Interconnection of 33KV Main Bus Bars at 2 separate places by 3 No. 33KV 3x400 mm2 size XLPE Power Cables (including 1 No. spare cable) alongwith other associated Works at 132KV Substation Dohna under E.T.D.-II, Bareilly

Amount

Interconnection of 33KV Main Bus Bars at 2 separate places by 3 No. 33KV 3x400 mm2 size XLPE Power Cables (including 1 No. spare cable) alongwith other associated works at 132KV Sub Station Dohna, with all Cost of Men, Materials, Misc. Consumable, T&P etc. Required for Satisfactory Completion of the Work as per Technical Specifications and Direction of the Supervising Engineer as per Details below.

Fabrication of Support Structures with the help of Scrap M.S. Angles (to be Provided by the Department Free of Cost) for Vertical Support of 2 No. 33KV 3x400 mm2 XLPE Power Cables to be Connected with already Installed 33KV Bus Section Isolator at each ends of the 33KV Switchyard at 132KV Sub Station Dohna. (1 Job per Structure)

Grouting of above M.S. Support Structure with due Concreting etc. in front of above Bus Section Isolator at both end. (1 Job per Structure)

Painting of above Grouted M.S. Support Structures with 1 Coat of Red Oxide Primer & 2 Coats (The 2nd Coat of Paint shall be Applied at the Gap of 48 hrs. when 1st Coat of Paint is done & Checked by concerned S.D.O. / J.E.) of 1st Quality Synthetic Enamel Paint of Asian / Berger / Nerolac make in Smoke Grey Colour after due Rubbing with Sand Paper & Wire Brush. (1 Job per Structure)

Providing & Laying of 3 No. 33KV 3x400 mm2 size XLPE Power Cables (including 1 No. Spare Cable) under the Ground between 33KV Main Bus Section Isolator - I to 33KV Main Bus Section Isolator - II at 132KV Sub Station Dohna. The Work also includes Excavation of Trench, Laying the 1st Class Brick Lining & Filling of River Sand along and over the Cable, then Back Filling & Leveling the Trench after Laying of the Cables. (Approx. 100 Meter Length of each Cable)

Providing of Outdoor End Termination Jointing Kits and Making the End Termination Joints of the above Laid 3 No. 33KV 3x400 mm2 size XLPE Power Cables to Connect the Cables with 33KV Main Bus Section Isolator - I & II at each end of the 33KV Main Bus Bar.

Cutting, Straightening & Laying of 50x6mm size M.S. Flat to be Provided by the Department, 500 mm below the Ground for Earthing of the Support Structures to Connect the same with Main Earth Mat including Excavation of Trenches as Required and its Back Filling etc.

Painting of above 50 × 6 mm size M.S. Earthing Strips with 1 Coat of Red Oxide Primer & 2 Coats (The 2nd Coat of Paint shall be Applied at the Gap of 48 hrs. when 1st Coat of Paint is done & Checked by concerned S.D.O. / J.E.) of 1st Quality Synthetic Enamel Paint of Asian / Berger / Nerolac make in Bus Green Colour after due Rubbing with Sand Paper & Wire Brush, as per Dtails below :

EMC Associates

Hi-tech power transmission