PERIODICAL SERVICES TO OTM ACCN UNDER THE AREA OF AGE B/R-II UNDER GE (ARMY) NO.1 JODHPUR

Amount

M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.

All as per item No. 1.00 here-in-above, but as on ceiling surfaces complete all as specified and directed.

All as per item No. 1.00 here-in-above, but colour wash complete all as specified and directed.

M&L for preparation of old decorated wall surfaces plastered or unplastered, including cornices pilasters by brooming down or steel wire brushing and efforescent salts and applying one coat of distemper oil emulsion on wall (white or tinted), coloured and shade as approved by GE, complete all as specified and directed.

All as per item No. 4.00 here-in-above, but as on ceiling surfaces, complete all as specified and directed.

M&L for preparation of old decorated wall surfaces, including crack filling by compound of putty to get a uniform smooth surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying one coat of plastic emulsion on wall (white or tinted), coloured and shade as approved by GE, complete all as specified and directed.

M&L for preparation of old decorated wall surfaces plastered or unplastered and applying one coat of cement base paint on wall, coloured and shade as approved by GE, complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated / painted wall surfaces, plastered or unplastered and applying three coats of white wash on wall surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated / painted wall surfaces, plastered or unplastered and applying two coats of oil bound distemper white or tinted over & including M&L for 2 mm thick wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated / painted wall surfaces, plastered or unplastered and applying two coats of cement base paint over & including M&L for single coat of primer, complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .

All as per item No. 11.00 here-in-above, but steel surfaces, complete all as specified and directed.

Complete removal of existing cement base paint on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed.

M&L writing or repainting of existing letters or figures ( Block, Roman, Italian or Indian) n. exc. 30 cm high, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc surfaces and removing rubbish to out side MD land complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6 on stone or brick or concrete surfaces or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on stone or brick or concrete surfaces or RCC chajja or facia or on one side of lathing finished surface fair and even without using extra cement, complete all as specified and as directed.

M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 and finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash , complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash , complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted over & including M&L for 2 mm thick wall care putty , complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over & including M&L for single coat of primer, complete all as specified and directed.

M&L for Providing precast cement concrete type B-0 1:2:4 (12.5mm graded aggregate) set in CM 1:4 for louvres and jallies, cement grill any type model of zafri 35/40 mm thick (measured solid), including all mould- ings complete all as specified & directed by Engineer-in-charge.

M & L providing precast concrete Posts (100x100 x 750mm) of 1:3:6 type C0 using 12.50 mm graded stone aggregate as in RCC/PCC jali post setting in mortar 1:6 complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.

M&L for cleaning the existing reinf of slabs , chajjas etc to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain coat complete all as specified and directed.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on ceiling/Chajja surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

NOTE:- (i) The quoted rate are deemed to be inclusive of all scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures and finishes shall be carrying out upto and incl GF to G+4 bldgs

M/s Ajay kumar Garge (BID ID -3317191)

BEYLIM INFRA (BID ID -3317455)

M/S IK CONSTRUCTION (BID ID -3317364)

shree technology (BID ID -3310784)