CA NO GE(N)AMB-80/2026-27 ADDN/ALTN TO FLOORING, WALL PANELING AND ALLIED ELECTRICAL WORKS TO BLDG NO P-02 OF HQ CORPS UNDER AGE B/R-II OF GE (N) AMBALA CANTT

Schedule 'A' Part-I (B/R itmes) Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed .

Material and labour for Vitrified ceramic tiles 9-10mm thick (Square/rectangular) polished area of each tiles exc 0.42 Sqm but n. exc 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over & including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed .

Material and labour for Vitrified ceramic tiles 9-10mm thick (Square/rectangular)polished area of each tiles exc 0.42 Sqm but n. exc 1.00 Sqm and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over and incl backing coat 10 mm thick in cement mortar 1:4 for laying skirting/ dados and vertical surfaces etccomplete all as specified and directed .

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

Material and labour for premium quality wooden wall panelling using High-Density High-Moisture-Resistant (HDHMR) board in two layers. First layer of 18mm thick (HDHMR) board fixed to wall with screws etc. & than making frame work on it using (HDHMR) board fillets of size exceeding 13 sqcm but not exceeding 25 sqcm of sectional area with horizontal & vertical spacing @1.20m c/c and than fixing 2nd layer of 18mm thick (HDHMR) board to frame work, including 03 to 04 mm thick natural wood sliced veneers ply, design /shade as approved by GE /Engr-In-Charge, fixed on (HDHMR) board with appropriate bonding or fixing material /resins etc., including interlocking precision joint for tight & clean alignment and making designer wooden cornices etc and applying two or more coats or melamine polish by using spray gun and including preparation of base on veneers ply by applying melamine sealers etc. to make it glossy smooth surface. The unit rate also including for making necessary openable shutter /covers with connected accessories for electric switch /socket board of appropriate size in wall panelling complete all as specified and directed. Note : The design/ shade of veneers ply and shade/colour of melamine polish shall be approved by Engr-In-Charge/GE

Material and labour for 25 mm thick PCC cement concrete type B-0, 1:2:4 (using 12.50mm graded stone aggregate) in floor as PCC base padding for tiling/wooden flooring etc complete all as specified and directed .

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface including any sunk or raised moulding at different levels with approved design/pattern for fans/lights if any over GI frame work and reinforced with G.I. wire mesh of galvanised steel wire 1.40mm dia and size of mesh 12mm fixed with tinned tacks of stainless steel staples/self tapping screws and washers including providing and fixing of GI perimeter channel of 0.5 to 0.6 mm thickness with GI suspension rods, compatible connectors for false ceiling including two coats of premium acrylic emulsion paint over a coat of primer on ceiling surfaces, complete all as specified and directed.

Schedule 'A' Part-II (E/M itmes) Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed.

Material and labour for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 1.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes made out of mild steel sheet metal conforming to IS-5139(pt-1) of 1969 and IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. :- Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted. 2. Only switch, socket and fan regulators to be measured and paid seperately.

Description all as per serial item No.09 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed.