ADDN/ALTN AND SPECIAL REPAIR TO BUILDING P-52 AND T-24 COMNETCEN KOCHI AND PROVISION OF GEYSERS AT CERTAIN HOUSES AT SMA NAVAL BASE KOCHI

Amount

Dismantling plain or corrugated steel sheeting, any guage, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling structural steel work such as brackets for rain water pipe, gutter, gate etc.complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for Rolled sections (Tublar sections) as in main and cross beams, hip and jack rafters; purlins , wall framing ,where connected to common rafters and fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkats with shutters of area exc 1.5 Sqm but n.ex 4.00 sqm each without taking off shutters from frame complete all as specified and as directed.

S&F Powder coated anodised aluminium frame for door/window with or more rebates including joining cleat for fixing etc. complete all as specified and as directed..

S & F Powder coated anodised aluminium window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S & F Powder coated anodised aluminium 5mm dia hexagonal channel for grill (Decogrill)fixed to aluminium frame with aluminium bidding complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F 35 mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners complete all as specified and as directed.

S&F 2nd class hard wood, 35 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); supplied & fitted to Chowkats complete all as specified and as directed.

S&F 150 mm long aluminium handle cast type anodized complete all as specified and directed.

S&F 125mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, complete all as specified and as directed.

M/L preparation of new wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete

Supply, providing and fixing in repair suspended false ceiling consisting of 8mm thick calcium silicate seamless board suspended on GI framework with staggered joints, GI framework to consist GI perimeter channel 25mmX20mm of 22 gauge along perimeter of false ceiling. Channel section of 50X25mm of 22 gauge and at 300mm centre to centre throghout one way fixed with screw/nut bolt and other direction 40x15 mm 22 gauge channel provided with interlocking with GI cleat and expansion fastnors including hangers 6mm dia GI fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsm board with joining compound paper tape and two coat plasting emulsion paint over one coat of primer and one layer of putty 3mm thick in three layers suitable for calcium silicate board( as per the recommendations/ practice) ncluding necessary scaf folding and shuttering complete as directed as specified and directed

Demolition of brick work / PCC block masonry built in cement mortar including all quoins, arches, pillars, etc. all as specified and as directed

Demolition of reinforced cement concrete in roofs floors ( other than ground floors) beams, lintels and similar work all as specified and as directed

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep and getting out in loose/soft soil complete all as specified and as directed.

M&L Cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and completed.

M&L for Plain cement concrete 1:2:4, type B 1 as in foundation, filling & mass concrete complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified and as directed.

Removal of surplus soil to a distance n.exc. 50 m and n.exc. 1.5 m above the starting point complete all as specified and as directed.

Pre-cast cement concrete block masonry with solid blocks in PCC 1:3:6, exc. 10 cm in width and setting in mortar in CM 1:6, complete all as specified and as directed.

M & L formwork to sides and soffits of beams, lintels, plinth beam ,cantilevers etc complete all as specified and as directed.

M & L RCC type B1 1:2:4 (20 mm graded stone aggregate) in beams, cantilevers, lintel etc complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, lintels hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

S&F 6 to 8mm dia TMT bars in reinforcement cut to length, bent to shape required incl cranking, bending hooking and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Rendering 10mm thick in CM 1:6 internally on brick or concrete surfaces of wall including finishing even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, ceiling including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for preparation new plastered internal surfaces and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for cement plaster in two coat 8 mm thick in cement mortar 1:4 Using WPC over 12mm in cm 1:6 on external surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation new plastered external surfaces and application of one coat of base coat for Apex Ultima Protek or equivalent with exterior putty and allowed to dry overnight before applying first coat of antifungal paint complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of antifngal paint (Apex Ultima Protek or equivalent from list of manufactures) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of antifungal paint( Apex Ultima Protek or equivalent from list of manufactures) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

M&L for Taking down of existing treatment and application of one coat of base coat of apex ultima protek( or equivalent from list of manufactures )with exterior putty and allowed to dry overnight before applying first coat of antifungal paint complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of antifngal paint (Apex ultima Protek or equivalent make mentioned in list of manufactures) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of antifngal paint (Apex ultima Protek or equivalent make mentioned in list of manufactures) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

M&L for preparation and taking down of existing treatment and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick cement concrete type D2 1:4:8 with 40mm graded aggregate as in sub base complete complete all as specified and as directed.

M&L for joint free coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed of CM 1:6 all as specified and directed.

All as per item No: 50 here-in-before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tk screed bed of CM 1:6 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x7 mm thick in vertical surface set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over 10 mm thick rendering CM 1:4 complete all as specified and as directed.

M&L for M.S Hold fasts of FI 25 x 3 mm complete all as specified and as directed.

S&F solid PVC Door Frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified.

S&F in repairs viterous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float & handle incl brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs 630 X 450 mm Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand including 15mm bore fancy type Brass CP pillar tap, PVC connection 600mm long and 15mm bore stop cock complete all as specified and directed.

S&F in repairs 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repairs 15mm bore Chromium plated fancy type Bib taps complete all as specified and as directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repairs 600 mm long, 20mm dia brass chromium plated tubular towel rail complete all as specified and as directed.

S&F in repairs 75 mm PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

All as per item No: 66 here-in-before but 110mm dia pipes complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends single socketed in any length, with rubber rings complete all as specified and as directed.

All as per item No: 66 here-in-before but 110mm dia complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes vent cowl complete all as specified and as directed.

S&F in repairs vitreous china urinals coloured half stall type including all fittings complete all as specified and as directed.

S&F in repairs Chinaware partition for urinal of size 310 x 700 mm all as specified and as directed.

S&F in repairs CP urinal spreader for 15 mm bore fixed with urinal including CP pipe complete all as specified and as directed.

M&L for Virified double/ ultra charged stain free tiles of size 800x800, 9 to 10 mm thick with approved pattern and colour borders over cement screed 10 mm thick in CM 1:4 over 25 mm thick PCC type B0 1:2:4 levelling course on RCC slab complete all as specified and directed

All as per serial item No 75 herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:3 all as specified and directed by Engineer in charge.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thick screed in CM 1:4 complete all as specified and as directed..

M&L kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick rendering in CM 1:3 complete all as specified and as directed.

Supply only Water Proofing Compound complete all as specified and as directed.

M&L point wiring with 4.0 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting, modular white cover plate,flush metal box etc incl 4.0 Sqmm PVC insulated copper conductor as earth continuity wire for sheet metal enclosure complete all as specified and as directed.

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB ,10 KA, B curve complete all as specified and as directed.

S&F SPN sheet metal enclosure for DB 4 ways Double door ,including taking down old one complete all as specified and as directed.

S&F MCB 'B' Curve 40 Amp ,10KA SPN ,240 Volts rupturing capacity 10KA,type B,including taking down old one complete all as specified and as directed.

S&F MCB 'B' Curve SP 6 To 32 Amp , 10KA 240 Volts, rupturing capacity 10KA,type B including taking down old one complete all as specified and as directed.

M/L submain wiring with 2 single core 10 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid suitable conduit of ISI marked concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 10 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble,including taking down old one complete all as specified and as directed. Note: two run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

M&L for earthing complete with galvanised steel earth plate elctrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.point 3 connected to earthing test point all as specified or indicated including testing on completion.

M&L for dismantling of existing panel including disconnecting cables, etc. and supply, installation, testing and commissioning of factory made LT cubical panel, INDOOR TYPE wall mounted Suitable to accommodate the following accessories made out of CRCA sheet 2 MM thick duly powder coated with Seimens grey shade RAL 7032, totally enclosed, dust and vermin proof with working voltage of 415V, 50 Hz, 3 phase 4 wire, Bus bars provided shall be adequately supported on insulators to withstand dynamic stresses due to short circuit current and shall be suitably colour coded with heat shrinkable sleeve for phase indication. The standard phase arrangement when facing the switchgear shall be R-Y-B from left to right. The bus bar connections and their insulated supports shall be mechanically strong, and shall withstand all the stresses which shall be imposed upon them in ordinary working due to fixing, vibration, fluctuation in temp., shot-circuit or other causes. The bus bar will be supported on DMC. Provision shall be made for expansion and contraction of the bus bars and connections with variation of temp. Internal wiring should be done with 2.5 sqmm multi-stranded copper conductors and shall be properly bunched, tied, ferruled for proper identification, crimped and shall be connected with suitable lugs and PVC sleeves, etc. The bottom of the panel should contain detachable plate having provision for entry of armored cable of adequate size with glands. Threaded earthing studs - 02 Nos shall be provided at the bottom and lifting lugs of suitable size at top to lift the panel safely

M&L for dismantling of existing panel including disconnecting cables, etc. and supply, installation, testing and commissioning of factory made LT cubical panel, INDOOR TYPE wall mounted Suitable to accommodate the following accessories made out of CRCA sheet 2 MM thick duly powder coated with Seimens grey shade RAL 7032, totally enclosed, dust and vermin proof with working voltage of 415V, 50 Hz, 3 phase 4 wire, Bus bars provided shall be adequately supported on insulators to withstand dynamic stresses due to short circuit current and shall be suitably colour coded with heat shrinkable sleeve for phase indication. The standard phase arrangement when facing the switchgear shall be R-Y-B from left to right. The bus bar connections and their insulated supports shall be mechanically strong, and shall withstand all the stresses which shall be imposed upon them in ordinary working due to fixing, vibration, fluctuation in temp., shot-circuit or other causes. The bus bar will be supported on DMC. Provision shall be made for expansion and contraction of the bus bars and connections with variation of temp. Internal wiring should be done with 2.5 sqmm multi-stranded copper conductors and shall be properly bunched, tied, ferruled for proper identification, crimped and shall be connected with suitable lugs and PVC sleeves, etc. The bottom of the panel should contain detachable plate having provision for entry of armored cable of adequate size with glands. Threaded earthing studs - 02 Nos shall be provided at the bottom and lifting lugs of suitable size at top to lift the panel safely

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed.

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia complete all as specified and directed.

Supply and fix in repair on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed.

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directed . (Make : Model NO: F2002362 of Cera or equivalent make mentioned in list of manufactures)

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2004201 of Cera or equivalent make mentioned in list of manufactures)r)

M/L for cutting chasses on walls floor etc not exceeding 20 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness, above ground level in the foundation complete all as specified and directed .

Material and labour for cement concrete in foundations, filling and mass concrete type 1:3:6(40mm graded aggregate) complete all as specified and directed .

Supply and fixing of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters complete all as specified and directed .

S& F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

M & L for CPVC Ball Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

M & L for CPVC Ball Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S/F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.

Supply & fix water heater storage type, electric,capacity 25 litres, white , inner storage tank of steel BEE 5 star rated complete all as specified including good suface of wall complete all as specified and directed . Make:- Havells Monza DX GHWAMGSIB025/Crmpton Cat part No. ASWH-3525/Jaquar cat part No. MET-WHT-V025 or equivalent items from list of manufactures

S&F chromium plated pipe for hot & cold water as per suitable length 12mm dia with two brass adopter and connecting up complete all as specified and directed.

Supply and fixing of Bip cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2004151 of Cera or equivalent manufacturer mentioned in list of manufactures)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic on wall except beam, column and RCC roof and chases cutting incl 1.6 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover ISI marked including 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch.

All as per item No 108.above but for one 5 pin 5 amps socket outlet an independent board.

All as per item No 108 above but with 2.5 Sqmm copper conductor including 1.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board.

S & F switch socket combination 5 Amps, 5 pin 2 in 1 , complete all as specified and as directed.

S & F switch socket combination multipurpose 5 & 15 Amps, 5 pin, 2 in 1 complete all as specified and directed

S & F fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and as directed.

Supply and fixing of heavy duty exhaust fans metallic body AC single phase 230/ 240 V of size 300 mm sweep all as specified and directed model -Turboforce SP or equivalent make mentioned in list of manufactures)

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make : Havells Cat Part No. REGALBATTENT8 upto 1x822W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or Surya/Wipro complete all as specified and directed

S&F LED ceiling light fitting 2'x2' 36 Watt recessed full lit luminaire with glare free uniform illumination (100 lumen/watt) Make : Crompton Cat Part No. LCTLRF6-36-CDL or equivalent make mentioned in list of manufactures)

S & F in repair Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified

S&F MCB SPN 6 to 32 Amp ,240 Volts,10 KA ,B curve including taking down old one all as specified and directed.

M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated copper conductor multistranded cable drawn in and including PVC conduit including one run of 4 Sqmm multi stranded copper conductor cable for earth condinuity wire. Note : Two runs of PVC cable 4 sqmm and one run of 4 sqmm earth condinuity conductor cable as earth continuity wire and pvc conduit of suitable dia ISI marked will be measured as one unit length.

M & L Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c , 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion completeall as specified. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

Taking down old stop valve,stop cock,bib cock ,swivel shower,health faucet from existing position including all fittings all as specified and as directed.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm complete all as specified and as directed.

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT complete all as specified and as directed.

S/F of Health faucet 1 Mtr flexible tube with wall hook complete all as specified and as directed.. (Make :- Jaquar, Cat No. ALD 565 or equivalent of CERA/PRAYAG)

Supply & fixing of PVC connections 15mm size with PTMT nuts of length 450 mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and as directed.

Taking down old unsv GI tubing of size 25mm complete all as specified and as directed.

Taking down old unsv GI tubing of size 20mm complete all as specified and as directed.

S&F framed work (Fe 410W (grade E 250) quality A as in grill/grating or gates of angle or other section with gusset plates,rails,braces etc complete fastening and fixing complete all as specified and directed

S&F of welded galvanised steel wire fabric in n exc 4 Kg per Sqm to wood or steel members complete all as specified and directed.

K.V.GEORGE AND COMPANY

SUKU CONSTRUCTIONS

M.J.JOY AND COMPANY

WELTRONENGINEERINGSERVICES

Anaswara Constructions