PROVN OF ROAD FROM SMB-I TO ILM TRG AREA OF 5/1 GR UNDER GE DEHRADUN

Amount

Surface excavation n exc 30 cm dep and averaging 15 cm deep and getting out hard/dense soil all as specified and directed

M&L for providing Soling (for sub base) 150 mm spread thickness with broken boulders quarried stone interstices filled surfaces formed and rolled and consolidated to required gradient and camber with 8 to 10 Ton power roller complete all as directed by Engr-in-Charge.

M&L for providing 150mm thick WBM in two layers each layers 75mm thick with coarse aggreagate granite trap or basalt of grading 2 spread rolled and consolidated to gradient and chamber with 8 to 10 Ton power rolled complete all as directed by Engr-in-Charge.

Preparing WBM/ black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.and applying evenly a priming/ tack coat with bituminous priming/ tack coat with bituminous primer (Paving bitumen VG-10) at 10Kg/10 Sqm complete all as specified.

M&Lfor Premix bituminous macadam (Paving bitumen any penetration) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) gradient to uniform smooth surfaces all as directed and specified.

M&L for Bituminous premix asphaltic semi-dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, paved bitumen by hot mix process and laid by mechanical paver,rolled with 8 to 10 tonne capacity power roller and compacted to required camber and gradient to uniform smooth surfaces (using paving bitumen VG-30) complete all as directed and specified.

Preparing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.and applying evenly a priming/ tack coat with bituminous primeriming/tack coat with bituminous primer (Paving bitumen VG-10) at 5Kg/10 Sqm complete all as specified.

M&L for Bituminous premix asphaltic semi-dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, paved bitumen by hot mix process and laid by mechanical paver,rolled with 8 to 10 tonne capacity power roller and compacted to required camber and gradient to uniform smooth surfaces (using paving bitumen VG-30) complete all as directed and specified.

Preaparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (Hot apllication) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification including spraying of glass beads etc all as per manufacture instructions and as directed by Engr-in-Charge.

Tridev Construction Company (BID ID -3067930)

M/S BRIJPAL SINGH MALIK (BID ID -3060446)

PAWAN KUMAR (BID ID -3056798)

doon infrastructure (BID ID -3060704)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3068358)