Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹8.4 L+₹1.5 L (20.9%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹8.5 L+₹1.5 L (22.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹8.8 L+₹1.8 L (26.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹9.6 L+₹2.6 L (38.1%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(KH) YOL
GE(KH) YOL, YOL CANTT, HP
REPAIR/MAINTAINANCE OF ELECTRIC OVER HEAD LINES AND POLES AT YOL CANTT UNDER GE(KH YOL
2022_MES_549550_1
GE/Y-29/2022-23
Open Tender
Civil Works
Item Rate
180 days
YOL CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE(KH) YOL
₹20,000
Yes
20 Oct 2022
2 Sept 2022
1 Oct 2022
2 Sept 2022
29 Sept 2022
16 Sept 2022
Amount
Cutting/Triming of tree branches under OH LT/HT electric line including cleaning upto 3.00m horizontal distance on both sides of OH electric line from ground level of the poles including removing all creepers small bushes etc of under OH line upto 60m each span, complete all as specified and directed.
Re-stretching of ACSR conductor and earth wire of any size and type on LT poles including disconnecting and re-binding with insulators with suitable size of binding wire after re-stretching, connecting jumpers, adjusting line dividers etc complete all as specified and directed.
Re-stretching of ACSR conductor and earth wire of any size and type on HT poles including disconnecting and re-binding with insulators with suitable size of binding wire after re-stretching, connecting jumpers, adjusting line dividers etc complete all as specified and directed.
Cutting and uprooting grass, vegetation shrubs, bushwood undergrowth, roots and trees not exceeding 30cm girth (measure one metre above ground level) in and around electrical sub stations, two/four pole structures and removing rubbish to a distance upto 50m outside the periphery of the area, complete all as specified and directed.
Pin type porcelain vitreous white brow or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade, complete all as specified, including taking down old insulators of any type, shape and size, all as specified.
Shackle type insulator porcelain vitreous white, brown or green 75mm high and 90mm dia for conductor of working pressure 1100 volts including galvanised mild steel straps of 31x3mm size, 12mm dia insulator bolts, washers and nuts, complete all as specified including taking down old insulators of any type, shape and size, all as specified.
Disc type insulator porcelain vitreous white, brown or green 145mm high and 255mm dia ball and socket type 'two-in-series' assembly for tension with tension clamps for conductor of working pressure 11000 volts, complete all as specified including taking down old insulators of any type, shape and size, all as specified.
Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo Amps for 11000 volts including taking down old unserviceable all as specified.
Supply and fixing jumper for LT/HT OH Lines with insulated with colour coding, (Red, Green, Blue) with all connected item i.e nut bolt, U G clamps etc. Upto length of size 3 to 5m, complete all as specified and directed.
M & L Replacement of guard wire shall be GI wire 4mm dia in accordance with guard wires shall be of sufficient current capacity to ensure rendering the line dead without risk of fusing or guard line, complete all as specified and directed.
Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with mild steel clamps, bolts and nuts of size 25mmx3mm flat iron, for LT, 20x15cm size, complete all as specified.
Supply and straining of Aluminium conductor steel reinforced (ACSR) of any size on LT over head line including necessary binding work, jumpering, maintaining proper sag as per IE rule including cutting of tree branches around the ACSR conductor within area of 5m complete including taking down old unserviceable all as specified.
Supply, installation, testing and commissioning gang operated air break off load connecting switch HT, 11KV, tripple pole, each plate consisting galvanised steel base, verticle type mounted on 12 No's post insulators and steel frame, non ferrous knife and spring loaded contacts, arcing horns complete with dropout fuse element assembly, operating rod of GI pipe, medium grade, 20mm dia (without joint) of suitable size and locking arrangement, connections, mild steel frame with PG clamps and sleeves etc required for current rating 200 amps capacity including taking down unservicable air break gang operated switch complete, all as specified and directed.
Painting to existing 04 pole structure steel tubular HT poles, 11 metres long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified & directed.
Painting to existing 03 Pole structure steel tubular HT poles, 11 metres long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified & directed.
Painting to existing 02 Pole structure steel tubular HT poles, 11 metres long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified & directed.
Painting to existing steel tubular LT poles, 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (Total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified & directed.
Painting to existing steel tubular LT poles, 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (Total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified & directed.
Painting to existing Prestressed concrete poles, 8.5m long with two coats of cement base paint including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (Total 5 Nos) with white and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified & directed
M & L for rubbing the background and using stensils reflected stiker of letter height not more than 50mm stiker having green background and white colour writing to indicate the street /security pole number, complete all as specified and directed.
Steel tubular swaged poles complete with base plate 8mm thick welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternately on external surface above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC including dismantling of old type of poles any length, complete all as specified and directed. Note : Excavation & earth work and PCC shall be measrued and paid separately.
Stay assembly complete with MS stay Plate 300X500X6mm thick galvanised stay rod 20mm dia 2.15m long with galvanised bow, galvanised thimble, stay clamp etc. complete all as shown on electrical Plate No.01 of SSR Part-I 2009, including taking down unservicable stay complete, all as specified and directed.Note (Excavation, earthwork, PCC work, loop type insulators and stay wire shall be measured and paid separatly.)
Galvanised stay strand strand, 7/4mm dia, complete all as specified.
Loop type insulator, porcelain, vitreous white, brown or green, large size with overall dimensions 90x140mm clearance of hole 25.5mm, including taking down existing unserviceable complete all as specified.
Excavation in trenches n.exc 1.5 metres wide and n.exc 1.5 metres deep and getting out in any type of soil, all as specified.
Excavation in trenches n.exc 1.5 metres wide and exc 1.5 metres and not exc 3 metres deep and getting out in any type of soil, all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick each layer of soil all as specified.
Removal of excavated material to be distance n.exc 50m and depositing where directed at a level n.exc 1.5m high from the starting point, all as specified.
PVC line seperator suitable for two ACSR Conductor feeder, complete all as specified.
PVC line seperator suitable for four ACSR Conductor feeder, complete all as specified.
Supply only rubber hand gloves (ISI) marked suitable for working with 11 KV HT lines, complete all as specified and directed.
Plain cement concrete M-7.5 nominal mix, type D-2 using 40mm graded crushed stone aggregate as in foundation of poles, stays etc. as mass concrete, complete all as specified.
Plain cement concrete M-10 nominal mix, type C-2 using 40mm graded crushed stone aggregate as in foundation of poles, stays etc. as mass concrete, complete all as specified.
Plain cement concrete M-15 nominal mix, type B-1 using 20mm graded crushed stone aggregate as in coping of pole including necessary form work, complete all as specified.
loose filling with broken/ crushed stone aggregate of size 20mm complete all as specified and directed.
Supply and fix in repair pole junction box sheet moulded compounded (SMC) type with hinged door and locking arrangement of size 200x140x95mm internal comprising one No SP MCB 6 Amps capacity and one No bakelite based neutral link one No earthing terminal and four Nos aluminium bus bar of suitable capacity including nuts, bolts, MS clamp etc, complete all as specified and directed.
M/S VIG AND COMPANY
M/S MALHI CONSTRUCTIONS
PAWAN KUMAR GOVT. CONTRACTORS
dinesh enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .