over kitchen platform, steps, jambs, pillars, window cill and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed.

M&L grinding and polishing to edges and rounding of granite kota or marble slab with smooth finishing complete all as specified and as directed

M&L in repair mirror finish machine cut kota stone slab 15-18 mm thick flooring in step, floor etc over and including 15mm CM 1:6 screed bed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing, rounding of edges & polishing complete all as specified

M&L in repair mirror finish machine cut Kota stone slab 15-18 mm thick, as on vertical surfaces such as riser of steps, skirting, dado etc. over & including 10mm thick rendering (bedding layer) in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding of edges and polishing complete all as specified.

Taking down and re-fixing the existing shutter of any description in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all specified and directed.

Taking down and re-fixing the existing shutter of any description in same opening after & including necessary easing/repair etc.n exc. 1 Sqm complete all as specified

Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified

Taking down shutter exc. 1 Sqm but n. exc. 2 Sqm each and removing from site complete all as specified

Taking down chowkhats or frames with shutters of any description n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frames with shutters of any description exc. 1.5 Sqm but not exceeding 4 Sqm each without taking off shutters from frame complete all as specified and directed.

S & F 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed.

S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: filling in frame with cement concrete1:2:4 type B0 using 12.5 mm stone aggregate shall be included in quoted rate.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding confirming Fe-290 , gde E-165 complete all as specified

S&F mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified

S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified

S&F in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

S&F in repairs factory made 100 % PVC flush type shutter of 18mm thickness one side prelaminate as in Cupboard shutters, partition, kitchen CB, etc consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.

S&F in repairs factory made 100 % PVC flush type shutter/ board of 15 mm thickness both side plain as in Cupboard partition, shelves, sides, etc consisting of panel of PVC thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 15mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F stainless steel barrel tower bolts 150 mm long one piece gde-304 and fixed complete all as specified

S & F stainless steel barrel tower bolts 200 mm long one piece gde-304 and fixed complete all as specified

S & F stainless steel butt hinges, medium weight 75 mm long one piece gde-304 and fixed with screws/welded to frame ,complete all as specified

S & F stainless steel butt hinges, medium weight 100 mm long one piece gde-304 and fixed with screws/welded to frame ,complete all as specified and directed

S & F stainless steel handles 150 mm long one piece gde-304 and fixed with screws/welded to frame ,complete all as specified and directed

S & F stainless steel handles 125 mm long one piece gde-304 and fixed with screws/welded to frame ,complete all as specified and directed

S&F Hasp and staple 75mm safety type, stainless steel gde-304 with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S & F 300 mm long stainless steel sliding door bolt gde-304 (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed.

M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

S & F 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

M & L applying two coats of Synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S&F MS work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed..

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girthincluding preparation of steel surfaces complete all as specified and directed..

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends complete all as specified and directed..

Taking up or down steel / PPR water tubing and connection incl removal from site of 15 mm bore of pipe complete all as specified all as specified and directed.

Taking up or down steel / PPR water tubing and connection incl removal from site of 20mm bore of pipe complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling, for 15mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling for 20mm bore GI tubing complete all as specified and directed..

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed .

S&F 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed .

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n exceeding 20cm girth complete all as specified and directed..

Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white seat cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe including making good to floor complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified

S & F in repair 90 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified

S & F 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

S & F 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

S&F in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified and directed .

S & F in repair vitreous china wash hand basin white, oval type counter top of size 550 mm x 400 mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed.

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed.

S&F in repair pillar taps, swan neck, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower with connecting legs &flanges complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S&F in repair Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified.

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed . Make : Jaquar Cat No.ALE-ESS-585/Parryware Cat No. T9941A1 or equivalent in CERA.

Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S&F in repair looking mirror mounted on decorative type PVC frame of size 450 mm x 600 mm x 5.5 mm thick fixed to wooden plug with CP brackets screw fixed, complete all as specified .

S&F in repair 32 mm Waste fittings/coupling, brass, chromium plated for sinks, wash hand basins, etc. with long screwed shanks and fly-nuts complete all as specified

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed.

S&F in repair Urinal Flat Back of size 360 x 330 x 740 mm with chromium plated bottle trap fixed to wall complete all as specified and directed.

M&L cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner completed all as specified and directed.

M&L cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner completed all as specified and directed.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, completed all as specified and directed.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

S&F in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed.

M & L in repair 75 mm PVC floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed..

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed..

S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

Supply and fix in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

M&L for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83 x 44.45 x 2.00 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc including dismantling of exixting structure complete all as specified and directed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F in repair Brass Mortice lock, four levers vertical type, size 100 mm size complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base etc finished even and fair without using extra cement, complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for cleaning of existing seawage pipe line 100mm /150mm/200mm internal dia at any depth including manholes by removing the manhole cover of any type/size and cleaning by means of hydraulic jet pressure machine/ manually (as directed by Engr-in-charge) as required at site from manhole and well flushing with water after cleaning including getting out sludge and disposal out of defence land , refixing the manhole in original complete all as specified and directed

M&L cleaning the blockage of bathroom/ kitchen by cleaning the nahani traps/ gully traps of all the mud /sludge and getting out, washin thoroughly grating of trap,CI waste pipes by opening the clearing eyes and deposting the sludge in a pit of suitable size at a distance not exceeding 50 meters form the gully trap and covering the same with the soil obtained from excavation of pit including all excavatons and earthwork complete all as specified and directed .

M&L cleaning of blockage of WC indian or European type by removing of all the mud/sludge and getting out depositing the sludge in a pit of suitable size at a distance n exc 50 mtr from the WC excavations and earth work complete all as specified and directed.

Cleaning of manholes any depth any size taking out accumulated, soil, sludge any material incl both ends and removal out of defence lands and refixing manhole cover complete all as specified and directed .

Sucking out sewage water through sewage tanker (5000 ltr capacity) from the man hole/septic tank/ soakage well in different location and disposing off out of MD land as directed. Notes. For cleaning of sewage system:- (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work. (d) The work in foul conditions such as cleaning of soakwell, septic tanks, manholes etc shall be carried out with mechanical means where work with mechanical means is not practicable and work shall be executed manually with the permission of Engr-in-Charge.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and directed .

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed .

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.

S&F, laying, jointing and testing salt glazed stone ware drain pipe 150 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 complete all as specified.

M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any posotion not otherwise provided for complete all as specified and directed.

Supply & fix 1 mm dia wire mesh fabric (Cicken wire mesh) as in walls, roofs, etc for bounding of cracks in plaster etc complete all as specified and directed.

M & L in repair 18-20 mm thick medium density fibre board, exterior grade, fixed to timber/ MS framework with screws in any position, complete all as specified and directed.

Suppy only Ball Bearing No 6201-6204 as reqd suitable for ceiling fan of sweep 1200/1400 complete all as specified & directed , Make SKF/NBC/TATA

Suppy only Down Rod with connecting accessories suitable for ceiling fan of sweep 1200/1400 lengh 75 cm complete all as specified nd directed

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using suitable size GI pipe as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as directed.

Supply only sleeves of supper quality for fans winding repair of different size as reqd all as specified and directed.

Supply only split pin of reqd size for ceiling fans fixing all as specified and directed.

Supply only heavy duty rubber insulator for 1200/1400 mm sweep for hanging ceiling fan.complete all as specified and directed

Supply only capacitor 2.5 to 3.15 MFD as per existing capacity of 240 volts AC complete all as specified and directed.Make EPCOS/Havells/L&T

Supply only heating element any type as per site requirement of capacity 2 KW (Traingular/cup/box type as reqd) ISI Marked complete all as specified and directed.. Make-Newton/Theta/Dashmesh.

Supply only thermostat for geyser as per site requirement temp setting on 60 degree Centigrade ISI Marked complete all as specified and directed. Make : Newton/Theta/Bajaj

Supply only LED indication lamp Green/Red as reqd suaitable for Water Storage Geyser complete all as specified & directed.

Supply only fusable plug made out of brass and lead as per existing make and size complete all as directed.

Supply only flange assembly (Siphon) for 50 ltrs capacity of geyser and any type of hole (6 no) with safety valves as per existing make & size as per requirement complete all as specified & directed

Supply only PVC flexible connection Nylon braided with suitable threaded check nut & washer complete suitable for hot & cold water 15mm dia along with threaded brass nuts & washers 45 cm long complete all as specified & directed. Make : Prayag/Crompton/Havells

Supply only switch piano flush, button type 5 Amp SP PentaPC/Gold series complete all as specified .

Supply only switch piano flush, button type 5 Amp ,two way PentaPC/Gold series complete all as specified and directed.

Supply only switch piano flush button type 15 Amps SP PentaPC/Gold series complete all as specified .

Supply only socket outlet multipurpose 5 Pin 5 Amp PentaPC/Gold series complete all as specified & directed .

Supply only socket outlet two in one 5 pin 5 Amp and 15 Amp PentaPC/Gold series flush type complete all as specified & directed.

Supply only bell push piano flush, button type 5 Amp SP PentaPC/Gold series complete all as specified & directed .

Supply only bell push ,Surface series, 6Amp, SP,240V,50 Hz complete all as specified & directed .

Supply only Calling bell, Ding dong type 230V AC ,SP complete all as specifien & directed.

Supply only ceiling rose surface bakelite 3 terminals of size 65x25 mm. complete all as specified & directed.

Supply only 5 Step socket flush type type, electronic fan regulator 120 Watt,6 Amp ,240V complete all as specified & directed .

Supply only, flush swith type , electronic fan regulator 100 Watt,6 Amp,240V complete all as specified & directed.

Supply only MCCB 415 Volt, 15 KA, 4 pole 63 Amp, thermal magnetic type,1CS=100% ICS complete all as specified and directed..

Supply only MCCB 415 Volt, 15 KA, 4 pole 100 Amp thermal magnetic type 1CS=100% ICS complete all as specified and directed. .

Supply only MCB ,single pole 240 Volt, C curve 10 KA ISI Marked 5 to 32 Amps complete all as specified and directed..

Supply only MCB, SPN, 240 Volt, C curve 10 KA ISI Marked , 32 Amps in existing DBs complete all as specified and directed..

Supply only MCB ,SP,240 Volt, C curve 10 KA ISI Marked ,40 Amps complete all as specified and directed..

Supply only MCB ,DP, 240 Volt, C curve 10 KA ISI Marked , 32 Amps complete all as specified and directed.

Supply only MCB ,DP, 240 Volt, C curve 10 KA ISI Marked , 40Amps complete all as specified and directed..

Supply only MCB ,TPN,415 Volt, C curve 10 KA ISI Marked ,63Amps complete all as specified and directed..

Supply only 5 -in-1, 6 Amp,240V, SS Combined unit with box (surface type) with two fixing holes incl fixing rawal plug & screws complete all as specified and directed Make : Anchor/Havells/Legrand

Supply only 5 -in-1, 6/16 Amp,240V, SS Combined unit with box (surface type) with four fixing holes incl fixing rawal plug & screws complete all as specified and directed Make : Anchor/Havells/Legrand

Supply only POWER UNIT (Strip) 8 Module , 6amp (2 no) +16 Amp socket (1 no)+ 16 Amp switch with Indicator complete all as specified and directed Make : Legrand/Anchor/HPL

Supply only surface mouting gang box for one switches with two /four holes incl fixing rawal plug & screws complete all as specified and directed Make : Anchor/Havells/Legrandwith 2/4 fixing holes

Supply only surface mouting gang box for three switches with two /four holes incl fixing rawal plug & screws complete all as specified and directed Make : Anchor/Havells/Legrandwith 2/4 fixing holes

Supply only surface mouting gang box for five switches with two /four holes incl fixing rawal plug & screws complete all as specified and directed Make : Anchor/Havells/Legrandwith 2/4 fixing holes

Supply only Distribution box MCB Protected socket with Plastic enclosure (Surface mounting) 20 Amp MCB DBOXX Combo DP including Plug top complete all as specified and directed.Make-Havells/Legrand/L&T

Supply only Plug Top , 3Pin ,5A with indicator ISI Marked complete all as specified and directed.

Supply only Plug Top , 3Pin ,15 A with indicator, ISI Marked complete all as specified and directed .

Supply only Metal Plug , 240V,20 A,2P+E suitable for Geyser's DB Enclosure all as specified and directed.

Supply only Metal Socket , 240V,20 A,2P+E with blue cap suitable for Geyser's DB Enclosure all as specified and directed.

Supply only PVC conduit medium grade 20 MM dia complete all as specified and directed .

Supply only PVC conduit medium grade 25 MM dia complete all as specified and directed .

Supply only saddle PVC nail type for fixing of PVC batton complete all as specified and directed

Supply only saddle PVC nail type for fixing of PVC Conduit 20 mm dia complete all as specified and directed

Supply only saddle PVC nail type for fixing of PVC Conduit 25 mm dia complete all as specified and directed

Supply only FASTNER with complete set with nuts & washers suitable for 25 ltr cap Recold geyser complete all as specified and directed

Supply only FASTNER , 100 mm long,dia complete set with nuts & washers complete all as specified & directed

Supply only PLASTIC RAWAL PLUG, SIZE 50MM complete all as specified and directed

Supply only Matal Wood Screw , size 50mm complete all as specified and directed

Supply only single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 4 sqmm complete all as specified and directed .

Supply only single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 2.5 sqmm complete all as specified and directed .

Supply only single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 1.5 sqmm complete all as specified and directed .

Supply only twin core 6 Sqmm alluminium conductor PVC cable complete all as specified and directed .

Supply only twin core 10 Sqmm alluminium conductor PVC cable complete all as specified and directed .

Supply only twin core 16 Sqmm alluminium conductor PVC cable complete all as specified and directed Make Havells/L&T/KEI

Supply only PVC flexible wire two core twin twisted of size 23/0.0076 copper conductor complete all as specified and directed.

Supply only flexible copper cable , three core of size 40/0.0060 with copper multistranded conductor PVC insulated complete all as specified and directed.

S&F in repair wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No BN 021 C LED 20 S PSU CW GR S2 /Havells ENDURALINEARNEOBS20W LED840SPCWH / Wipro LL20-281-XXX-65AL1

Supply only Integral flood light light LED type 80 watt of die -cast IP 66 aluminium housing , LED 6000 K lense type and toughened glass having separate surge protector 10KV, efficiency of minimum 100 lumens/watt complete all as specified and directed, Make : Cromton Cat no LFL-80-CDL/60 OR Equivalent in Philips/Havalls

Supply only Decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, suitable for 15 Watts LED Lamp incl one LED New Odore 10W E27 WW Ball Lamp Lumen output 835 (lm) 3000K complete all as specified and directed Make : Havells (City-1) cat part No LHDL02160099 (Fitting) LHLDERHEMD8X010(Lamp) /Mepro cat no AL-170 or eqvt in Philips/CG.

S&F in replacement of LED tube rod 18/20 Watts single or double sided connections complete incl making connection alteration in existing tube light fitting complete all as specified and directed Make Havells LHLDEFXD5L8R020 or eqvt in Philips/CG.

Supply only fully diffused recessed mounted 2'x2' LED luminaire with UGR<19, for Full Glow Office Complaint indoor spaces, LED 36 Watt ,6500K in White & gray housing with profiled & flat diffuser all as specified and directed .Make : Philips cat no RC 380B LED36S-6500G4L60W60PSUODOC OR Equivalent in wipro/Havells

Notes :- (i) Materials taken as “Supply only” (E/M portion) in the BOQ shall be supplied and deposited to MES Store of Engr-in-Charge as and when demanded by Engr-in-Charge. The items received will be taken on ledger charge. The items shall be issued by the Engr -in-Charge on proper “Issue voucher” and gate pass solely for the purpose of repair/ maintenance under this contract only. Proper records of issue and consumption of items shall be maintained by the Engr-in-Charge and the contractor. (ii) The items dismantled from the site by the electricians deployed for attending complaints shall be deposited in the store yard of AGE EM and same shall be taken on charge by the concerned AGE/JE.

ANANYA CONSTRUCTION CO.

M/S C S AITHANI