Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder. L1 | |
| 2 | L2₹13.9 L+₹7,831.50 (0.57%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹14.0 L+₹17,447.50 (1.26%)Rejected-Finance JAMKHUNTA P O GOELBHADI DIST BALANGIR 767032 | BALANGIR | ODISHA | 767032 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹14.2 L+₹37,487.50 (2.71%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹14.2 L+₹39,697.50 (2.87%)Rejected-Finance GANDAPATRAPALLI SAIRITALA BALANGIR 767032 | BALANGIR | BALANGIR | ODISHA | 767032 | L5 | Rejected-Finance Being L5 |
Tender Value
₹13.9 L
EMD Value
₹27,870
Closing Date
3 Jul 2023, 2:00 pmClosed
General Manager, O F Badmal, Balangir, Odisha
GENERAL MANAGER, O F BADMAL, BALANGIR,ODISHA, 767070
Urgent repair to culvert across the VIP road near Bachelor Mess-Electric pole No PPS-05 and PPS-04 towards Gate-1
2023_MIL_158819_1
3012/Genl/TE-07/EO(C)/2023-24
Open Tender
Civil Works
Item Rate
90 days
Ordnance Factory Badmal
As per NIT eligibility/evaluation criteria along with EMD.
3 documents required · 3 mandatory
₹0
₹27,870
28 Jul 2023
26 Jun 2023
6 Jul 2023
26 Jun 2023
3 Jul 2023
26 Jun 2023
Amount
Urgent repair to culvert across the VIP road near Bachelor's Mess(Electric pole No.PPS/05 & PPS/04 towards Gate-1)
Site Clearance including uprooting of bushes, thorny plants etc and removing surplus soil & debris to a distance n exc 50m and making the surface good.
Surface dressing not exceeding 15 cm deep in hard/dense soil including watering, and removing surplus soil to a distance n exc 50m and making good surface.
Dismantling of stone boulder masonary, built in cement mortar for portion to be ordered and removing from the premises to a lead of 100.00mtr.
Material and labour, for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:4
Walling of random rubble uncoarsed, well bonded, beded and solidly hearted built in cement mortar 1:4 except stone.
Boulder pitching, grouted with cement and sand mortar 1:6 (Except stone)
Material & labour for boulder pitching, grouted with cement and sand mortar 1:6
Excavating in trenches not exc. 1.5mtr wide and not exc. 1.5mtr depth for hard/dense soil and removing soil to a distance of 50.00mtr.
Material & labour for, Providing cement concrete 1:3:6 in foundations filling & mass concrete thick 100mm, Type C2 - 40mm graded aggregate.
Material & labour for, Providing cement concrete 1:2:4 with Type B1(20mm graded aggregate) in coping over the RR masonary wall.
Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses.
Supply and filling sand under floors or in foundations including watering and consolidation
M & L for providing reinforced cement concrete (design Mix) M-20 1:1.5:3 (20mm graded aggregate) in foundation including raft footings foundation beams plinth beams base for columns, under reamed piles and mass concrete.
Material & labour for providing cement concrete beams,(design Mix) M-20 1:1.5:3 (20mm graded aggregate) cantilevers, bressummers, lintels over 1.5m span
Material & labour for providing cement concrete columns, pillars, piers, posts and struts (design Mix) M-20 1:1.5:3 (20mm graded aggregate)
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
Form work to side of column, rough finished surfaces of concrete flat rough finished surface of concrete.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
Supply and fixing,for mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending etc. and binding with and including mild steel wire (annealed) not less than 0.9mm dia.
Supply and fixing,for Mild Steel TMT bars 8mm dia in stirrups, cut to length, bent to shape required, including cranking, bending etc. and binding with and including mild steel wire (annealed) not less than 0.9mm dia.
PRABIRA PADHIARY
JOGESWAR BAGARTY
Dhruba Charan Behera
ASHOK KUMAR SAMANTRAY
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .