Construction of building Additional accommodation at Govt. Senior Secondary School Jamna in Sub-Tehsil Kamrou District. Sirmour HP. ( SH- Construction of five rooms with verandah at First floor).

Amount

Providing form work with steel plates 3.15 mm. ( Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs (Four metre) and removal of the same for in situ reinforced concrete and plain concrete work including all leads, lifts and carriage of materials, as per entire satisfaction of Engieer-in-charge. a) Flat surfaces such as soffits of suspended floors, roofs, landing and the like Floors etc. upto 200mm. ( Two hundred milimetre) In thickness.

b) Sides and Soffits of beams, cantilever , girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtr. ( One metre) In depth in all heights from floor.

c) Edges of slabs and breaks in floors and walls under 20 (Twenty) centiMetres wide.

Providing and laying cement concrete 1:1½:3[ One cement isto One and half sand isto Three graded hard stone aggregate 20 (Twenty) millimetres nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work and reinforcement for reinforced concrete work, as per H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges. a) Suspended floors, roofs,landing, shelves and their supports, balconies, beams, girders and bressumers and cantilevers upto all floors, heights and levels

Providing tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete as per structural drawing in all floors up to all heights and levels, direction of Engineer-in-Charge and as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Second class half brick work using common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:6 ( One cement : Six sand ) in super structure above plinth level in all floors up to all heights and levels including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge

Squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:6 ( One cement : Six sand ) in Sqaure or rectangular pillars above plinth level in all floors up to all heights and levels including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge

Providing wooden work in frame in frame work of door, window clerstory window & others frams wrought framsed and fixed and fixed in position sal wood.Including carriage of material in all leads and lifts as per the direction of Engineer -in- Charge.

Providing and fixing 40mm ( Forty milimetre ) panelled glazed or panelled and glazed shutters doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws 2nd. class dedodar wood, in all respects as per Arch. Drawing and instruction of Engineer-n-Charge and as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 25mm thick (Twenty five milimeter) thick 2nd. class deodar wood panelled glazed or panelled and glazed shutters for cup board etc. including black enamelled iron butt hinges with necessary screws as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing wire gauge shutters using galvanized mild steel wire gauge of I.S. gauge designation 85 G (Eighty Five G) with wire of dia 0.56 (Zero point Five Six) millimeters for door, windows and clear story windows including bright finished black enameled iron hinges with necessary screws 30 mm. (thirty millimeter) thick second class deodar wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing 40*3 mm(Forty into three milimeter) flat iron hold fast 40 cm. (Forty centimeter) long including fixing to frame with 10mm diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30*10*15 Cm (Thirty into Ten into Fifteen centimeter) 1:3:6 (One cement : Three sand : Six graded stone aggregate 20mm Twenty mimlimeter) nominal size) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 250*16 (Two hundred fifty * Sixteen) millimetres size oxidized M.S. sliding Door Bolts with screws etc. Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 200*10 (Two hundred * Ten) millimetres size oxidized M.S. Tower bolts (barrel type) with screws etc. Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150*10 (One hundred fifty * Ten) millimetres size oxidized M.S. Tower bolts (barrel type) with screws etc. Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 125mm (One hundred twenty five) millimetres oxidized M.S. handles with screws etc. Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100mm (One hundred) millimetres oxidized M.S. handles with screws etc. Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150mm (One hundred fifty) millimetres oxidized M.S. hooks and eyes with screws etc. Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Mild Steel grills of required pattern in steel section frames of windows etc. with Mild Steel flats square or rounded bars with round headed bolts and nuts or by screws as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing glass strips in joints of floor 40mm wide and 4 mm(Four milimetres) thick as per HP.PWD specifications of 1990 ( One thousand nine hundred ninety) volume-I (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Cement concrete flooring 1:2:4 (One cement: two sand: four graded stone aggregate) 20mm (twenty millimetres nominal size) laid in One layer finished with floating coat of neat cement 40mm (forty) millimetres thick as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all floors including all leads lifts and all incidental charges.

Providing and fixing on wall face PVC (D-Plast) or equivlant rain water pipes 100 (One hundred ) millimetres. dia of working presser not less than 4.5 (Four point Five) kilograms per square Metre including fixing the joint with adhesive complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Providing and fixing mild steel holder bat clamps of approved design to100 (One hundred) millimetres dia PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centiMetre) of 1:2:4(one cement isto two sand isto four graded stone aggregate 20mm (twenty milliMetre) nominal size) and cost of cutting holes and making good the wall etc.:-100 mm dia (One hundred milliMetre ) dia as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing angle iron cupboard frames manufactured from M.S. angle iron section of 25x25x5 mm (twenty five into twenty five into five milimeter) thickness including hinges, jambs, lock jambs, beed and if required angle threshold of M.S.angle 25*25 mm ( (twenty five into twenty five mimiliter) thikness welded or rigidly fixed by mechanical means, lugs with split end tails to Each jamb including steel butt hinges 2.5 mm ( Two point five milimeter) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in -charge, and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint other than white, brushing to give an even shade including cleaning all dirt, dust and other foreign matter, sand papering and stopping as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

6(Six) millimetres thick plaster to ceiling in cement mortar 1:4(One cement isto Four sand) in all floors up to all heights and levels, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts , including all incidental charges.

15 (Fifteen) millimetres thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all heights and levels including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80(Eighty) millimetres in girth and finished even and smooth in cement mortar 1:6 (One cement isto Six sand), as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Ruled pointing on squared rubble coursed or un coursed stone masonry with cement mortar 1:3 ( One cement : Three Sand), as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

White washing with lime on un-decorated ceiling surfaces two coats to give and even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

White washing with lime on un-decorated wall surfaces two coats to give and even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

ajay sharma

anil chauhan

RAGHUBIR SINGH

SANCHIT GOEL