Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2 L
Closing Date
23 Mar 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
ELECT G
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work for minimum eligibility criteria is as under: 1)Erection of LT or above voltage level distribution panels. 2)Erection and commissioning of LT or above voltage level line (Over head or underground). 3)Electrification/Rewiring service building, bungalow, and quarters. 4)Supply and erection of tower light. 5)Lighting of station/Administrative building/Circulating area.
3 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1. I/We have visited the works site and I/We am/are aware of the site conditions. 2. We have read the tender Notice[NIT] details, Tender document along with all the conditions attached/referred to, in this tender document, and agree to abide by the said conditions. 3. We are aware of the fact that the railway reserves the right to amend the scope and value of the contract and to reject[or accept] this offer without assigning any financial liability.
Balance/Pending Electrical works in CRP-BRKA, BES-BRKA & BRKA-MESRA section of Dhanbad Division
EL-49-OPEN-2025-26
EL-49-OPEN-2025-26
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹2 L
23 Mar 2026
25 Feb 2026
9 Mar 2026
51 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,00,01,180.09 | ||
| — | 150.00 | — | — | ||
| Wiring of sub-Main Line with FRLS copper wire single core size 6mm2 multistrand with earthing wire 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as required in PVC pipe/casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering or as per the requirement at site. (Wire Make-Havells, anchor, Finolex, Polycab , Mescab & KEI) | — | — | — | 9,109.5 | |
| — | 1130.00 | — | — | ||
| Wiring of Sub main concealed/surface(Normally concealed) in separate heavy gauge PVC conduit pipe 20mm size with single core PVC insulated multi strand copper conductor cable 2 nos of 4 sq.mm each for phase and neutral with earthing wire 1 No. 1.5 sq. mm. The colour coding of cable red for phase,black for neutral must be maintained . No other sub-main & point wiring will be drawn with this sub-main wiring in same PVC pipe. PVC pipe make - Polycab, Pressfit, Precision. Wire/cable make-Havells, Polycab, Finolex, Mescab. | — | — | — | 1,15,350.4 | |
| — | 100.00 | — | — | ||
| Wiring of Main Line with FRLS copper wire single core size 10 mm2 multistrand with earthing wire 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as required in PVC pipe/casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering or as per the requirement at site. (Wire Make-Havells,anchor, Finolex, Polycab, Mescab & KEI) | — | — | — | 7,911 | |
| — | 394.00 | — | — | ||
| Fixing, connection, testing & Supply of LED Batten, Box type luminaire, with CRCA body, Pre wired for LED tube with supply of Retrofit LED tubular lamp 1X20W,T-8, 4' long, complete with inbuilt LED driver, Make - Crompton,Havelles, Philips,Orient, Surya& Bajaj . (LED Luminarie of the makes as specified above should be as per RDSO's specification for Energy efficient LED based luminaire unit for indoor lighhts to be used in Indian Railway offices and buildings. (Fixing of fitting to be done with proper clamping arrangement as per the site requirement and connection to be done with1.5 sqmm single core copper conductor FRLS by tapping from sub main line including supply of ceiling rose and wires and PVC flexiable pipe)( The complete system of LED lights (including Driver etc) shall be guaranteed for satisfactorily performance and manufacturing defects for period of 60 months from the date of commissioning or 72 months from the date of suppply, whichever is earlier.(Reference: Railway Board's letter no.2006/Elect(G)/150/5 dated 27.03.15). | — | — | — | 3,93,475.98 | |
| — | 249.00 | — | — | ||
| Fixing, connection, testing, commissioning & Supply of Industrial luminare with polycarbonate housing pre-coated in white & pre-wired for LED tube IP65 protection similar to Crompton Cat. No. IPFC112LT8-16 , with supply of 2 nos LED tube 20W similar toCrompton CG Cat.Ref.LT8-20-865-2 Make- Crompton,Havelles, Philips,Orient, Surya& Bajaj.(Fixing of fitting to be done with proper clamping arrangement as per the site requirement and connection to be done with1.5 sqmm single core copper conductor FRLS by tapping from sub main line including supply of ceiling rose and wires and PVC flexiable pipe) ( The complete system of LED lights (including Driver etc) shall be guaranteed for satisfactorily performance and manufacturing defects for period of 60 months from the date of commissioning or 72 months from the date of suppply, whichever is earlier. (Reference: Railway Board's letter no.2006/Elect(G)/150/5 dated 27.03.15). | — | — | — | 7,49,280.84 | |
| — | 12.00 | — | — | ||
| Supply & fixing of Air circulators Wall fan 600mm sweep, single phase (Make - Havells,crompton,Bajaj) including supply fabrication of suitable clamping arrangement made of M.S Flat 40X5 mm size, with supply of suitable bolts, nuts and washers as per the site requirement and connection to be done with1.5 sqmm single core copper conductor by tapping from sub main line including supply of ceiling rose and wires and other accessories. | — | — | — | 1,01,212.8 | |
| — | 7.00 | — | — | ||
| Supply, erection, testing and commissioning of Distribution Board, Double Door, Powder coated with locking arrangement consisting 1No, 32A DP ELCB/RCCB as incoming and 6 Nos x 6A SP MCB and 2 Nos x 20A SP MCB as outgoing Complete. Make - L&T, Havells, Legrand ,C&S, BCH (Fixing of Distribution Board to be done with proper clamping arrangement as per the site requirement (normally concealed) and connection to be done with suitable conductor including supply of PVC flexiable pipe) | — | — | — | 35,730.38 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of LT Panel Outdoor type with closing double door powder coated consisting 125 A X 1 Nos for I/C and 3 x 63 A 4 Pole MCCB, 2 x 32 A 3 Pole MCB, 4X32 A DP MCB for O/G 3ph KWH meter and other accessories (Make- Havells, L&T, C&s, Legrand, BCH) | — | — | — | 1,01,319.04 | |
| — | 10210.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable as per Sr.DEE(G)/DHN's drg. No. EL/486-01 (cable will be supplied by the Railway) | — | — | — | 6,38,125 | |
| — | 11750.00 | — | — | ||
| Laying and fixing PVC/XLPE cables of different sizes ranging from 25 sq mm to 120 sq mm on surface of the wall (normally concealed)/steel structure as per the requirement of site with proper clamping arrangement as required at every 1/2 metre. (Cable will be supplied by Railway) | — | — | — | 5,83,622.5 | |
| — | 6470.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable on pucca/concrete road or concrete/tiled floor through making a trench of 6 inchs depth and 6 inches wide on the road / floor and refilling the trench with cement concrete (1:3:6) and finished to smooth surface in a manner as directed by Section Engineer in charge at site. (Cable will be supplied by Railway) | — | — | — | 7,46,443.9 | |
| — | 50.00 | — | — | ||
| Cable crossing across railway track/pucca road by boring hole at depth of not less than 01 mtr with supply and fixing of 100mm dia GI pipe(medium grade) including accessories.GI pipe with accessories will be supplied by the contractor. | — | — | — | 85,730 | |
| — | 4.00 | — | — | ||
| (a) Supply of 12.5 Mtrs. long High Mast Tower for 04 nos. LED floodlight fittings of 200W suitable for wind pressure upto 44m per sec, .with raising lowering system comprising head frame, luminaries ccarriage suitable to install 04 nos. luminaries in symmetrical arregment, doubledrum winch, 5mm diameter SS wire rope, trailling cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are of installation)-01 no (b) supply of foundation bolts manufactured from special steel along with nuts, washer, anchor plate and common template - 01 no. (c) supply of LED floodlight type BEBP 20FL 200W LED.-04 nos (d) Supply of LED type single dome aviation obstruction light.-01no (e) Supply of outdoor stand mounted fidder piller with 32A TPN MCB incomer, single dial time switch, 45A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and rais4e lower push button, incoming 35 nSq. mm and outgoing 16 & 2.5 sq. mm terminals(.Make-Bajaj, Surya, Orient, BPP)-01no | — | — | — | 10,75,822.96 | |
| — | 4.00 | — | — | ||
| (a) Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labours-01 no. (b) Erection of the highmast with the help of suitable tools and plants, wiring of luminairies with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour.-01 no (c) Provision of GI pipe earthing of highmast with 2.5 M long 40 mm dia GI pipe including connection to highmast earth terminal with 25*3 mm GI flats with all materials and labour. (2 nos per mast required)-.02no (d) Installation of the mast feeder pillar by grouting the stand in concrete.-01no | — | — | — | 3,92,919.36 | |
| — | 16.00 | — | — | ||
| Supply and fixing of 200 W LED flood light fitting, IP-66 with extruded aluminium housing. Fixing to be done as per the site requirement with supply of suitable clamping arrangement etc.Lumen efficacy - 120 Lumen per watt (min.), System Lumen >= 24000 Lumen.Make- Crompton, Havelles, Philips,Orient, Surya & Bajaj. | — | — | — | 1,27,505.6 | |
| — | 16.00 | — | — | ||
| Supply of octagonal pole (dip galvanised in single dip average 70 micron), 6m long, top dia 70mm, bottom dia 135mm sheet thickness 3mm in single section with base plate (220x220x12mm(LxBxT) with 700mm long double arm brcket and 4 nos.16mm dia x 600mm long (100mm thread projection) foundation bolts, complete with smart pack junction box with 6A MCB & stud terminals (for mounting inside base plate) and internal wiring for terminal to fitting with 2x2.5 sqmm cable of reputed make, Make-Bajaj, Bansal, Jindal, Transrail lighting LTD, Gammon Group, Utkarsh, Orient. | — | — | — | 2,53,978.72 | |
| — | 16.00 | — | — | ||
| Erection and casting of foundation for octagonal/tubular pole with earth excavation, with cement concrete (1:3:6) and muffing of base foundation, as per manufacturers drawing and dimension as required under the supervision of site incharge. | — | — | — | 40,321.12 | |
| — | 691.00 | — | — | ||
| Installation, connection, testing and Supply of LED Street Light Fitting 72W+/- 5% similar to Havells model OMNIPLUS, made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Light source - High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W. System Lumen Efficacy 110Lm/W, Electronic driver- Powered by integral, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage protection 10KV with SPD & other safety test as per IS 15885 Part-2/Sec 13. Warranty 5 years. (Make- Crompton, Havelles, Philips,Orient, Surya & Bajaj). Connection to be made with PVC insulated S/core stranded alum. FRLS Conductor 2.5mm2 with PG clamp of required size (including supply) | — | — | — | 36,84,253.07 | |
| — | 20.00 | — | — | ||
| Installation,fixing,testing,commissioning & Supply of LED floodlight of 160W +/- 10% similar to BAJAJ Make, Turbo LED floodlight series Luminare type BARFEG 160W LED ordering code 169642 with secondry optics made in pressure die cast housing and heat sink in aluminium extrusion with IP66 (Make-Crompton,Havelles, Philips,Orient, Surya& Bajaj) | — | — | — | 2,42,246.2 | |
| — | 610.00 | — | — | ||
| Supply and Erection of 100mm x65mm LT pin Insulator with GI Spindle and nuts etc. as required. | — | — | — | 63,061.8 | |
| — | 76.00 | — | — | ||
| Provision (Supply and erection) of Earthing station (RI-7021) as per Drg.No. ETI/ OHE/P/ 7020 or latest (The price shall cover supply and erection of an earth electrode (RI 7021) as per drawing no. ETI/OHE/P/7020. The price shall also cover the provision of a protective concrete Box with removable MS cover. The material should confirm to ACTM vol. II Part II Para 7.1.1 with figure A 3.01. The price shall cover the testing of earth value and painting the value on the earth pit. The earth electrode shall normally be of mild steel galvanized perforated pipe of not less than 44 mm nominal bore and about 3 meter length provided with a spike at one end and welded lug suitable for connecting directly Earth wire/MS flat of required size at other end. The connection of Earth wire/M S flats to each electrode shall be made through M S links by bolted joints, fasteners to be supplied by the contractor. The earth surrounding the electrode shall be chemically treated by alternate layers of fine charcoal and salt at least 150 mm all around. The item should be procured from approved supplier of CORE or RDSO, duly inspected by either RITES or Railway Representative deputed by Sr. Div. Elect.Engineer (G)/ Dhanbad.) | — | — | — | 2,32,639.8 | |
| — | 2990.00 | — | — | ||
| Providing and fixing 06 SWG / 5.0 MM dia GI wire on surface or in recess for loop earthing of street light poles, connection from earth pit to main junction board/panel, connecting different earth pits etc. Connection and Looping of earth wire to be done with suitable fasteners, nuts bolts and washer as required. | — | — | — | 20,870.2 | |
| — | 3.00 | — | — | ||
| Supply, Installation, connection, testing, commissioning of Cubical type, wall/mast mounted, dust and vermin proof, LT control switch board, confirming to IS:8623 (Latest version), suitable for operation on single phase, 2-wire, 415V, AC supply system, fabricated with 16 SWG, CRCA sheet, powder coated and complete with inter connections with copper conductor cable, copper busbars in bus chamber, clustered LED type indication lights, cable glands for incoming and outgoing, complete with TPN MCCB 63A, 35KA, fixed type (Ics=100% Icu)- 1 No.(Make -Indo asian, C&S, BCH, Havells, L&T ), copper bus bars 200A, as per the drawing(Make: Havells, Siemens, Standards, L&T). Mounting to be done on wall/mast as per the site requirement, with 50x50x6 mm MS Flat clamps, earth studs etc. under the supervision of site incharge. | — | — | — | 45,360 | |
| — | 2.00 | — | — | ||
| Installation, Connection, commissioning and Supply of Automatic supply changeover switch colour light signaling panels,63 Amps for 3 source single phase supply suitable for 10KVA AT as per RDSO specification No.-TI/SPC/PSI/CLS/0020 with A&C slip no:1 to 4 or latest. Signaling panel should be fixed on the wall / floor with proper grouting as per the site requirement including connection with crimping of cable ends as required under the supervision of site incharge. | — | — | — | 92,380 | |
| — | 4.00 | — | — | ||
| Supply of BEE 5 star rated bore well submersible pump-motor set of pump discharge capacity approx. 1.00 LPS (approx. 850 GPH) and discharge head 54 mtrs. (approx. 177feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other accessories such as suitable length 3 core flat copper conductor cable of size1.5 sq.mm,1100 Volt grade ( motor to starter panel), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. along with one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indication set. including installation, testing and commissioning. ( Make of pump-motor set - KSB /Texmo / CRI /Kirloskar /Crompton /Calama ) (Make of GI column pipe -Tata / Jindal /Bansal ) (Make of Copper conductor cable - Anchor/ KDK / Havells/ Finolex /Gloster / KEI /Polycab / RR Kabel ) | — | — | — | 1,62,509.92 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
EL-49-2025-26.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
GCCCorrectionslip1to10.pdf
ATTACHMENT
LEDstreetlight.pdf
ATTACHMENT
LED_Indoor_lighting_specifications_EOI.pdf RDSO Specification for indoor light
ATTACHMENT
LED_Indoor_lighting_specifications_EOI.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .