Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | ₹3.5 L | L1 | Accepted-AOC BEING THE LOWEST BIDDER HENCE AWARDED |
| 2 | L2₹3.8 L+₹25,585 (7.31%)Rejected-AOC | ₹3.8 L+₹25,585 (7.31%) | L2 | Rejected-AOC BEING THE SECOND LOWEST BIDDER HENCE REJECTED |
| 3 | L3₹3.9 L+₹37,152 (10.6%)Rejected-Finance | ₹3.9 L+₹37,152 (10.6%) | L3 | Rejected-Finance BEING THE THIRD LOWEST BIDDER HENCE REJECTED |
| 4 | L4₹4.0 L+₹54,282 (15.5%)Rejected-Finance | ₹4.0 L+₹54,282 (15.5%) | L4 | Rejected-Finance BEING THE 4 LOWEST BIDDER HENCE REJECTED |
| 5 | L5₹4.2 L+₹67,136 (19.2%)Rejected-Finance | ₹4.2 L+₹67,136 (19.2%) | L5 | Rejected-Finance BEING THE HIGHEST BIDDER HENCE REJECTED |
| Sl No | Description | Qty | Unit | P RAMACHANDRAN L5 | KRISHNA DASAN C K L4 | shanto jose L1 | MUHAMMED ALI P.S. L3 | ANWAR V A L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00Improvement work of Roof Truss work at Kulappully Section under Ottappalam Range | ||||||||
| 1.01 | 2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil | 0.48 | cum | 300 ₹144 | 324.1 ₹155.57 | 280.58 ₹134.68 Lowest | 310.36 ₹148.97 | 301.09 ₹144.52 |
| 1.02 | 4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4
coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources) | 0.08 | Cum | 7,250 ₹580 | 7,147.53 ₹571.8 | 6,187.65 ₹495.01 Lowest | 6,844.49 ₹547.56 | 6,639.83 ₹531.19 |
| 1.03 | 50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete | 855.97 | kg | 180 ₹1,54,074.24 Lowest | 208.06 ₹1,78,092.7 | 180.12 ₹1,54,176.96 | 199.24 ₹1,70,543.06 | 193.29 ₹1,65,448.69 |
| 1.04 | 50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete | 390.96 | kg | 180 ₹70,372.8 | 168.53 ₹65,888.49 | 145.89 ₹57,037.15 Lowest | 161.38 ₹63,093.12 | 156.56 ₹61,209.03 |
| 1.05 | 4.1.4
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2
coarse sand (zone-III) derived from natural sources : 4 graded
stone aggregate 40 mm nominal size derived from natural sources) | 1.04 | cum | 8,500 ₹8,857 | 8,165.45 ₹8,508.4 | 7,068.87 ₹7,365.76 Lowest | 7,819.26 ₹8,147.67 | 7,585.45 ₹7,904.04 |
| 1.06 | 5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete | 4.68 | sqm | 1,750 ₹8,190 | 347.93 ₹1,628.31 | 301.2 ₹1,409.62 Lowest | 333.17 ₹1,559.24 | 323.22 ₹1,512.65 |
| 1.07 | 12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | 146.16 | sqm | 800 ₹1,16,928 | 758.68 ₹1,10,888.67 | 656.86 ₹96,006.66 Lowest | 726.59 ₹1,06,198.39 | 704.87 ₹1,03,023.97 |
| 1.08 | 12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete
:Ridges plain (500-600 mm) | 4.6 | Mtr | 500 ₹2,300 | 509.11 ₹2,341.91 | 440.73 ₹2,027.36 Lowest | 487.52 ₹2,242.59 | 472.95 ₹2,175.56 |
| 1.09 | OD113692/2025-2026
Supplying and fixing rectangular Rain water Upvc gutter pipe 200 mm wide with
upvc drop and end drop including clamps 1 m c/c including all labour charge etc
complete | 28.5 | mtr | 500 ₹14,250 | 501.32 ₹14,287.62 | 433.99 ₹12,368.72 Lowest | 480.07 ₹13,681.99 | 465.72 ₹13,272.88 |
Tender Value
₹5.4 L
EMD Value
₹13,500
Closing Date
2 Jul 2026, 5:00 pmClosed
Divisional Forest Officer, Palakkad
KALLEKULANGARA
Improvement work of Roof Truss work at Kulappully section under Ottapalam Range during 2026-27
2026_FD_857117_2
KFDDO/37765-2026/DFOPKD/D
Open Tender
Civil Works - Others
Item Wise
120 days
Kulappully
Please refer tender notice
8 documents required · 8 mandatory
₹1,100
Yes
₹13,500
Yes
23 Jul 2026
25 Jun 2026
4 Jul 2026
25 Jun 2026
2 Jul 2026
25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Improvement work of Roof Truss work at Kulappully Section under Ottappalam Range | |||||
| 1.01 | 2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.02 | 4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4
coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources) | 1 | Cum | - | - |
| 1.03 | 50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete | 0.2 | kg | - | - |
| 1.04 | 50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.05 | 4.1.4
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2
coarse sand (zone-III) derived from natural sources : 4 graded
stone aggregate 40 mm nominal size derived from natural sources) | - | cum | 1 | - |
| 1.06 | 5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete | 1 | sqm | - | - |
| 1.07 | 12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | 1 | sqm | 1 | ₹1 |
| 1.08 | 12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete
:Ridges plain (500-600 mm) | 1 | Mtr | 1 | ₹1 |
| 1.09 | OD113692/2025-2026
Supplying and fixing rectangular Rain water Upvc gutter pipe 200 mm wide with
upvc drop and end drop including clamps 1 m c/c including all labour charge etc
complete | - | mtr | 1 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.75 MB
priliminaryagreement.pdf
Tender Documents • 0.24 MB
SCHEDULE.pdf
Tender Documents • 0.79 MB
ePayment.pdf
Other Document • 0.01 MB
BOQ_1449659.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .